08f1e1b3ac
In order to set the multicast rate for mesh point interfaces the "mesh join" was made explicit and moved to mac80211_setup_vif(), similar to how it is done for IBSS interfaces. Previously, the mesh join was made implicit in case authentication (i.e. $key) was not used when creating the interface in mac80211_prepare_vif(), while using authentication would create the interface first, then join later in mac80211_setup_vif() by starting authsae. Signed-off-by: Nils Schneider <nils@nilsschneider.net> SVN-Revision: 47408
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org