* Add chat template formatting to -no-cnv
* only enable prompt formatting if explicitly enabled
* add -st / --single-turn
* add --single-turn and -p in conversation mode
* fix -sys + -p
* reword warning
* small readability change and fix (long) outdated example usage
* only activate single turn in conversation mode
* Use jinja chat template system prompt by default
* faster conditional order
* remove nested ternary
---------
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
---------
Co-authored-by: Xuan Son Nguyen <thichthat@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
Co-authored-by: Xuan Son Nguyen <son@huggingface.co>
* cli : auto activate conversation mode if chat template is detected
* add warn on bad template
* update readme (writing with the help of chatgpt)
* update readme (2)
* do not activate -cnv for non-instruct models
* sampling : refactor + optimize penalties sampler
ggml-ci
* common : apply ignore_eos as logit bias
ggml-ci
* batched : remove penalties sampler
* params : allow penalty_last_n == -1 to be equal to context size
ggml-ci
* common : by default, move the penalties at the end of the sampling chain
ggml-ci
* common : ignore all EOG tokens
Co-authored-by: Diego Devesa <slarengh@gmail.com>
* common : move back the penalties at the front of the sampling chain
ggml-ci
* readme : restore hint about --ignore-eos flag [no ci]
* llama : minor
ggml-ci
* webui : update
---------
Co-authored-by: Diego Devesa <slarengh@gmail.com>
* readme : document --no-display-prompt
* readme : update default prompt context size
* readme : remove unnecessary indentation
Indenting a line with four spaces makes Markdown treat that section as
plain text.
* readme : indent commands under bullets
* readme : indent commands in lettered list
* Initial XTC commit
Adds XTC sampler, not activated by default, but recommended settings by default.
* Cleanup
* Simplified chances calculation
To be more inline with the original implementation, chance is calculated once at the beginning.
* First fixes by comments
Still need to look into sorting
* Fixed trailing backspaces
* Fixed RNG to be reproduceable
Thanks to @slaren for directions
* Fixed forgotten header
* Moved `min_keep`
Moved from conditions to a simple check at the end.
* Fixed broken randomization
Thanks to @slaren for explanation
* Swapped sorting for a custom algorithm
Shifts tokens to remove the penalized ones, then puts the penalized at the back. Should make `min_keep` still viable.
* Algorithm rework
1. Scan token from top till the first non-penalizable
2. Remove the last captured token (the least probable above threshold)
3. Shift all tokens to override the remaining penalizable
4. Penalize and put them at the the bottom.
* Added XTC to `test-sampling`
* Simplified algorithm and more tests
* Updated info in common and args
* Merged back lost commits in common and arg
* Update dump info in common
* Fixed incorrect min_keep check
* Added XTC to README
* Renamed parameters, fixed info and defaults
* probability is at 0 by default, but XTC is included in sampling queue
* threshold higher than 0.5 switches XTC off
* Initial server support
* Added XTC to server UIs
* Fixed labels in old server UI
* Made algorithm safer and more readable
* Removed xtc_threshold_max
* Fixed arg after update
* Quick fixes by comments
* Simplified algorithm since threshold_max is removed
* Renamed random distribution
* Fixed tests and outdated README
* Small fixes
* added cli arg to disable context shift
* reverted precommit
* updated README.md for main
* white space
* allow disabling context shift in the server
* Update common/arg.cpp
no-context-shift only works for main example
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
* added server example to --no-context-shift args
* removed server changes
* white space
---------
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
- Add `struct llama_sampler` and `struct llama_sampler_i`
- Add `llama_sampler_` API
- Add `llama_sampler_chain_` API for chaining multiple samplers
- Remove `LLAMA_API_INTERNAL`
- Add `llama_perf_` API and remove old `llama_print_timings` and `llama_reset_timings`
* Introduce ggml_compute_threadpool
- OpenMP functional: check
- Vanilla ggml functional: Check
- ggml w/threadpool functional: Check
- OpenMP no regression: No glaring problems
- Vanilla ggml no regression: No glaring problems
- ggml w/threadpool no regression: No glaring problems
* Minor fixes
* fixed use after release bug
* fixed a harmless race condition
* Fix Android bulid issue
* fix more race conditions
* fix deadlock for cases where cgraph.n_nodes == 1
and fix --poll case
* threadpool: use cpu_get_num_math to set the default number of threadpool threads
This way we avoid using E-Cores and Hyperthreaded siblings.
* bench: create fresh threadpool for each test
For benchmarking it's better to start a fresh pool for each test with the exact number of threads
needed for that test. Having larger pools is suboptimal (causes more load, etc).
* atomics: always use stdatomics with clang and use relaxed memory order when polling in ggml_barrier
This also removes sched_yield() calls from ggml_barrier() to match OpenMP behavior.
* threadpool: make polling the default to match openmp behavior
All command line args now allow for setting poll to 0 (false).
* threadpool: do not wakeup threads in already paused threadpool
* fix potential race condition in check_for_work
* threadpool: do not create two threadpools if their params are identical
* threadpool: reduce pause/resume/wakeup overhead in common cases
We now start threadpool in paused state only if we have two.
The resume is now implicit (ie new work) which allows for reduced locking and context-switch overhead.
* threadpool: add support for hybrid polling
poll params (--poll, ...) now specify "polling level", i.e. how aggresively we poll before waiting on cond.var.
poll=0 means no polling, 1 means poll for 128K rounds then wait, 2 for 256K rounds, ...
The default value of 50 (ie 50x128K rounds) seems like a decent default across modern platforms.
We can tune this further as things evolve.
* threadpool: reduce the number of barrier required
New work is now indicated with an atomic counter that is incremented for
each new graph that needs to be computed.
This removes the need for extra barrier for clearing the "new_work" and
removes the special case for trivial graphs.
* threadpool: remove special-casing for disposable threadpools
With the efficient hybrid polling there is no need to make disposable pools any different.
This simplifies the overall logic and reduces branching.
Include n_threads in debug print for disposable threadpool.
Declare pause and stop flags as atomic_bool
This doesn't actually generate any memory barriers and simply informs
the thread sanitizer that these flags can be written & read by different
threads without locking.
* threadpool: do not clear barrier counters between graphs computes (fixes race with small graphs)
This fixes the race condition with very small graphs where the main thread happens to
start a new graph while the workers are just about to exit from barriers.
* threadpool: use relaxed order for chunk sync
Full memory barrier is an overkill for this since each thread works on different chunk
* threadpool: remove abort_callback from threadpool state
* threadpool: better naming for thread/cpumask releated functions
* threadpool: consistent use of int type for n_threads params
* threadpool: add support for ggml_threadpool_params_default/init
Also removes the need for explicit mask_specified param.
all-zero cpumask means use default (usually inherited) cpu affinity mask.
* threadpool: move typedef into ggml.h
* threadpool: fix apply_priority() function name
* threadpool: fix swift wrapper errors due to n_threads int type cleanup
* threadpool: enable --cpu-mask and other threadpool related options only if threadpool is enabled
* threadpool: replace checks for compute_thread ret code with proper status check
* threadpool: simplify threadpool init logic and fix main thread affinity application
Most of the init code is now exactly the same between threadpool and openmp.
* threadpool: update threadpool resume/pause function names
* threadpool: enable openmp by default for now
* threadpool: don't forget to free workers state when omp is enabled
* threadpool: avoid updating process priority on the platforms that do not require it
On Windows we need to change overall process priority class in order to set thread priorities,
but on Linux, Mac, etc we do not need to touch the overall process settings.
* threadpool: update calling thread prio and affinity only at start/resume
This avoids extra syscalls for each graph_compute()
* llama-bench: turn threadpool params into vectors, add output headers, etc
* llama-bench: add support for cool off between tests --delay
This helps for long running tests on platforms that are thermally limited (phones, laptops, etc).
--delay (disabled by default) introduces the sleep for N seconds before starting each test.
* threadpool: move process priority setting into the apps (bench and cli)
This avoids changing the overall process priority on Windows for the apps
that use ggml/llama.cpp directy.
* threadpool: move all pause/resume logic into ggml
* threadpool: futher api cleanup and prep for future refactoring
All threadpool related functions and structs use ggml_threadpool prefix.
* threadpool: minor indent fixes
* threadpool: improve setprioty error message
* Update examples/llama-bench/llama-bench.cpp
Co-authored-by: slaren <slarengh@gmail.com>
* threadpool: fix indent in set_threadpool call
* use int32_t for n_thread type in public llama.cpp API
* threadpool: use _new and _free instead of _create and _release
* fix two more public APIs to use int32_t for n_threads
* build: set _GNU_SOURCE for Adroid
---------
Co-authored-by: Max Krasnyansky <quic_maxk@quicinc.com>
Co-authored-by: fmz <quic_fzaghlou@quic.com>
Co-authored-by: Max Krasnyansky <max.krasnyansky@gmail.com>
Co-authored-by: slaren <slarengh@gmail.com>
* common : Changed tuple to struct (TODO fix)
Use struct `llama_init_result` to replace the previous
std::tuple<struct llama_model *, struct llama_context *>
* delete llama_init_default_params()
* delete the extra whitespace
* llama : add inference support and model types for T5 and FLAN-T5 model families
* llama : add new API functions to support encoder-decoder models: llama_encode(), llama_model_has_encoder(), llama_model_decoder_start_token()
* common, llama-cli, llama-batched : add support for encoder-decoder models
* convert-hf : handle shared token embeddings tensors in T5Model
* convert-hf : add support for SentencePiece BPE tokenizer in T5Model (for Pile-T5 models)
* convert-hf : add MT5ForConditionalGeneration and UMT5ForConditionalGeneration to architectures supported by T5Model
* convert : add t5 tokenizer tests, use "slow" HF tokenizer for t5
---------
Co-authored-by: Stanisław Szymczyk <sszymczy@gmail.com>
Co-authored-by: Georgi Gerganov <ggerganov@gmail.com>
