kemna666/kongxianghan
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
kongxianghan/target/linux/generic/files/drivers/platform/mikrotik/Kconfig

25 lines
598 B
Plaintext
Raw Normal View History

generic: routerboot sysfs platform driver This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-03-22 21:46:42 +01:00
menuconfig MIKROTIK
bool "Platform support for MikroTik RouterBoard virtual devices"
help
Say Y here to get to see options for the MikroTik RouterBoard platform.
This option alone does not add any kernel code.
if MIKROTIK
config MIKROTIK_RB_SYSFS
tristate "RouterBoot sysfs support"
generic: platform/mikrotik: reorder Kconfig The depends and select should apply to the sysfs driver, not the meta config. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-16 08:14:48 +02:00
depends on MTD
select LZO_DECOMPRESS
generic: routerboot sysfs: add support for soft_config This driver exposes the data encoded in the "soft_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "soft_config" through a set of human-and-machine-parseable attributes. Changes can be discarded by writing 0 to the 'commit' attribute, or they can be committed to flash storage by writing 1. This driver does not reuse any of the existing code previously found in the "rbcfg" utility and makes this utility obsolete by providing a clean sysfs interface. Like "rbcfg", this driver requires 4K_SECTORS support since the flash partition in which these parameters are stored is typically 4KB in size. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-13 22:12:41 +02:00
select CRC32
generic: routerboot sysfs platform driver This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-03-22 21:46:42 +01:00
help
This driver exposes RouterBoot configuration in sysfs.
generic: platform/mikrotik: add NVMEM layout driver Currently, information from MikroTik hard_config is only available via sysfs, meaning that we have to rely on userspace to for example setup MACs. So, lets provide a basic NVMEM layout based driver to expose the same cells as sysfs driver exposes. Do note that the we dont extract the WLAN caldata and BDF-s at this point. Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Link: https://github.com/openwrt/openwrt/pull/15665 Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-06-09 12:14:25 +02:00
config NVMEM_LAYOUT_MIKROTIK
tristate "RouterBoot NVMEM layout support"
depends on NVMEM_LAYOUTS
help
This driver exposes MikroTik hard_config via NVMEM layout.
generic: routerboot sysfs platform driver This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-03-22 21:46:42 +01:00
endif # MIKROTIK
Reference in New Issue Copy Permalink