llvm-project/lld/ELF/Thunks.cpp

//===- Thunks.cpp --------------------------------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===---------------------------------------------------------------------===//
//
// This file contains Thunk subclasses.
//
// A thunk is a small piece of code written after an input section
// which is used to jump between "incompatible" functions
// such as MIPS PIC and non-PIC or ARM non-Thumb and Thumb functions.
//
// If a jump target is too far and its address doesn't fit to a
// short jump instruction, we need to create a thunk too, but we
// haven't supported it yet.
//
// i386 and x86-64 don't need thunks.
//
//===---------------------------------------------------------------------===//

#include "Thunks.h"
#include "Config.h"
#include "InputFiles.h"
#include "InputSection.h"
#include "OutputSections.h"
#include "Symbols.h"
#include "SyntheticSections.h"
#include "Target.h"
#include "lld/Common/CommonLinkerContext.h"
#include "llvm/BinaryFormat/ELF.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/MathExtras.h"
#include <cstdint>
#include <cstring>

using namespace llvm;
using namespace llvm::object;
using namespace llvm::ELF;
using namespace lld;
using namespace lld::elf;

namespace {

// AArch64 long range Thunks
class AArch64ABSLongThunk final : public Thunk {
public:
  AArch64ABSLongThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {}
  uint32_t size() override { return 16; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class AArch64ADRPThunk final : public Thunk {
public:
  AArch64ADRPThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {}
  uint32_t size() override { return 12; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// Base class for ARM thunks.
//
// An ARM thunk may be either short or long. A short thunk is simply a branch
// (B) instruction, and it may be used to call ARM functions when the distance
// from the thunk to the target is less than 32MB. Long thunks can branch to any
// virtual address and can switch between ARM and Thumb, and they are
// implemented in the derived classes. This class tries to create a short thunk
// if the target is in range, otherwise it creates a long thunk.
class ARMThunk : public Thunk {
public:
  ARMThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {}

  bool getMayUseShortThunk();
  uint32_t size() override { return getMayUseShortThunk() ? 4 : sizeLong(); }
  void writeTo(uint8_t *buf) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;

  // Returns the size of a long thunk.
  virtual uint32_t sizeLong() = 0;

  // Writes a long thunk to Buf.
  virtual void writeLong(uint8_t *buf) = 0;

private:
  // This field tracks whether all previously considered layouts would allow
  // this thunk to be short. If we have ever needed a long thunk, we always
  // create a long thunk, even if the thunk may be short given the current
  // distance to the target. We do this because transitioning from long to short
  // can create layout oscillations in certain corner cases which would prevent
  // the layout from converging.
  bool mayUseShortThunk = true;
};

// Base class for Thumb-2 thunks.
//
// This class is similar to ARMThunk, but it uses the Thumb-2 B.W instruction
// which has a range of 16MB.
class ThumbThunk : public Thunk {
public:
  ThumbThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {
    alignment = 2;
  }

  bool getMayUseShortThunk();
  uint32_t size() override { return getMayUseShortThunk() ? 4 : sizeLong(); }
  void writeTo(uint8_t *buf) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;

  // Returns the size of a long thunk.
  virtual uint32_t sizeLong() = 0;

  // Writes a long thunk to Buf.
  virtual void writeLong(uint8_t *buf) = 0;

private:
  // See comment in ARMThunk above.
  bool mayUseShortThunk = true;
};

// Specific ARM Thunk implementations. The naming convention is:
// Source State, TargetState, Target Requirement, ABS or PI, Range
class ARMV7ABSLongThunk final : public ARMThunk {
public:
  ARMV7ABSLongThunk(Symbol &dest, int64_t addend) : ARMThunk(dest, addend) {}

  uint32_t sizeLong() override { return 12; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ARMV7PILongThunk final : public ARMThunk {
public:
  ARMV7PILongThunk(Symbol &dest, int64_t addend) : ARMThunk(dest, addend) {}

  uint32_t sizeLong() override { return 16; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ThumbV7ABSLongThunk final : public ThumbThunk {
public:
  ThumbV7ABSLongThunk(Symbol &dest, int64_t addend)
      : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 10; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ThumbV7PILongThunk final : public ThumbThunk {
public:
  ThumbV7PILongThunk(Symbol &dest, int64_t addend) : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 12; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// Implementations of Thunks for Arm v6-M. Only Thumb instructions are permitted
class ThumbV6MABSLongThunk final : public ThumbThunk {
public:
  ThumbV6MABSLongThunk(Symbol &dest, int64_t addend)
      : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 12; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ThumbV6MPILongThunk final : public ThumbThunk {
public:
  ThumbV6MPILongThunk(Symbol &dest, int64_t addend)
      : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 16; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// Architectures v4, v5 and v6 do not support the movt/movw instructions. v5 and
// v6 support BLX to which BL instructions can be rewritten inline. There are no
// Thumb entrypoints for v5 and v6 as there is no Thumb branch instruction on
// these architecture that can result in a thunk.

// LDR on v5 and v6 can switch processor state, so for v5 and v6,
// ARMV5LongLdrPcThunk can be used for both Arm->Arm and Arm->Thumb calls. v4
// can also use this thunk, but only for Arm->Arm calls.
class ARMV5LongLdrPcThunk final : public ARMThunk {
public:
  ARMV5LongLdrPcThunk(Symbol &dest, int64_t addend) : ARMThunk(dest, addend) {}

  uint32_t sizeLong() override { return 8; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ARMV4PILongThunk final : public ARMThunk {
public:
  ARMV4PILongThunk(Symbol &dest, int64_t addend) : ARMThunk(dest, addend) {}

  uint32_t sizeLong() override { return 16; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// Implementations of Thunks for v4. BLX is not supported, and loads
// will not invoke Arm/Thumb state changes.
class ARMV4ABSLongBXThunk final : public ARMThunk {
public:
  ARMV4ABSLongBXThunk(Symbol &dest, int64_t addend) : ARMThunk(dest, addend) {}

  uint32_t sizeLong() override { return 12; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ThumbV4ABSLongBXThunk final : public ThumbThunk {
public:
  ThumbV4ABSLongBXThunk(Symbol &dest, int64_t addend)
      : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 12; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

class ThumbV4ABSLongThunk final : public ThumbThunk {
public:
  ThumbV4ABSLongThunk(Symbol &dest, int64_t addend)
      : ThumbThunk(dest, addend) {}

  uint32_t sizeLong() override { return 16; }
  void writeLong(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// MIPS LA25 thunk
class MipsThunk final : public Thunk {
public:
  MipsThunk(Symbol &dest) : Thunk(dest, 0) {}

  uint32_t size() override { return 16; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  InputSection *getTargetInputSection() const override;
};

// microMIPS R2-R5 LA25 thunk
class MicroMipsThunk final : public Thunk {
public:
  MicroMipsThunk(Symbol &dest) : Thunk(dest, 0) {}

  uint32_t size() override { return 14; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  InputSection *getTargetInputSection() const override;
};

// microMIPS R6 LA25 thunk
class MicroMipsR6Thunk final : public Thunk {
public:
  MicroMipsR6Thunk(Symbol &dest) : Thunk(dest, 0) {}

  uint32_t size() override { return 12; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  InputSection *getTargetInputSection() const override;
};

class PPC32PltCallStub final : public Thunk {
public:
  // For R_PPC_PLTREL24, Thunk::addend records the addend which will be used to
  // decide the offsets in the call stub.
  PPC32PltCallStub(const InputSection &isec, const Relocation &rel,
                   Symbol &dest)
      : Thunk(dest, rel.addend), file(isec.file) {}
  uint32_t size() override { return 16; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec, const Relocation &rel) const override;

private:
  // Records the call site of the call stub.
  const InputFile *file;
};

class PPC32LongThunk final : public Thunk {
public:
  PPC32LongThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {}
  uint32_t size() override { return config->isPic ? 32 : 16; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
};

// PPC64 Plt call stubs.
// Any call site that needs to call through a plt entry needs a call stub in
// the .text section. The call stub is responsible for:
// 1) Saving the toc-pointer to the stack.
// 2) Loading the target functions address from the procedure linkage table into
//    r12 for use by the target functions global entry point, and into the count
//    register.
// 3) Transferring control to the target function through an indirect branch.
class PPC64PltCallStub final : public Thunk {
public:
  PPC64PltCallStub(Symbol &dest) : Thunk(dest, 0) {}
  uint32_t size() override { return 20; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;
};

// PPC64 R2 Save Stub
// When the caller requires a valid R2 TOC pointer but the callee does not
// require a TOC pointer and the callee cannot guarantee that it doesn't
// clobber R2 then we need to save R2. This stub:
// 1) Saves the TOC pointer to the stack.
// 2) Tail calls the callee.
class PPC64R2SaveStub final : public Thunk {
public:
  PPC64R2SaveStub(Symbol &dest, int64_t addend) : Thunk(dest, addend) {
    alignment = 16;
  }

  // To prevent oscillations in layout when moving from short to long thunks
  // we make sure that once a thunk has been set to long it cannot go back.
  bool getMayUseShortThunk() {
    if (!mayUseShortThunk)
      return false;
    if (!isInt<26>(computeOffset())) {
      mayUseShortThunk = false;
      return false;
    }
    return true;
  }
  uint32_t size() override { return getMayUseShortThunk() ? 8 : 32; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;

private:
  // Transitioning from long to short can create layout oscillations in
  // certain corner cases which would prevent the layout from converging.
  // This is similar to the handling for ARMThunk.
  bool mayUseShortThunk = true;
  int64_t computeOffset() const {
    return destination.getVA() - (getThunkTargetSym()->getVA() + 4);
  }
};

// PPC64 R12 Setup Stub
// When a caller that does not maintain a toc-pointer performs a local call to
// a callee which requires a toc-pointer then we need this stub to place the
// callee's global entry point into r12 without a save of R2.
class PPC64R12SetupStub final : public Thunk {
public:
  PPC64R12SetupStub(Symbol &dest) : Thunk(dest, 0) { alignment = 16; }
  uint32_t size() override { return 32; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;
};

// PPC64 PC-relative PLT Stub
// When a caller that does not maintain a toc-pointer performs an extern call
// then this stub is needed for:
// 1) Loading the target functions address from the procedure linkage table into
//    r12 for use by the target functions global entry point, and into the count
//    register with pc-relative instructions.
// 2) Transferring control to the target function through an indirect branch.
class PPC64PCRelPLTStub final : public Thunk {
public:
  PPC64PCRelPLTStub(Symbol &dest) : Thunk(dest, 0) { alignment = 16; }
  uint32_t size() override { return 32; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;
};

// A bl instruction uses a signed 24 bit offset, with an implicit 4 byte
// alignment. This gives a possible 26 bits of 'reach'. If the call offset is
// larger than that we need to emit a long-branch thunk. The target address
// of the callee is stored in a table to be accessed TOC-relative. Since the
// call must be local (a non-local call will have a PltCallStub instead) the
// table stores the address of the callee's local entry point. For
// position-independent code a corresponding relative dynamic relocation is
// used.
class PPC64LongBranchThunk : public Thunk {
public:
  uint32_t size() override { return 32; }
  void writeTo(uint8_t *buf) override;
  void addSymbols(ThunkSection &isec) override;
  bool isCompatibleWith(const InputSection &isec,
                        const Relocation &rel) const override;

protected:
  PPC64LongBranchThunk(Symbol &dest, int64_t addend) : Thunk(dest, addend) {}
};

class PPC64PILongBranchThunk final : public PPC64LongBranchThunk {
public:
  PPC64PILongBranchThunk(Symbol &dest, int64_t addend)
      : PPC64LongBranchThunk(dest, addend) {
    assert(!dest.isPreemptible);
    if (std::optional<uint32_t> index =
            in.ppc64LongBranchTarget->addEntry(&dest, addend)) {
      mainPart->relaDyn->addRelativeReloc(
          target->relativeRel, *in.ppc64LongBranchTarget, *index * UINT64_C(8),
          dest, addend + getPPC64GlobalEntryToLocalEntryOffset(dest.stOther),
          target->symbolicRel, R_ABS);
    }
  }
};

class PPC64PDLongBranchThunk final : public PPC64LongBranchThunk {
public:
  PPC64PDLongBranchThunk(Symbol &dest, int64_t addend)
      : PPC64LongBranchThunk(dest, addend) {
    in.ppc64LongBranchTarget->addEntry(&dest, addend);
  }
};

} // end anonymous namespace

Defined *Thunk::addSymbol(StringRef name, uint8_t type, uint64_t value,
                          InputSectionBase &section) {
  Defined *d = addSyntheticLocal(name, type, value, /*size=*/0, section);
  syms.push_back(d);
  return d;
}

void Thunk::setOffset(uint64_t newOffset) {
  for (Defined *d : syms)
    d->value = d->value - offset + newOffset;
  offset = newOffset;
}

// AArch64 long range Thunks

static uint64_t getAArch64ThunkDestVA(const Symbol &s, int64_t a) {
  uint64_t v = s.isInPlt() ? s.getPltVA() : s.getVA(a);
  return v;
}

void AArch64ABSLongThunk::writeTo(uint8_t *buf) {
  const uint8_t data[] = {
    0x50, 0x00, 0x00, 0x58, //     ldr x16, L0
    0x00, 0x02, 0x1f, 0xd6, //     br  x16
    0x00, 0x00, 0x00, 0x00, // L0: .xword S
    0x00, 0x00, 0x00, 0x00,
  };
  uint64_t s = getAArch64ThunkDestVA(destination, addend);
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 8, R_AARCH64_ABS64, s);
}

void AArch64ABSLongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__AArch64AbsLongThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$x", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 8, isec);
}

// This Thunk has a maximum range of 4Gb, this is sufficient for all programs
// using the small code model, including pc-relative ones. At time of writing
// clang and gcc do not support the large code model for position independent
// code so it is safe to use this for position independent thunks without
// worrying about the destination being more than 4Gb away.
void AArch64ADRPThunk::writeTo(uint8_t *buf) {
  const uint8_t data[] = {
      0x10, 0x00, 0x00, 0x90, // adrp x16, Dest R_AARCH64_ADR_PREL_PG_HI21(Dest)
      0x10, 0x02, 0x00, 0x91, // add  x16, x16, R_AARCH64_ADD_ABS_LO12_NC(Dest)
      0x00, 0x02, 0x1f, 0xd6, // br   x16
  };
  uint64_t s = getAArch64ThunkDestVA(destination, addend);
  uint64_t p = getThunkTargetSym()->getVA();
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_AARCH64_ADR_PREL_PG_HI21,
                        getAArch64Page(s) - getAArch64Page(p));
  target->relocateNoSym(buf + 4, R_AARCH64_ADD_ABS_LO12_NC, s);
}

void AArch64ADRPThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__AArch64ADRPThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$x", STT_NOTYPE, 0, isec);
}

// ARM Target Thunks
static uint64_t getARMThunkDestVA(const Symbol &s) {
  uint64_t v = s.isInPlt() ? s.getPltVA() : s.getVA();
  return SignExtend64<32>(v);
}

// This function returns true if the target is not Thumb and is within 2^26, and
// it has not previously returned false (see comment for mayUseShortThunk).
bool ARMThunk::getMayUseShortThunk() {
  if (!mayUseShortThunk)
    return false;
  uint64_t s = getARMThunkDestVA(destination);
  if (s & 1) {
    mayUseShortThunk = false;
    return false;
  }
  uint64_t p = getThunkTargetSym()->getVA();
  int64_t offset = s - p - 8;
  mayUseShortThunk = llvm::isInt<26>(offset);
  return mayUseShortThunk;
}

void ARMThunk::writeTo(uint8_t *buf) {
  if (!getMayUseShortThunk()) {
    writeLong(buf);
    return;
  }

  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA();
  int64_t offset = s - p - 8;
  const uint8_t data[] = {
    0x00, 0x00, 0x00, 0xea, // b S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_JUMP24, offset);
}

bool ARMThunk::isCompatibleWith(const InputSection &isec,
                                const Relocation &rel) const {
  // v4T does not have BLX, so also deny R_ARM_THM_CALL
  if (!config->armHasBlx && rel.type == R_ARM_THM_CALL)
    return false;

  // Thumb branch relocations can't use BLX
  return rel.type != R_ARM_THM_JUMP19 && rel.type != R_ARM_THM_JUMP24;
}

// This function returns true if:
// the target is Thumb
// && is within branch range
// && this function has not previously returned false
//    (see comment for mayUseShortThunk)
// && the arch supports Thumb branch range extension.
bool ThumbThunk::getMayUseShortThunk() {
  if (!mayUseShortThunk || !config->armJ1J2BranchEncoding)
    return false;
  uint64_t s = getARMThunkDestVA(destination);
  if ((s & 1) == 0) {
    mayUseShortThunk = false;
    return false;
  }
  uint64_t p = getThunkTargetSym()->getVA() & ~1;
  int64_t offset = s - p - 4;
  mayUseShortThunk = llvm::isInt<25>(offset);
  return mayUseShortThunk;
}

void ThumbThunk::writeTo(uint8_t *buf) {
  if (!getMayUseShortThunk()) {
    writeLong(buf);
    return;
  }

  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA();
  int64_t offset = s - p - 4;
  const uint8_t data[] = {
      0x00, 0xf0, 0x00, 0xb0, // b.w S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_THM_JUMP24, offset);
}

bool ThumbThunk::isCompatibleWith(const InputSection &isec,
                                  const Relocation &rel) const {
  // v4T does not have BLX, so also deny R_ARM_CALL
  if (!config->armHasBlx && rel.type == R_ARM_CALL)
    return false;

  // ARM branch relocations can't use BLX
  return rel.type != R_ARM_JUMP24 && rel.type != R_ARM_PC24 && rel.type != R_ARM_PLT32;
}

void ARMV7ABSLongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x00, 0xc0, 0x00, 0xe3, // movw         ip,:lower16:S
      0x00, 0xc0, 0x40, 0xe3, // movt         ip,:upper16:S
      0x1c, 0xff, 0x2f, 0xe1, // bx   ip
  };
  uint64_t s = getARMThunkDestVA(destination);
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_MOVW_ABS_NC, s);
  target->relocateNoSym(buf + 4, R_ARM_MOVT_ABS, s);
}

void ARMV7ABSLongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ARMv7ABSLongThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$a", STT_NOTYPE, 0, isec);
}

void ThumbV7ABSLongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x40, 0xf2, 0x00, 0x0c, // movw         ip, :lower16:S
      0xc0, 0xf2, 0x00, 0x0c, // movt         ip, :upper16:S
      0x60, 0x47,             // bx   ip
  };
  uint64_t s = getARMThunkDestVA(destination);
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_THM_MOVW_ABS_NC, s);
  target->relocateNoSym(buf + 4, R_ARM_THM_MOVT_ABS, s);
}

void ThumbV7ABSLongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__Thumbv7ABSLongThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
}

void ARMV7PILongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0xf0, 0xcf, 0x0f, 0xe3, // P:  movw ip,:lower16:S - (P + (L1-P) + 8)
      0x00, 0xc0, 0x40, 0xe3, //     movt ip,:upper16:S - (P + (L1-P) + 8)
      0x0f, 0xc0, 0x8c, 0xe0, // L1: add  ip, ip, pc
      0x1c, 0xff, 0x2f, 0xe1, //     bx   ip
  };
  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA();
  int64_t offset = s - p - 16;
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_MOVW_PREL_NC, offset);
  target->relocateNoSym(buf + 4, R_ARM_MOVT_PREL, offset);
}

void ARMV7PILongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ARMV7PILongThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$a", STT_NOTYPE, 0, isec);
}

void ThumbV7PILongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x4f, 0xf6, 0xf4, 0x7c, // P:  movw ip,:lower16:S - (P + (L1-P) + 4)
      0xc0, 0xf2, 0x00, 0x0c, //     movt ip,:upper16:S - (P + (L1-P) + 4)
      0xfc, 0x44,             // L1: add  ip, pc
      0x60, 0x47,             //     bx   ip
  };
  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA() & ~0x1;
  int64_t offset = s - p - 12;
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf, R_ARM_THM_MOVW_PREL_NC, offset);
  target->relocateNoSym(buf + 4, R_ARM_THM_MOVT_PREL, offset);
}

void ThumbV7PILongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ThumbV7PILongThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
}

void ThumbV6MABSLongThunk::writeLong(uint8_t *buf) {
  // Most Thumb instructions cannot access the high registers r8 - r15. As the
  // only register we can corrupt is r12 we must instead spill a low register
  // to the stack to use as a scratch register. We push r1 even though we
  // don't need to get some space to use for the return address.
  const uint8_t data[] = {
      0x03, 0xb4,            // push {r0, r1} ; Obtain scratch registers
      0x01, 0x48,            // ldr r0, [pc, #4] ; L1
      0x01, 0x90,            // str r0, [sp, #4] ; SP + 4 = S
      0x01, 0xbd,            // pop {r0, pc} ; restore r0 and branch to dest
      0x00, 0x00, 0x00, 0x00 // L1: .word S
  };
  uint64_t s = getARMThunkDestVA(destination);
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 8, R_ARM_ABS32, s);
}

void ThumbV6MABSLongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__Thumbv6MABSLongThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 8, isec);
}

void ThumbV6MPILongThunk::writeLong(uint8_t *buf) {
  // Most Thumb instructions cannot access the high registers r8 - r15. As the
  // only register we can corrupt is ip (r12) we must instead spill a low
  // register to the stack to use as a scratch register.
  const uint8_t data[] = {
      0x01, 0xb4,             // P:  push {r0}        ; Obtain scratch register
      0x02, 0x48,             //     ldr r0, [pc, #8] ; L2
      0x84, 0x46,             //     mov ip, r0       ; high to low register
      0x01, 0xbc,             //     pop {r0}         ; restore scratch register
      0xe7, 0x44,             // L1: add pc, ip       ; transfer control
      0xc0, 0x46,             //     nop              ; pad to 4-byte boundary
      0x00, 0x00, 0x00, 0x00, // L2: .word S - (P + (L1 - P) + 4)
  };
  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA() & ~0x1;
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 12, R_ARM_REL32, s - p - 12);
}

void ThumbV6MPILongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__Thumbv6MPILongThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 12, isec);
}

void ARMV5LongLdrPcThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x04, 0xf0, 0x1f, 0xe5, // ldr pc, [pc,#-4] ; L1
      0x00, 0x00, 0x00, 0x00, // L1: .word S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 4, R_ARM_ABS32, getARMThunkDestVA(destination));
}

void ARMV5LongLdrPcThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ARMv5LongLdrPcThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$a", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 4, isec);
}

void ARMV4ABSLongBXThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x00, 0xc0, 0x9f, 0xe5, // ldr r12, [pc] ; L1
      0x1c, 0xff, 0x2f, 0xe1, // bx r12
      0x00, 0x00, 0x00, 0x00, // L1: .word S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 8, R_ARM_ABS32, getARMThunkDestVA(destination));
}

void ARMV4ABSLongBXThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ARMv4ABSLongBXThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$a", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 8, isec);
}

void ThumbV4ABSLongBXThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x78, 0x47,             // bx pc
      0xfd, 0xe7,             // b #-6 ; Arm recommended sequence to follow bx pc
      0x04, 0xf0, 0x1f, 0xe5, // ldr pc, [pc, #-4] ; L1
      0x00, 0x00, 0x00, 0x00, // L1: .word S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 8, R_ARM_ABS32, getARMThunkDestVA(destination));
}

void ThumbV4ABSLongBXThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__Thumbv4ABSLongBXThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
  addSymbol("$a", STT_NOTYPE, 4, isec);
  addSymbol("$d", STT_NOTYPE, 8, isec);
}

void ThumbV4ABSLongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x78, 0x47,             // bx pc
      0xfd, 0xe7,             // b #-6 ; Arm recommended sequence to follow bx pc
      0x00, 0xc0, 0x9f, 0xe5, // ldr r12, [pc] ; L1
      0x1c, 0xff, 0x2f, 0xe1, // bx r12
      0x00, 0x00, 0x00, 0x00, // L1: .word S
  };
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 12, R_ARM_ABS32, getARMThunkDestVA(destination));
}

void ThumbV4ABSLongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__Thumbv4ABSLongThunk_" + destination.getName()),
            STT_FUNC, 1, isec);
  addSymbol("$t", STT_NOTYPE, 0, isec);
  addSymbol("$a", STT_NOTYPE, 4, isec);
  addSymbol("$d", STT_NOTYPE, 12, isec);
}

void ARMV4PILongThunk::writeLong(uint8_t *buf) {
  const uint8_t data[] = {
      0x04, 0xc0, 0x9f, 0xe5, // P:  ldr ip, [pc,#4] ; L2
      0x0c, 0xc0, 0x8f, 0xe0, // L1: add ip, pc, ip
      0x1c, 0xff, 0x2f, 0xe1, //     bx ip
      0x00, 0x00, 0x00, 0x00, // L2: .word S - (P + (L1 - P) + 8)
  };
  uint64_t s = getARMThunkDestVA(destination);
  uint64_t p = getThunkTargetSym()->getVA() & ~0x1;
  memcpy(buf, data, sizeof(data));
  target->relocateNoSym(buf + 12, R_ARM_REL32, s - p - 12);
}

void ARMV4PILongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__ARMv4PILongThunk_" + destination.getName()),
            STT_FUNC, 0, isec);
  addSymbol("$a", STT_NOTYPE, 0, isec);
  addSymbol("$d", STT_NOTYPE, 12, isec);
}

// Write MIPS LA25 thunk code to call PIC function from the non-PIC one.
void MipsThunk::writeTo(uint8_t *buf) {
  uint64_t s = destination.getVA();
  write32(buf, 0x3c190000); // lui   $25, %hi(func)
  write32(buf + 4, 0x08000000 | (s >> 2)); // j     func
  write32(buf + 8, 0x27390000); // addiu $25, $25, %lo(func)
  write32(buf + 12, 0x00000000); // nop
  target->relocateNoSym(buf, R_MIPS_HI16, s);
  target->relocateNoSym(buf + 8, R_MIPS_LO16, s);
}

void MipsThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__LA25Thunk_" + destination.getName()), STT_FUNC, 0,
            isec);
}

InputSection *MipsThunk::getTargetInputSection() const {
  auto &dr = cast<Defined>(destination);
  return dyn_cast<InputSection>(dr.section);
}

// Write microMIPS R2-R5 LA25 thunk code
// to call PIC function from the non-PIC one.
void MicroMipsThunk::writeTo(uint8_t *buf) {
  uint64_t s = destination.getVA();
  write16(buf, 0x41b9);       // lui   $25, %hi(func)
  write16(buf + 4, 0xd400);   // j     func
  write16(buf + 8, 0x3339);   // addiu $25, $25, %lo(func)
  write16(buf + 12, 0x0c00);  // nop
  target->relocateNoSym(buf, R_MICROMIPS_HI16, s);
  target->relocateNoSym(buf + 4, R_MICROMIPS_26_S1, s);
  target->relocateNoSym(buf + 8, R_MICROMIPS_LO16, s);
}

void MicroMipsThunk::addSymbols(ThunkSection &isec) {
  Defined *d =
      addSymbol(saver().save("__microLA25Thunk_" + destination.getName()),
                STT_FUNC, 0, isec);
  d->stOther |= STO_MIPS_MICROMIPS;
}

InputSection *MicroMipsThunk::getTargetInputSection() const {
  auto &dr = cast<Defined>(destination);
  return dyn_cast<InputSection>(dr.section);
}

// Write microMIPS R6 LA25 thunk code
// to call PIC function from the non-PIC one.
void MicroMipsR6Thunk::writeTo(uint8_t *buf) {
  uint64_t s = destination.getVA();
  uint64_t p = getThunkTargetSym()->getVA();
  write16(buf, 0x1320);       // lui   $25, %hi(func)
  write16(buf + 4, 0x3339);   // addiu $25, $25, %lo(func)
  write16(buf + 8, 0x9400);   // bc    func
  target->relocateNoSym(buf, R_MICROMIPS_HI16, s);
  target->relocateNoSym(buf + 4, R_MICROMIPS_LO16, s);
  target->relocateNoSym(buf + 8, R_MICROMIPS_PC26_S1, s - p - 12);
}

void MicroMipsR6Thunk::addSymbols(ThunkSection &isec) {
  Defined *d =
      addSymbol(saver().save("__microLA25Thunk_" + destination.getName()),
                STT_FUNC, 0, isec);
  d->stOther |= STO_MIPS_MICROMIPS;
}

InputSection *MicroMipsR6Thunk::getTargetInputSection() const {
  auto &dr = cast<Defined>(destination);
  return dyn_cast<InputSection>(dr.section);
}

void elf::writePPC32PltCallStub(uint8_t *buf, uint64_t gotPltVA,
                                const InputFile *file, int64_t addend) {
  if (!config->isPic) {
    write32(buf + 0, 0x3d600000 | (gotPltVA + 0x8000) >> 16); // lis r11,ha
    write32(buf + 4, 0x816b0000 | (uint16_t)gotPltVA);        // lwz r11,l(r11)
    write32(buf + 8, 0x7d6903a6);                             // mtctr r11
    write32(buf + 12, 0x4e800420);                            // bctr
    return;
  }
  uint32_t offset;
  if (addend >= 0x8000) {
    // The stub loads an address relative to r30 (.got2+Addend). Addend is
    // almost always 0x8000. The address of .got2 is different in another object
    // file, so a stub cannot be shared.
    offset = gotPltVA -
             (in.ppc32Got2->getParent()->getVA() +
              (file->ppc32Got2 ? file->ppc32Got2->outSecOff : 0) + addend);
  } else {
    // The stub loads an address relative to _GLOBAL_OFFSET_TABLE_ (which is
    // currently the address of .got).
    offset = gotPltVA - in.got->getVA();
  }
  uint16_t ha = (offset + 0x8000) >> 16, l = (uint16_t)offset;
  if (ha == 0) {
    write32(buf + 0, 0x817e0000 | l); // lwz r11,l(r30)
    write32(buf + 4, 0x7d6903a6);     // mtctr r11
    write32(buf + 8, 0x4e800420);     // bctr
    write32(buf + 12, 0x60000000);    // nop
  } else {
    write32(buf + 0, 0x3d7e0000 | ha); // addis r11,r30,ha
    write32(buf + 4, 0x816b0000 | l);  // lwz r11,l(r11)
    write32(buf + 8, 0x7d6903a6);      // mtctr r11
    write32(buf + 12, 0x4e800420);     // bctr
  }
}

void PPC32PltCallStub::writeTo(uint8_t *buf) {
  writePPC32PltCallStub(buf, destination.getGotPltVA(), file, addend);
}

void PPC32PltCallStub::addSymbols(ThunkSection &isec) {
  std::string buf;
  raw_string_ostream os(buf);
  os << format_hex_no_prefix(addend, 8);
  if (!config->isPic)
    os << ".plt_call32.";
  else if (addend >= 0x8000)
    os << ".got2.plt_pic32.";
  else
    os << ".plt_pic32.";
  os << destination.getName();
  addSymbol(saver().save(os.str()), STT_FUNC, 0, isec);
}

bool PPC32PltCallStub::isCompatibleWith(const InputSection &isec,
                                        const Relocation &rel) const {
  return !config->isPic || (isec.file == file && rel.addend == addend);
}

void PPC32LongThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__LongThunk_" + destination.getName()), STT_FUNC, 0,
            isec);
}

void PPC32LongThunk::writeTo(uint8_t *buf) {
  auto ha = [](uint32_t v) -> uint16_t { return (v + 0x8000) >> 16; };
  auto lo = [](uint32_t v) -> uint16_t { return v; };
  uint32_t d = destination.getVA(addend);
  if (config->isPic) {
    uint32_t off = d - (getThunkTargetSym()->getVA() + 8);
    write32(buf + 0, 0x7c0802a6);            // mflr r12,0
    write32(buf + 4, 0x429f0005);            // bcl r20,r31,.+4
    write32(buf + 8, 0x7d8802a6);            // mtctr r12
    write32(buf + 12, 0x3d8c0000 | ha(off)); // addis r12,r12,off@ha
    write32(buf + 16, 0x398c0000 | lo(off)); // addi r12,r12,off@l
    write32(buf + 20, 0x7c0803a6);           // mtlr r0
    buf += 24;
  } else {
    write32(buf + 0, 0x3d800000 | ha(d));    // lis r12,d@ha
    write32(buf + 4, 0x398c0000 | lo(d));    // addi r12,r12,d@l
    buf += 8;
  }
  write32(buf + 0, 0x7d8903a6);              // mtctr r12
  write32(buf + 4, 0x4e800420);              // bctr
}

void elf::writePPC64LoadAndBranch(uint8_t *buf, int64_t offset) {
  uint16_t offHa = (offset + 0x8000) >> 16;
  uint16_t offLo = offset & 0xffff;

  write32(buf + 0, 0x3d820000 | offHa); // addis r12, r2, OffHa
  write32(buf + 4, 0xe98c0000 | offLo); // ld    r12, OffLo(r12)
  write32(buf + 8, 0x7d8903a6);         // mtctr r12
  write32(buf + 12, 0x4e800420);        // bctr
}

void PPC64PltCallStub::writeTo(uint8_t *buf) {
  int64_t offset = destination.getGotPltVA() - getPPC64TocBase();
  // Save the TOC pointer to the save-slot reserved in the call frame.
  write32(buf + 0, 0xf8410018); // std     r2,24(r1)
  writePPC64LoadAndBranch(buf + 4, offset);
}

void PPC64PltCallStub::addSymbols(ThunkSection &isec) {
  Defined *s = addSymbol(saver().save("__plt_" + destination.getName()),
                         STT_FUNC, 0, isec);
  s->needsTocRestore = true;
  s->file = destination.file;
}

bool PPC64PltCallStub::isCompatibleWith(const InputSection &isec,
                                        const Relocation &rel) const {
  return rel.type == R_PPC64_REL24 || rel.type == R_PPC64_REL14;
}

void PPC64R2SaveStub::writeTo(uint8_t *buf) {
  const int64_t offset = computeOffset();
  write32(buf + 0, 0xf8410018); // std  r2,24(r1)
  // The branch offset needs to fit in 26 bits.
  if (getMayUseShortThunk()) {
    write32(buf + 4, 0x48000000 | (offset & 0x03fffffc)); // b    <offset>
  } else if (isInt<34>(offset)) {
    int nextInstOffset;
    uint64_t tocOffset = destination.getVA() - getPPC64TocBase();
    if (tocOffset >> 16 > 0) {
      const uint64_t addi = ADDI_R12_TO_R12_NO_DISP | (tocOffset & 0xffff);
      const uint64_t addis =
          ADDIS_R12_TO_R2_NO_DISP | ((tocOffset >> 16) & 0xffff);
      write32(buf + 4, addis); // addis r12, r2 , top of offset
      write32(buf + 8, addi);  // addi  r12, r12, bottom of offset
      nextInstOffset = 12;
    } else {
      const uint64_t addi = ADDI_R12_TO_R2_NO_DISP | (tocOffset & 0xffff);
      write32(buf + 4, addi); // addi r12, r2, offset
      nextInstOffset = 8;
    }
    write32(buf + nextInstOffset, MTCTR_R12); // mtctr r12
    write32(buf + nextInstOffset + 4, BCTR);  // bctr
  } else {
    in.ppc64LongBranchTarget->addEntry(&destination, addend);
    const int64_t offsetFromTOC =
        in.ppc64LongBranchTarget->getEntryVA(&destination, addend) -
        getPPC64TocBase();
    writePPC64LoadAndBranch(buf + 4, offsetFromTOC);
  }
}

void PPC64R2SaveStub::addSymbols(ThunkSection &isec) {
  Defined *s = addSymbol(saver().save("__toc_save_" + destination.getName()),
                         STT_FUNC, 0, isec);
  s->needsTocRestore = true;
}

bool PPC64R2SaveStub::isCompatibleWith(const InputSection &isec,
                                       const Relocation &rel) const {
  return rel.type == R_PPC64_REL24 || rel.type == R_PPC64_REL14;
}

void PPC64R12SetupStub::writeTo(uint8_t *buf) {
  int64_t offset = destination.getVA() - getThunkTargetSym()->getVA();
  if (!isInt<34>(offset))
    reportRangeError(buf, offset, 34, destination, "R12 setup stub offset");

  int nextInstOffset;
  if (!config->power10Stubs) {
    uint32_t off = destination.getVA(addend) - getThunkTargetSym()->getVA() - 8;
    write32(buf + 0, 0x7c0802a6);                      // mflr r12
    write32(buf + 4, 0x429f0005);                      // bcl 20,31,.+4
    write32(buf + 8, 0x7d6802a6);                      // mflr r11
    write32(buf + 12, 0x7d8803a6);                     // mtlr r12
    write32(buf + 16, 0x3d8b0000 | computeHiBits(off));// addis r12,r11,off@ha
    write32(buf + 20, 0x398c0000 | (off & 0xffff));    // addi r12,r12,off@l
    nextInstOffset = 24;
  } else {
    uint64_t paddi = PADDI_R12_NO_DISP | (((offset >> 16) & 0x3ffff) << 32) |
                     (offset & 0xffff);
    writePrefixedInstruction(buf + 0, paddi); // paddi r12, 0, func@pcrel, 1
    nextInstOffset = 8;
  }
  write32(buf + nextInstOffset, MTCTR_R12); // mtctr r12
  write32(buf + nextInstOffset + 4, BCTR);  // bctr
}

void PPC64R12SetupStub::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__gep_setup_" + destination.getName()), STT_FUNC, 0,
            isec);
}

bool PPC64R12SetupStub::isCompatibleWith(const InputSection &isec,
                                         const Relocation &rel) const {
  return rel.type == R_PPC64_REL24_NOTOC;
}

void PPC64PCRelPLTStub::writeTo(uint8_t *buf) {
  int nextInstOffset = 0;
  int64_t offset = destination.getGotPltVA() - getThunkTargetSym()->getVA();

  if (config->power10Stubs) {
    if (!isInt<34>(offset))
      reportRangeError(buf, offset, 34, destination,
                       "PC-relative PLT stub offset");
    const uint64_t pld = PLD_R12_NO_DISP | (((offset >> 16) & 0x3ffff) << 32) |
                   (offset & 0xffff);
    writePrefixedInstruction(buf + 0, pld); // pld r12, func@plt@pcrel
    nextInstOffset = 8;
  } else {
    uint32_t off = destination.getVA(addend) - getThunkTargetSym()->getVA() - 8;
    write32(buf + 0, 0x7c0802a6);            // mflr r12
    write32(buf + 4, 0x429f0005);            // bcl 20,31,.+4
    write32(buf + 8, 0x7d6802a6);            // mflr r11
    write32(buf + 12, 0x7d8803a6);           // mtlr r12
    write32(buf + 16, 0x3d8b0000 | computeHiBits(off)); // addis r12,r11,off@ha
    write32(buf + 20, 0x398c0000 | (off & 0xffff)); // addi r12,r12,off@l
    nextInstOffset = 24;
  }
  write32(buf + nextInstOffset, MTCTR_R12); // mtctr r12
  write32(buf + nextInstOffset + 4, BCTR);  // bctr
}

void PPC64PCRelPLTStub::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__plt_pcrel_" + destination.getName()), STT_FUNC, 0,
            isec);
}

bool PPC64PCRelPLTStub::isCompatibleWith(const InputSection &isec,
                                         const Relocation &rel) const {
  return rel.type == R_PPC64_REL24_NOTOC;
}

void PPC64LongBranchThunk::writeTo(uint8_t *buf) {
  int64_t offset = in.ppc64LongBranchTarget->getEntryVA(&destination, addend) -
                   getPPC64TocBase();
  writePPC64LoadAndBranch(buf, offset);
}

void PPC64LongBranchThunk::addSymbols(ThunkSection &isec) {
  addSymbol(saver().save("__long_branch_" + destination.getName()), STT_FUNC, 0,
            isec);
}

bool PPC64LongBranchThunk::isCompatibleWith(const InputSection &isec,
                                            const Relocation &rel) const {
  return rel.type == R_PPC64_REL24 || rel.type == R_PPC64_REL14;
}

Thunk::Thunk(Symbol &d, int64_t a) : destination(d), addend(a), offset(0) {}

Thunk::~Thunk() = default;

static Thunk *addThunkAArch64(RelType type, Symbol &s, int64_t a) {
  if (type != R_AARCH64_CALL26 && type != R_AARCH64_JUMP26 &&
      type != R_AARCH64_PLT32)
    fatal("unrecognized relocation type");
  if (config->picThunk)
    return make<AArch64ADRPThunk>(s, a);
  return make<AArch64ABSLongThunk>(s, a);
}

// Creates a thunk for long branches or Thumb-ARM interworking.
// Arm Architectures v4t does not support Thumb2 technology, and does not
// support BLX or LDR Arm/Thumb state switching. This means that
// - MOVT and MOVW instructions cannot be used.
// - We can't rewrite BL in place to BLX. We will need thunks.
//
// TODO: Support PIC interworking thunks for V4T.
// TODO: More efficient PIC non-interworking thunks for V4T.
// TODO: use B for short Thumb->Arm thunks instead of LDR (this doesn't work for
//       Arm->Thumb, as in Arm state no BX PC trick; it doesn't switch state).
static Thunk *addThunkArmv4(RelType reloc, Symbol &s, int64_t a) {
  bool thumb_target = s.getVA(a) & 1;

  switch (reloc) {
  case R_ARM_PC24:
  case R_ARM_PLT32:
  case R_ARM_JUMP24:
  case R_ARM_CALL:
    if (config->picThunk)
      // can be used for both Arm->Arm and Arm->Thumb
      return make<ARMV4PILongThunk>(s, a);
    if (thumb_target)
      return make<ARMV4ABSLongBXThunk>(s, a);
    return make<ARMV5LongLdrPcThunk>(s, a);
  case R_ARM_THM_CALL:
    if (config->picThunk && !thumb_target)
      fatal("PIC relocations across state change not supported for Armv4T");
    if (config->picThunk && thumb_target)
      return make<ThumbV6MPILongThunk>(s, a);
    if (thumb_target)
      return make<ThumbV4ABSLongThunk>(s, a);
    return make<ThumbV4ABSLongBXThunk>(s, a);
  }
  fatal("relocation " + toString(reloc) + " to " + toString(s) +
        " not supported for Armv4 or Armv4T target");
}

// Creates a thunk for Thumb-ARM interworking compatible with Armv5 and Armv6.
// Arm Architectures v5 and v6 do not support Thumb2 technology. This means that
// - MOVT and MOVW instructions cannot be used
// - Only Thumb relocation that can generate a Thunk is a BL, this can always
//   be transformed into a BLX
static Thunk *addThunkArmv5v6(RelType reloc, Symbol &s, int64_t a) {
  switch (reloc) {
  case R_ARM_PC24:
  case R_ARM_PLT32:
  case R_ARM_JUMP24:
  case R_ARM_CALL:
  case R_ARM_THM_CALL:
    if (config->picThunk)
      return make<ARMV4PILongThunk>(s, a);
    return make<ARMV5LongLdrPcThunk>(s, a);
  }
  fatal("relocation " + toString(reloc) + " to " + toString(s) +
        " not supported for Armv5 or Armv6 targets");
}

// Create a thunk for Thumb long branch on V6-M.
// Arm Architecture v6-M only supports Thumb instructions. This means
// - MOVT and MOVW instructions cannot be used.
// - Only a limited number of instructions can access registers r8 and above
// - No interworking support is needed (all Thumb).
static Thunk *addThunkV6M(RelType reloc, Symbol &s, int64_t a) {
  switch (reloc) {
  case R_ARM_THM_JUMP19:
  case R_ARM_THM_JUMP24:
  case R_ARM_THM_CALL:
    if (config->isPic)
      return make<ThumbV6MPILongThunk>(s, a);
    return make<ThumbV6MABSLongThunk>(s, a);
  }
  fatal("relocation " + toString(reloc) + " to " + toString(s) +
        " not supported for Armv6-M targets");
}

// Creates a thunk for Thumb-ARM interworking or branch range extension.
static Thunk *addThunkArm(RelType reloc, Symbol &s, int64_t a) {
  // Decide which Thunk is needed based on:
  // Available instruction set
  // - An Arm Thunk can only be used if Arm state is available.
  // - A Thumb Thunk can only be used if Thumb state is available.
  // - Can only use a Thunk if it uses instructions that the Target supports.
  // Relocation is branch or branch and link
  // - Branch instructions cannot change state, can only select Thunk that
  //   starts in the same state as the caller.
  // - Branch and link relocations can change state, can select Thunks from
  //   either Arm or Thumb.
  // Position independent Thunks if we require position independent code.

  // Handle architectures that have restrictions on the instructions that they
  // can use in Thunks. The flags below are set by reading the BuildAttributes
  // of the input objects. InputFiles.cpp contains the mapping from ARM
  // architecture to flag.
  if (!config->armHasMovtMovw) {
    if (config->armJ1J2BranchEncoding)
      return addThunkV6M(reloc, s, a);
    if (config->armHasBlx)
      return addThunkArmv5v6(reloc, s, a);
    return addThunkArmv4(reloc, s, a);
  }

  switch (reloc) {
  case R_ARM_PC24:
  case R_ARM_PLT32:
  case R_ARM_JUMP24:
  case R_ARM_CALL:
    if (config->picThunk)
      return make<ARMV7PILongThunk>(s, a);
    return make<ARMV7ABSLongThunk>(s, a);
  case R_ARM_THM_JUMP19:
  case R_ARM_THM_JUMP24:
  case R_ARM_THM_CALL:
    if (config->picThunk)
      return make<ThumbV7PILongThunk>(s, a);
    return make<ThumbV7ABSLongThunk>(s, a);
  }
  fatal("unrecognized relocation type");
}

static Thunk *addThunkMips(RelType type, Symbol &s) {
  if ((s.stOther & STO_MIPS_MICROMIPS) && isMipsR6())
    return make<MicroMipsR6Thunk>(s);
  if (s.stOther & STO_MIPS_MICROMIPS)
    return make<MicroMipsThunk>(s);
  return make<MipsThunk>(s);
}

static Thunk *addThunkPPC32(const InputSection &isec, const Relocation &rel,
                            Symbol &s) {
  assert((rel.type == R_PPC_LOCAL24PC || rel.type == R_PPC_REL24 ||
          rel.type == R_PPC_PLTREL24) &&
         "unexpected relocation type for thunk");
  if (s.isInPlt())
    return make<PPC32PltCallStub>(isec, rel, s);
  return make<PPC32LongThunk>(s, rel.addend);
}

static Thunk *addThunkPPC64(RelType type, Symbol &s, int64_t a) {
  assert((type == R_PPC64_REL14 || type == R_PPC64_REL24 ||
          type == R_PPC64_REL24_NOTOC) &&
         "unexpected relocation type for thunk");
  if (s.isInPlt())
    return type == R_PPC64_REL24_NOTOC ? (Thunk *)make<PPC64PCRelPLTStub>(s)
                                       : (Thunk *)make<PPC64PltCallStub>(s);

  // This check looks at the st_other bits of the callee. If the value is 1
  // then the callee clobbers the TOC and we need an R2 save stub when RelType
  // is R_PPC64_REL14 or R_PPC64_REL24.
  if ((type == R_PPC64_REL14 || type == R_PPC64_REL24) && (s.stOther >> 5) == 1)
    return make<PPC64R2SaveStub>(s, a);

  if (type == R_PPC64_REL24_NOTOC)
    return make<PPC64R12SetupStub>(s);

  if (config->picThunk)
    return make<PPC64PILongBranchThunk>(s, a);

  return make<PPC64PDLongBranchThunk>(s, a);
}

Thunk *elf::addThunk(const InputSection &isec, Relocation &rel) {
  Symbol &s = *rel.sym;
  int64_t a = rel.addend;

  if (config->emachine == EM_AARCH64)
    return addThunkAArch64(rel.type, s, a);

  if (config->emachine == EM_ARM)
    return addThunkArm(rel.type, s, a);

  if (config->emachine == EM_MIPS)
    return addThunkMips(rel.type, s);

  if (config->emachine == EM_PPC)
    return addThunkPPC32(isec, rel, s);

  if (config->emachine == EM_PPC64)
    return addThunkPPC64(rel.type, s, a);

  llvm_unreachable("add Thunk only supported for ARM, Mips and PowerPC");
}