kongxianghan/target/linux/generic/files/drivers/platform/mikrotik/Makefile

#
# Makefile for MikroTik RouterBoard platform specific drivers
#
obj-$(CONFIG_MIKROTIK_RB_SYSFS)     += routerboot.o rb_hardconfig.o rb_softconfig.o
obj-$(CONFIG_NVMEM_LAYOUT_MIKROTIK)     += rb_nvmem.o
generic: routerboot sysfs platform driver This driver exposes the data encoded in the "hard_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "hard_config". The WLAN calibration data is available on demand via the 'wlan_data' sysfs file in that folder. This driver permanently allocates a chunk of RAM as large as the "hard_config" MTD partition (typically 4KB), although it is technically possible to operate entirely from the MTD device without using a local buffer (except when requesting WLAN calibration data), at the cost of a performance penalty. This driver does not reuse any of the existing code previously found in routerboot.c. This driver has been successfully tested on BE (ath79) and LE (ipq40xx and ramips) hardware. Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Tested-by: Baptiste Jonglez <git@bitsofnetworks.org> Tested-by: Tobias Schramm <t.schramm@manjaro.org> Tested-by: Christopher Hill <ch6574@gmail.com> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> 2020-03-22 21:46:42 +01:00			`#`
			`# Makefile for MikroTik RouterBoard platform specific drivers`
			`#`
generic: routerboot sysfs: add support for soft_config This driver exposes the data encoded in the "soft_config" flash segment of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder named "soft_config" through a set of human-and-machine-parseable attributes. Changes can be discarded by writing 0 to the 'commit' attribute, or they can be committed to flash storage by writing 1. This driver does not reuse any of the existing code previously found in the "rbcfg" utility and makes this utility obsolete by providing a clean sysfs interface. Like "rbcfg", this driver requires 4K_SECTORS support since the flash partition in which these parameters are stored is typically 4KB in size. Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org> 2020-05-13 22:12:41 +02:00			`obj-$(CONFIG_MIKROTIK_RB_SYSFS) += routerboot.o rb_hardconfig.o rb_softconfig.o`
generic: platform/mikrotik: add NVMEM layout driver Currently, information from MikroTik hard_config is only available via sysfs, meaning that we have to rely on userspace to for example setup MACs. So, lets provide a basic NVMEM layout based driver to expose the same cells as sysfs driver exposes. Do note that the we dont extract the WLAN caldata and BDF-s at this point. Reviewed-by: Thibaut VARÈNE <hacks@slashdirt.org> Link: https://github.com/openwrt/openwrt/pull/15665 Signed-off-by: Robert Marko <robimarko@gmail.com> 2024-06-09 12:14:25 +02:00			`obj-$(CONFIG_NVMEM_LAYOUT_MIKROTIK) += rb_nvmem.o`