The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
Round 4. This time we should handle all instructions correctly, and not replace any operands that need to be constant with variables.
This was really hard to determine safely, so the helper function should be put into the Instruction API. I'll do that as a followup.
llvm-svn: 279443
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
llvm-svn: 279229
When comparing a User* to a BasicBlock::iterator in
passingValueIsAlwaysUndefined, don't dereference the iterator in case it
is end().
llvm-svn: 278872
This reverts commit r278660.
It causes downstream assertion failure in InstCombine on shuffle
instructions. Comes up in __mm_swizzle_epi32.
llvm-svn: 278672
The new version has several advantages:
1) IMSHO it's more readable and neater
2) It handles loads and stores properly
3) It can handle any number of incoming blocks rather than just two. I'll be taking advantage of this in a followup patch.
With this change we can now finally sink load-modify-store idioms such as:
if (a)
return *b += 3;
else
return *b += 4;
=>
%z = load i32, i32* %y
%.sink = select i1 %a, i32 5, i32 7
%b = add i32 %z, %.sink
store i32 %b, i32* %y
ret i32 %b
When this works for switches it'll be even more powerful.
llvm-svn: 278660
This generated IR based on the order of evaluation, which is different
between GCC and Clang. With that in mind you get bootstrap miscompares
if you compare a Clang built with GCC-built Clang vs. Clang built with
Clang-built Clang. Diagnosing that made my head hurt.
This also reverts commit r277337, which "fixed" the test case.
llvm-svn: 277820
Using RAUW was wrong here; if we have a switch transform such as:
18 -> 6 then
6 -> 0
If we use RAUW, while performing the second transform the *transformed* 6
from the first will be also replaced, so we end up with:
18 -> 0
6 -> 0
Found by clang stage2 bootstrap; testcase added.
llvm-svn: 277332
If a switch is sparse and all the cases (once sorted) are in arithmetic progression, we can extract the common factor out of the switch and create a dense switch. For example:
switch (i) {
case 5: ...
case 9: ...
case 13: ...
case 17: ...
}
can become:
if ( (i - 5) % 4 ) goto default;
switch ((i - 5) / 4) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
or even better:
switch ( ROTR(i - 5, 2) {
case 0: ...
case 1: ...
case 2: ...
case 3: ...
}
The division and remainder operations could be costly so we only do this if the factor is a power of two, and emit a right-rotate instead of a divide/remainder sequence. Dense switches can be lowered significantly better than sparse switches and can even be transformed into lookup tables.
llvm-svn: 277325
r273711 was reverted by r273743. The inliner needs to know about any
call sites in the inlined function. These were obscured if we replaced
a call to undef with an undef but kept the call around.
This fixes PR28298.
llvm-svn: 273753
reduce the number of comparisons.
Specifically, InstCombine can turn:
(i == 5334 || i == 5335)
into:
((i | 1) == 5335)
SimplifyCFG was already able to detect the pattern:
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This patch supersedes D21315 and resolves PR27555
(https://llvm.org/bugs/show_bug.cgi?id=27555).
Thanks to David and Chandler for the suggestions!
Author: Thomas Jablin (tjablin)
Reviewers: majnemer chandlerc halfdan cycheng
http://reviews.llvm.org/D21397
llvm-svn: 273639
Switch from m_Constant to m_APInt per David's request. NFC.
Author: Thomas Jablin (tjablin)
Reviewers: majnemer cycheng
http://reviews.llvm.org/D21440
llvm-svn: 272977
(i == 5334 || i == 5335)
to:
((i & -2) == 5334)
This transformation has some incorrect side conditions. Specifically, the
transformation is only applied when the right-hand side constant (5334 in
the example) is a power of two not equal and not equal to the negated mask.
These side conditions were added in r258904 to fix PR26323. The correct side
condition is that: ((Constant & Mask) == Constant)[(5334 & -2) == 5334].
It's a little bit hard to see why these transformations are correct and what
the side conditions ought to be. Here is a CVC3 program to verify them for
64-bit values:
ONE : BITVECTOR(64) = BVZEROEXTEND(0bin1, 63);
x : BITVECTOR(64);
y : BITVECTOR(64);
z : BITVECTOR(64);
mask : BITVECTOR(64) = BVSHL(ONE, z);
QUERY( (y & ~mask = y) =>
((x & ~mask = y) <=> (x = y OR x = (y | mask)))
);
Please note that each pattern must be a dual implication (<--> or iff). One
directional implication can create spurious matches. If the implication is
only one-way, an unsatisfiable condition on the left side can imply a
satisfiable condition on the right side. Dual implication ensures that
satisfiable conditions are transformed to other satisfiable conditions and
unsatisfiable conditions are transformed to other unsatisfiable conditions.
Here is a concrete example of a unsatisfiable condition on the left
implying a satisfiable condition on the right:
mask = (1 << z)
(x & ~mask) == y --> (x == y || x == (y | mask))
Substituting y = 3, z = 0 yields:
(x & -2) == 3 --> (x == 3 || x == 2)
The version of this code before r258904 had no side-conditions and
incorrectly justified itself in comments through one-directional
implication.
Thanks to Chandler for the suggestion!
Author: Thomas Jablin (tjablin)
Reviewers: chandlerc majnemer hfinkel cycheng
http://reviews.llvm.org/D21417
llvm-svn: 272873
If a local_unnamed_addr attribute is attached to a global, the address
is known to be insignificant within the module. It is distinct from the
existing unnamed_addr attribute in that it only describes a local property
of the module rather than a global property of the symbol.
This attribute is intended to be used by the code generator and LTO to allow
the linker to decide whether the global needs to be in the symbol table. It is
possible to exclude a global from the symbol table if three things are true:
- This attribute is present on every instance of the global (which means that
the normal rule that the global must have a unique address can be broken without
being observable by the program by performing comparisons against the global's
address)
- The global has linkonce_odr linkage (which means that each linkage unit must have
its own copy of the global if it requires one, and the copy in each linkage unit
must be the same)
- It is a constant or a function (which means that the program cannot observe that
the unique-address rule has been broken by writing to the global)
Although this attribute could in principle be computed from the module
contents, LTO clients (i.e. linkers) will normally need to be able to compute
this property as part of symbol resolution, and it would be inefficient to
materialize every module just to compute it.
See:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160509/356401.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20160516/356738.html
for earlier discussion.
Part of the fix for PR27553.
Differential Revision: http://reviews.llvm.org/D20348
llvm-svn: 272709
A basic block could contain:
%cp = cleanuppad []
cleanupret from %cp unwind to caller
This basic block is empty and is thus a candidate for removal. However,
there can be other uses of %cp outside of this basic block. This is
only possible in unreachable blocks.
Make our transform more correct by checking that the pad has a single
user before removing the BB.
This fixes PR28005.
llvm-svn: 271816
A cleanuppad is not cheap, they turn into many instructions and result
in additional spills and fills. It is not worth keeping a cleanuppad
around if all it does is hold a lifetime.end instruction.
N.B. We first try to merge the cleanuppad with another cleanuppad to
avoid dropping the lifetime and debug info markers.
llvm-svn: 270314
Summary: Set default branch weight to 1:1 if one of the branch has profile missing when simplifying CFG.
Reviewers: spatel, davidxl
Subscribers: danielcdh, llvm-commits
Differential Revision: http://reviews.llvm.org/D20307
llvm-svn: 269995
Summary: In sample profile, some branches may have profile missing due to profile inaccuracy. We want existing branch probability still valid after propagation.
Reviewers: hfinkel, davidxl, spatel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19948
llvm-svn: 269137
Retrying r268550/r268751 which were reverted at r268577/r268765 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken another guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268767
Retrying r268550 which was reverted at r268577 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken a guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268751
MemorySanitizer: use-of-uninitialized-value
0x4910e47 in count /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:159:12
0x4910e47 in countLeadingZeros<unsigned long> /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:183
0x4910e47 in FitWeights /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:855
0x4910e47 in SimplifyCondBranchToCondBranch /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:2895
This reverts commit 609f4dd4bf3bc735c8c047a4d4b0a8e9e4d202e2.
llvm-svn: 268577
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268550
This patch fixes PR27615.
@llvm.dbg.value instructions no longer count towards the maximum number of
instructions to look back at in the instruction list when searching for a
store instruction. This should make the output consistent between debug and
non-debug build.
Patch by Henric Karlsson <henric.karlsson@ericsson.com>!
Differential Revision: http://reviews.llvm.org/D19912
llvm-svn: 268512
Make it possible that TryToSimplifyUncondBranchFromEmptyBlock merges empty
basic block including lifetime intrinsics as well as phi nodes and
unconditional branch into its successor or predecessor(s).
If successor of empty block has single predecessor, all contents including
lifetime intrinsics are sinked into the successor. Otherwise, they are
hoisted into its predecessor(s) and then merged into the predecessor(s).
Patch by Josh Yoon <josh.yoon@samsung.com>!
Differential Revision: http://reviews.llvm.org/D19257
llvm-svn: 268254
There's no existing test for this path, and I don't know how to expose
it in a regression test, but I'm assuming there's some reason this
path exists.
llvm-svn: 267813
When SimplifyCFG merges identical instructions from both sides of a diamond, it
can preserve !llvm.mem.parallel_loop_access (as it does with most of the other
metadata). There's no real data or control dependency change in this case.
llvm-svn: 267515
This patch improves SimplifyCFG to catch cases like:
if (a < b) {
if (a > b) <- known to be false
unreachable;
}
Phabricator Revision: http://reviews.llvm.org/D18905
llvm-svn: 266767
This is almost identical to:
http://reviews.llvm.org/rL264527
This doesn't solve PR27344; it just allows the profile weights to survive.
To solve the bug, we need to use the profile weights in the backend.
llvm-svn: 266442
Clarify what this RemapFlag actually means.
- Change the flag name to match its intended behaviour.
- Clearly document that it's not supposed to affect globals.
- Add a host of FIXMEs to indicate how to fix the behaviour to match
the intent of the flag.
RF_IgnoreMissingLocals should only affect the behaviour of
RemapInstruction for function-local operands; namely, for operands of
type Argument, Instruction, and BasicBlock. Currently, it is *only*
passed into RemapInstruction calls (and the transitive MapValue calls
that it makes).
When I split Metadata from Value I didn't understand the flag, and I
used it in a bunch of places for "global" metadata.
This commit doesn't have any functionality change, but prepares to
cleanup MapMetadata and MapValue.
llvm-svn: 265628
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264697
