[BOLT] Support instrumentation hook via DT_FINI_ARRAY (#67348)

BOLT currently hooks its its instrumentation finalization function via
`DT_FINI`. However, this method of calling finalization routines is not
supported anymore on newer ABIs like RISC-V. `DT_FINI_ARRAY` is
preferred there.

This patch adds support for hooking into `DT_FINI_ARRAY` instead if the
binary does not have a `DT_FINI` entry. If it does, `DT_FINI` takes
precedence so this patch should not change how the currently supported
instrumentation targets behave.

`DT_FINI_ARRAY` points to an array in memory of `DT_FINI_ARRAYSZ` bytes.
It consists of pointer-length entries that contain the addresses of
finalization functions. However, the addresses are only filled-in by the
dynamic linker at load time using relative relocations. This makes
hooking via `DT_FINI_ARRAY` a bit more complicated than via `DT_FINI`.

The implementation works as follows:
- While scanning the binary: find the section where `DT_FINI_ARRAY`
points to, read its first dynamic relocation and use its addend to find
the address of the fini function we will use to hook;
- While writing the output file: overwrite the addend of the dynamic
relocation with the address of the runtime library's fini function.

Updating the dynamic relocation required a bit of boiler plate: since
dynamic relocations are stored in a `std::multiset` which doesn't
support getting mutable references to its items, functions were added to
`BinarySection` to take an existing relocation and insert a new one.

bolt/include/bolt/Core/BinaryContext.h

@@ -680,6 +680,15 @@ public:
   /// the execution of the binary is completed.
   std::optional<uint64_t> FiniFunctionAddress;
 
+  /// DT_FINI.
+  std::optional<uint64_t> FiniAddress;
+
+  /// DT_FINI_ARRAY. Only used when DT_FINI is not set.
+  std::optional<uint64_t> FiniArrayAddress;
+
+  /// DT_FINI_ARRAYSZ. Only used when DT_FINI is not set.
+  std::optional<uint64_t> FiniArraySize;
+
   /// Page alignment used for code layout.
   uint64_t PageAlign{HugePageSize};
 

bolt/include/bolt/Core/BinarySection.h

@@ -375,8 +375,12 @@ public:
   /// Add a dynamic relocation at the given /p Offset.
   void addDynamicRelocation(uint64_t Offset, MCSymbol *Symbol, uint64_t Type,
                             uint64_t Addend, uint64_t Value = 0) {
-    assert(Offset < getSize() && "offset not within section bounds");
-    DynamicRelocations.emplace(Relocation{Offset, Symbol, Type, Addend, Value});
+    addDynamicRelocation(Relocation{Offset, Symbol, Type, Addend, Value});
+  }
+
+  void addDynamicRelocation(const Relocation &Reloc) {
+    assert(Reloc.Offset < getSize() && "offset not within section bounds");
+    DynamicRelocations.emplace(Reloc);
   }
 
   /// Add relocation against the original contents of this section.
@@ -410,6 +414,18 @@ public:
     return Itr != DynamicRelocations.end() ? &*Itr : nullptr;
   }
 
+  std::optional<Relocation> takeDynamicRelocationAt(uint64_t Offset) {
+    Relocation Key{Offset, 0, 0, 0, 0};
+    auto Itr = DynamicRelocations.find(Key);
+
+    if (Itr == DynamicRelocations.end())
+      return std::nullopt;
+
+    Relocation Reloc = *Itr;
+    DynamicRelocations.erase(Itr);
+    return Reloc;
+  }
+
   uint64_t hash(const BinaryData &BD) const {
     std::map<const BinaryData *, uint64_t> Cache;
     return hash(BD, Cache);

bolt/include/bolt/Rewrite/RewriteInstance.h

@@ -95,6 +95,15 @@ private:
   /// from meta data in the file.
   void discoverFileObjects();
 
+  /// Check whether we should use DT_FINI or DT_FINI_ARRAY for instrumentation.
+  /// DT_FINI is preferred; DT_FINI_ARRAY is only used when no DT_FINI entry was
+  /// found.
+  Error discoverRtFiniAddress();
+
+  /// If DT_FINI_ARRAY is used for instrumentation, update the relocation of its
+  /// first entry to point to the instrumentation library's fini address.
+  void updateRtFiniReloc();
+
   /// Create and initialize metadata rewriters for this instance.
   void initializeMetadataManager();
 

bolt/lib/Core/Relocation.cpp

@@ -365,7 +365,9 @@ static uint64_t encodeValueAArch64(uint64_t Type, uint64_t Value, uint64_t PC) {
   switch (Type) {
   default:
     llvm_unreachable("unsupported relocation");
+  case ELF::R_AARCH64_ABS16:
   case ELF::R_AARCH64_ABS32:
+  case ELF::R_AARCH64_ABS64:
     break;
   case ELF::R_AARCH64_PREL16:
   case ELF::R_AARCH64_PREL32:

bolt/lib/Rewrite/RewriteInstance.cpp

@@ -704,6 +704,10 @@ Error RewriteInstance::run() {
   adjustCommandLineOptions();
   discoverFileObjects();
 
+  if (opts::Instrument && !BC->IsStaticExecutable)
+    if (Error E = discoverRtFiniAddress())
+      return E;
+
   preprocessProfileData();
 
   // Skip disassembling if we have a translation table and we are running an
@@ -740,6 +744,9 @@ Error RewriteInstance::run() {
 
   updateMetadata();
 
+  if (opts::Instrument && !BC->IsStaticExecutable)
+    updateRtFiniReloc();
+
   if (opts::LinuxKernelMode) {
     errs() << "BOLT-WARNING: not writing the output file for Linux Kernel\n";
     return Error::success();
@@ -1280,6 +1287,77 @@ void RewriteInstance::discoverFileObjects() {
   registerFragments();
 }
 
+Error RewriteInstance::discoverRtFiniAddress() {
+  // Use DT_FINI if it's available.
+  if (BC->FiniAddress) {
+    BC->FiniFunctionAddress = BC->FiniAddress;
+    return Error::success();
+  }
+
+  if (!BC->FiniArrayAddress || !BC->FiniArraySize) {
+    return createStringError(
+        std::errc::not_supported,
+        "Instrumentation needs either DT_FINI or DT_FINI_ARRAY");
+  }
+
+  if (*BC->FiniArraySize < BC->AsmInfo->getCodePointerSize()) {
+    return createStringError(std::errc::not_supported,
+                             "Need at least 1 DT_FINI_ARRAY slot");
+  }
+
+  ErrorOr<BinarySection &> FiniArraySection =
+      BC->getSectionForAddress(*BC->FiniArrayAddress);
+  if (auto EC = FiniArraySection.getError())
+    return errorCodeToError(EC);
+
+  if (const Relocation *Reloc = FiniArraySection->getDynamicRelocationAt(0)) {
+    BC->FiniFunctionAddress = Reloc->Addend;
+    return Error::success();
+  }
+
+  if (const Relocation *Reloc = FiniArraySection->getRelocationAt(0)) {
+    BC->FiniFunctionAddress = Reloc->Value;
+    return Error::success();
+  }
+
+  return createStringError(std::errc::not_supported,
+                           "No relocation for first DT_FINI_ARRAY slot");
+}
+
+void RewriteInstance::updateRtFiniReloc() {
+  // Updating DT_FINI is handled by patchELFDynamic.
+  if (BC->FiniAddress)
+    return;
+
+  const RuntimeLibrary *RT = BC->getRuntimeLibrary();
+  if (!RT || !RT->getRuntimeFiniAddress())
+    return;
+
+  assert(BC->FiniArrayAddress && BC->FiniArraySize &&
+         "inconsistent .fini_array state");
+
+  ErrorOr<BinarySection &> FiniArraySection =
+      BC->getSectionForAddress(*BC->FiniArrayAddress);
+  assert(FiniArraySection && ".fini_array removed");
+
+  if (std::optional<Relocation> Reloc =
+          FiniArraySection->takeDynamicRelocationAt(0)) {
+    assert(Reloc->Addend == BC->FiniFunctionAddress &&
+           "inconsistent .fini_array dynamic relocation");
+    Reloc->Addend = RT->getRuntimeFiniAddress();
+    FiniArraySection->addDynamicRelocation(*Reloc);
+  }
+
+  // Update the static relocation by adding a pending relocation which will get
+  // patched when flushPendingRelocations is called in rewriteFile. Note that
+  // flushPendingRelocations will calculate the value to patch as
+  // "Symbol + Addend". Since we don't have a symbol, just set the addend to the
+  // desired value.
+  FiniArraySection->addPendingRelocation(Relocation{
+      /*Offset*/ 0, /*Symbol*/ nullptr, /*Type*/ Relocation::getAbs64(),
+      /*Addend*/ RT->getRuntimeFiniAddress(), /*Value*/ 0});
+}
+
 void RewriteInstance::registerFragments() {
   if (!BC->HasSplitFunctions)
     return;
@@ -5135,7 +5213,13 @@ Error RewriteInstance::readELFDynamic(ELFObjectFile<ELFT> *File) {
       }
       break;
     case ELF::DT_FINI:
-      BC->FiniFunctionAddress = Dyn.getPtr();
+      BC->FiniAddress = Dyn.getPtr();
+      break;
+    case ELF::DT_FINI_ARRAY:
+      BC->FiniArrayAddress = Dyn.getPtr();
+      break;
+    case ELF::DT_FINI_ARRAYSZ:
+      BC->FiniArraySize = Dyn.getPtr();
       break;
     case ELF::DT_RELA:
       DynamicRelocationsAddress = Dyn.getPtr();

bolt/lib/RuntimeLibs/InstrumentationRuntimeLibrary.cpp

@@ -65,13 +65,6 @@ void InstrumentationRuntimeLibrary::adjustCommandLineOptions(
     exit(1);
   }
 
-  if (!BC.FiniFunctionAddress && !BC.IsStaticExecutable) {
-    errs() << "BOLT-ERROR: input binary lacks DT_FINI entry in the dynamic "
-              "section but instrumentation currently relies on patching "
-              "DT_FINI to write the profile\n";
-    exit(1);
-  }
-
   if ((opts::InstrumentationWaitForks || opts::InstrumentationSleepTime) &&
       opts::InstrumentationFileAppendPID) {
     errs()

bolt/test/AArch64/hook-fini.s

@@ -0,0 +1,103 @@
+## Test the different ways of hooking the fini function for instrumentation (via
+## DT_FINI and via DT_FINI_ARRAY). We test the latter for both PIE and non-PIE
+## binaries because of the different ways of handling relocations (static or
+## dynamic).
+## All tests perform the following steps:
+## - Compile and link for the case to be tested
+## - Some sanity-checks on the dynamic section and relocations in the binary to
+##   verify it has the shape we want for testing:
+##   - DT_FINI or DT_FINI_ARRAY in dynamic section
+##   - No relative relocations for non-PIE
+## - Instrument
+## - Verify generated binary
+# REQUIRES: system-linux,bolt-runtime,target=aarch64{{.*}}
+
+# RUN: %clang %cflags -pie %s -Wl,-q -o %t.exe
+# RUN: llvm-readelf -d %t.exe | FileCheck --check-prefix=DYN-FINI %s
+# RUN: llvm-readelf -r %t.exe | FileCheck --check-prefix=RELOC-PIE %s
+# RUN: llvm-bolt %t.exe -o %t --instrument
+# RUN: llvm-readelf -drs %t | FileCheck --check-prefix=CHECK-FINI %s
+
+# RUN: %clang %cflags -pie %s -Wl,-q,-fini=0 -o %t-no-fini.exe
+# RUN: llvm-readelf -d %t-no-fini.exe | FileCheck --check-prefix=DYN-NO-FINI %s
+# RUN: llvm-readelf -r %t-no-fini.exe | FileCheck --check-prefix=RELOC-PIE %s
+# RUN: llvm-bolt %t-no-fini.exe -o %t-no-fini --instrument
+# RUN: llvm-readelf -drs %t-no-fini | FileCheck --check-prefix=CHECK-NO-FINI %s
+# RUN: llvm-readelf -ds -x .fini_array %t-no-fini | FileCheck --check-prefix=CHECK-NO-FINI-RELOC %s
+
+## Create a dummy shared library to link against to force creation of the dynamic section.
+# RUN: %clang %cflags %p/../Inputs/stub.c -fPIC -shared -o %t-stubs.so
+# RUN: %clang %cflags %s -no-pie -Wl,-q,-fini=0 %t-stub.so -o %t-no-pie-no-fini.exe
+# RUN: llvm-readelf -r %t-no-pie-no-fini.exe | FileCheck --check-prefix=RELOC-NO-PIE %s
+# RUN: llvm-bolt %t-no-pie-no-fini.exe -o %t-no-pie-no-fini --instrument
+# RUN: llvm-readelf -ds -x .fini_array %t-no-pie-no-fini | FileCheck --check-prefix=CHECK-NO-PIE-NO-FINI %s
+
+## With fini: dynamic section should contain DT_FINI
+# DYN-FINI: (FINI)
+
+## Without fini: dynamic section should only contain DT_FINI_ARRAY
+# DYN-NO-FINI-NOT: (FINI)
+# DYN-NO-FINI:     (FINI_ARRAY)
+# DYN-NO-FINI:     (FINI_ARRAYSZ)
+
+## With PIE: binary should have relative relocations
+# RELOC-PIE: R_AARCH64_RELATIVE
+
+## Without PIE: binary should not have relative relocations
+# RELOC-NO-PIE-NOT: R_AARCH64_RELATIVE
+
+## Check that DT_FINI is set to __bolt_runtime_fini
+# CHECK-FINI:     Dynamic section at offset {{.*}} contains {{.*}} entries:
+# CHECK-FINI-DAG: (FINI) 0x[[FINI:[[:xdigit:]]+]]
+# CHECK-FINI-DAG: (FINI_ARRAY) 0x[[FINI_ARRAY:[[:xdigit:]]+]]
+## Check that the dynamic relocation at .fini_array was not patched
+# CHECK-FINI:     Relocation section '.rela.dyn' at offset {{.*}} contains {{.*}} entries
+# CHECK-FINI-NOT: {{0+}}[[FINI_ARRAY]] {{.*}} R_AARCH64_RELATIVE [[FINI]]
+# CHECK-FINI:     Symbol table '.symtab' contains {{.*}} entries:
+# CHECK-FINI:     {{0+}}[[FINI]] {{.*}} __bolt_runtime_fini
+
+## Check that DT_FINI_ARRAY has a dynamic relocation for __bolt_runtime_fini
+# CHECK-NO-FINI:     Dynamic section at offset {{.*}} contains {{.*}} entries:
+# CHECK-NO-FINI-NOT: (FINI)
+# CHECK-NO-FINI:     (FINI_ARRAY) 0x[[FINI_ARRAY:[[:xdigit:]]+]]
+# CHECK-NO-FINI:     Relocation section '.rela.dyn' at offset {{.*}} contains {{.*}} entries
+# CHECK-NO-FINI:     {{0+}}[[FINI_ARRAY]] {{.*}} R_AARCH64_RELATIVE [[FINI_ADDR:[[:xdigit:]]+]]
+# CHECK-NO-FINI:     Symbol table '.symtab' contains {{.*}} entries:
+# CHECK-NO-FINI:     {{0+}}[[FINI_ADDR]] {{.*}} __bolt_runtime_fini
+
+## Check that the static relocation in .fini_array is patched even for PIE
+# CHECK-NO-FINI-RELOC: Dynamic section at offset {{.*}} contains {{.*}} entries:
+# CHECK-NO-FINI-RELOC: (FINI_ARRAY) 0x[[FINI_ARRAY:[[:xdigit:]]+]]
+# CHECK-NO-FINI-RELOC: Symbol table '.symtab' contains {{.*}} entries:
+## Read  bytes separately so we can reverse them later
+# CHECK-NO-FINI-RELOC: {{0+}}[[FINI_ADDR_B0:[[:xdigit:]]{2}]][[FINI_ADDR_B1:[[:xdigit:]]{2}]][[FINI_ADDR_B2:[[:xdigit:]]{2}]][[FINI_ADDR_B3:[[:xdigit:]]{2}]] {{.*}} __bolt_runtime_fini
+# CHECK-NO-FINI-RELOC: Hex dump of section '.fini_array':
+# CHECK-NO-FINI-RELOC: 0x{{0+}}[[FINI_ARRAY]] [[FINI_ADDR_B3]][[FINI_ADDR_B2]][[FINI_ADDR_B1]][[FINI_ADDR_B0]] 00000000
+
+## Check that DT_FINI_ARRAY has static relocation applied for __bolt_runtime_fini
+# CHECK-NO-PIE-NO-FINI:     Dynamic section at offset {{.*}} contains {{.*}} entries:
+# CHECK-NO-PIE-NO-FINI-NOT: (FINI)
+# CHECK-NO-PIE-NO-FINI:     (FINI_ARRAY) 0x[[FINI_ARRAY:[a-f0-9]+]]
+# CHECK-NO-PIE-NO-FINI:     Symbol table '.symtab' contains {{.*}} entries:
+## Read address bytes separately so we can reverse them later
+# CHECK-NO-PIE-NO-FINI:     {{0+}}[[FINI_ADDR_B0:[[:xdigit:]]{2}]][[FINI_ADDR_B1:[[:xdigit:]]{2}]][[FINI_ADDR_B2:[[:xdigit:]]{2}]][[FINI_ADDR_B3:[[:xdigit:]]{2}]] {{.*}} __bolt_runtime_fini
+# CHECK-NO-PIE-NO-FINI:     Hex dump of section '.fini_array':
+# CHECK-NO-PIE-NO-FINI:     0x{{0+}}[[FINI_ARRAY]] [[FINI_ADDR_B3]][[FINI_ADDR_B2]][[FINI_ADDR_B1]][[FINI_ADDR_B0]] 00000000
+
+  .globl _start
+  .type _start, %function
+_start:
+  # Dummy relocation to force relocation mode.
+  .reloc 0, R_AARCH64_NONE
+  ret
+.size _start, .-_start
+
+  .globl _fini
+  .type _fini, %function
+_fini:
+  ret
+  .size _fini, .-_fini
+
+  .section .fini_array,"aw"
+  .align 3
+  .dword _fini

bolt/test/runtime/AArch64/hook-fini.test

@@ -0,0 +1,61 @@
+# Test the different ways of hooking the fini function for instrumentation (via
+# DT_FINI and via DT_FINI_ARRAY). We test the latter for both PIE and non-PIE
+# binaries because of the different ways of handling relocations (static or
+# dynamic).
+# All tests perform the following steps:
+# - Compile and link for the case to be tested
+# - Some sanity-checks on the dynamic section and relocations in the binary to
+#   verify it has the shape we want for testing:
+#   - DT_FINI or DT_FINI_ARRAY in dynamic section
+#   - No relative relocations for non-PIE
+# - Instrument
+# - Run instrumented binary
+# - Verify generated profile
+REQUIRES: system-linux,bolt-runtime
+
+RUN: %clang %cflags -pie %p/Inputs/basic-instrumentation.s -Wl,-q -o %t.exe
+RUN: llvm-readelf -d %t.exe | FileCheck --check-prefix=DYN-FINI %s
+RUN: llvm-readelf -r %t.exe | FileCheck --check-prefix=RELOC-PIE %s
+RUN: llvm-bolt %t.exe -o %t --instrument \
+RUN:     --instrumentation-file=%t \
+RUN:     --instrumentation-file-append-pid
+RUN: rm -f %t.*.fdata
+RUN: %t
+RUN: cat %t.*.fdata | FileCheck %s
+
+RUN: %clang %cflags -pie %p/Inputs/basic-instrumentation.s -Wl,-q,-fini=0 -o %t-no-fini.exe
+RUN: llvm-readelf -d %t-no-fini.exe | FileCheck --check-prefix=DYN-NO-FINI %s
+RUN: llvm-readelf -r %t-no-fini.exe | FileCheck --check-prefix=RELOC-PIE %s
+RUN: llvm-bolt %t-no-fini.exe -o %t-no-fini --instrument \
+RUN:     --instrumentation-file=%t-no-fini \
+RUN:     --instrumentation-file-append-pid
+RUN: rm -f %t-no-fini.*.fdata
+RUN: %t-no-fini
+RUN: cat %t-no-fini.*.fdata | FileCheck %s
+
+RUN: %clang %cflags -no-pie %p/Inputs/basic-instrumentation.s -Wl,-q,-fini=0 -o %t-no-pie-no-fini.exe
+RUN: llvm-readelf -d %t-no-pie-no-fini.exe | FileCheck --check-prefix=DYN-NO-FINI %s
+RUN: llvm-readelf -r %t-no-pie-no-fini.exe | FileCheck --check-prefix=RELOC-NO-PIE %s
+RUN: llvm-bolt %t-no-pie-no-fini.exe -o %t-no-pie-no-fini --instrument \
+RUN:     --instrumentation-file=%t-no-pie-no-fini \
+RUN:     --instrumentation-file-append-pid
+RUN: rm -f %t-no-pie-no-fini.*.fdata
+RUN: %t-no-pie-no-fini
+RUN: cat %t-no-pie-no-fini.*.fdata | FileCheck %s
+
+# With fini: dynamic section should contain DT_FINI
+DYN-FINI: (FINI)
+
+# Without fini: dynamic section should only contain DT_FINI_ARRAY
+DYN-NO-FINI-NOT: (FINI)
+DYN-NO-FINI:     (FINI_ARRAY)
+DYN-NO-FINI:     (FINI_ARRAYSZ)
+
+# With PIE: binary should have relative relocations
+RELOC-PIE: R_AARCH64_RELATIVE
+
+# Without PIE: binary should not have relative relocations
+RELOC-NO-PIE-NOT: R_AARCH64_RELATIVE
+
+# The instrumented profile should at least say main was called once
+CHECK: main 0 0 1{{$}}