This is partial step toward removing the vendored `unittest2` dep in
favor of the `unittest` library in standard python. One of the large
differences is when xfail decorators are evaluated. With the `unittest2`
vendored dep, this can happen at the moment of calling the test case,
and with LLDB's decorator wrappers, we are passed the test class in the
decorator arg. With the `unittest` framework, this is determined much
earlier; we cannot decide when the test is about to start that we need
to xfail.
Fortunately, almost none of these checks require any state that can't be
determined statically. For this patch, I moved the impl for all the
checks to `lldbplatformutil` and pointed the decorators to that,
removing as many `self` (i.e. test class object) references as possible.
I left wrappers within `TestBase` that forward to `lldbplatformutil` for
convenience, but we should probably remove those later.
The remaining check that can't be moved statically is the check for the
debug info type (e.g. to xfail only for dwarf). Fixing that requires a
different approach, so I will postpone that to the next patch.
This is a Linux pseudo register provided by the NT_ARM_TAGGED_ADDR_CTRL
register set. It reflects the value passed to prctl
PR_SET_TAGGED_ADDR_CTRL.
https://docs.kernel.org/arch/arm64/memory-tagging-extension.html
The fields are made from the #defines the kernel provides for setting
the value. Its contents are constant so no runtime detection is needed
(once we've decided we have this register in the first place).
The permitted generated tags is technically a bitfield but at this time
we don't have a way to mark a field as preferring hex formatting.
```
(lldb) register read mte_ctrl
mte_ctrl = 0x000000000007fffb
= (TAGS = 65535, TCF_ASYNC = 0, TCF_SYNC = 1, TAGGED_ADDR_ENABLE = 1)
```
(4 bit tags mean 16 possible tags, 16 bit bitfield)
Testing has been added to TestMTECtrlRegister.py, which needed a more
granular way to check for XML support, so I've added hasXMLSupport that
can be used within a test case instead of skipping whole tests if XML
isn't supported.
Same for the core file tests.
SME2 is documented as part of the main SME supplement:
https://developer.arm.com/documentation/ddi0616/latest/
The one change for debug is this new ZT0 register. This register
contains data to be used with new table lookup instructions.
It's size is always 512 bits (not scalable) and can be
interpreted in many different ways depending on the instructions
that use it.
The kernel has implemented this as a new register set containing
this single register. It always returns register data (with no header,
unlike ZA which does have a header).
https://docs.kernel.org/arch/arm64/sme.html
ZT0 is only active when ZA is active (when SVCR.ZA is 1). In the
inactive state the kernel returns 0s for its contents. Therefore
lldb doesn't need to create 0s like it does for ZA.
However, we will skip restoring the value of ZT0 if we know that
ZA is inactive. As writing to an inactive ZT0 sets SVCR.ZA to 1,
which is not desireable as it would activate ZA also. Whether
SVCR.ZA is set will be determined only by the ZA data we restore.
Due to this, I've added a new save/restore kind SME2. This is easier
than accounting for the variable length ZA in the SME data. We'll only
save an SME2 data block if ZA is active. If it's not we can get fresh
0s back from the kernel for ZT0 anyway so there's nothing for us to
restore.
This new register will only show up if the system has SME2 therefore
the SME set presented to the user may change, and I've had to account
for that in in a few places.
I've referred to it internally as simply "ZT" as the kernel does in
NT_ARM_ZT, but the architecture refers to the specific register as "ZT0"
so that's what you'll see in lldb.
```
(lldb) register read -s 6
Scalable Matrix Extension Registers:
svcr = 0x0000000000000000
svg = 0x0000000000000004
za = {0x00 <...> 0x00}
zt0 = {0x00 <...> 0x00}
```
FEAT_SME_FA64 (smefa64 in Linux cpuinfo) allows the use of the full A64
instruction set while in streaming SVE mode.
See https://developer.arm.com/documentation/ddi0616/latest/ for details.
This means for example if we want to write to the ffr register during or
use floating point registers while in streaming mode, we need this
extension.
I initially was using QEMU which has it by default, and switched to
Arm's FVP which does not. So this change adds a more strict check and
converts most of the tests to use that. It would be possible in some
cases to avoid the offending instructions but it would be a lot of
effort and liable to fail randomly as the C library changes.
It is also my assumption that the majority of systems will have smefa64
as QEMU has chosen to have. If I turn out to be wrong, we can make the
effort to get the tests working without smefa64.
`isAArch64SME` remains for some tests, which are as follows:
* `test_aarch64_dynamic_regset_config` merely checks for the presence of
a register set, which appears for any SME system not just one with
smefa64.
* `test_aarch64_dynamic_regset_config_sme_za_disabled` only needs the ZA
register and does not enter streaming mode.
* `test_sme_not_present` tests for the absence of the SME register set,
so must be skipped if any form of SME is present.
* Various tests in `TestSVERegisters.py` need to know if SME is present
at all to generate an expected SVCR value. Earlier in the callstack
something else checked `isAArch64SMEFA64` already.
* `TestAArch64LinuxTLSRegisters.py` needs to test the `tpidr2` register
if any form of SME is present. msr/mrs instructions are used to do this
and are allowed even if smefa64 is not present.
Rename lldb-vscode to lldb-dap. This change is largely mechanical. The
following substitutions cover the majority of the changes in this
commit:
s/VSCODE/DAP/
s/VSCode/DAP/
s/vscode/dap/
s/g_vsc/g_dap/
Discourse RFC:
https://discourse.llvm.org/t/rfc-rename-lldb-vscode-to-lldb-dap/74075/
This reverts commit 8012518f600bebaa4ed99a57d553eeea25c2d0c9.
The x86 register write test had one that expected "\$rax" so on.
As these patterns were previously regex, the $ had to be escaped.
Now they are just plain strings to this is not needed.
* Assert no completions for tests that should not find completions.
* Remove regex mode from complete_from_to, which was unused.
This exposed bugs in 2 of the tests, target stop-hook and
process unload. These were fixed in previous commits but
couldn't be tested properly until this patch.
These were useful primarily for the Python 2 to 3 transition. Python 2
is no longer supported so these are no longer necessary.
Differential Revision: https://reviews.llvm.org/D157759
"sme" is just one of many cpuinfo features for SME but it's the
only one we need for testing.
The rest are related to the use of certain instructions and
don't change the register state available.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154823
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
Since 44363f2 various tests have started passing but introduced a
expression evaluation failure in TestDataFormatterSynthVal.py.
This patch marks the expression evaluation part as skipped while rest
of the test passes.
This patch aslo introduces a new helper isAArch64Windows in lldbtest.py.
So far, the pretty printer for `std::coroutine_handle` internally
dereferenced the contained frame pointer displayed the `promise`
as a sub-value. As noticed in https://reviews.llvm.org/D132624
by @labath, this can lead to an endless loop in lldb during printing
if the coroutine frame pointers form a cycle.
This commit breaks the cycle by exposing the `promise` as a pointer
type instead of a value type. The depth to which the `frame variable`
and the `expression` commands dereference those pointers can be
controlled using the `--ptr-depth` argument.
Differential Revision: https://reviews.llvm.org/D132815
On systems like ARM, where the non-addressable bits of a pointer
value may be used for metadata (ARMv8.3 pointer authentication, or
Type Byte Ignore), those bits need to be cleared before the address
points to a valid memory location. Add a call to the target's ABI
to clear those from address expression arguments to the lldb
commands (e.g. `disassemble -a`).
Differential Revision: https://reviews.llvm.org/D141629
A previous patch added the ability for us to tell if types were forcefully completed. This patch adds the ability to see which modules have forcefully completed types and aggregates the number of modules with forcefully completed types at the root level.
We add a module specific setting named "debugInfoHadIncompleteTypes" that is a boolean value. We also aggregate the number of modules at the root level that had incomplete debug info with a key named "totalModuleCountWithIncompleteTypes" that is a count of number of modules that had incomplete types.
Differential Revision: https://reviews.llvm.org/D138638
This reverts commit cd3091a88f7c55c90d9b5fff372ce1cdfc71948d.
This change crashes on macOS systems in
formatters::StdlibCoroutineHandleSyntheticFrontEnd when
it fails to create the `ValueObjectSP promise` and calls
a method on it. The failure causes a segfault while running
TestCoroutineHandle.py on the "LLDB Incremental" CI bot,
https://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake/
This change originally landed via https://reviews.llvm.org/D132815
So far, the pretty printer for `std::coroutine_handle` internally
dereferenced the contained frame pointer displayed the `promise`
as a sub-value. As noticed in https://reviews.llvm.org/D132624
by @labath, this can lead to an endless loop in lldb during printing
if the coroutine frame pointers form a cycle.
This commit breaks the cycle by exposing the `promise` as a pointer
type instead of a value type. The depth to which the `frame variable`
and the `expression` commands dereference those pointers can be
controlled using the `--ptr-depth` argument.
Differential Revision: https://reviews.llvm.org/D132815
`re.Pattern` is introduced in Python 3.7. To support Python 3.6, fallback to typechecking against `SRE_Pattern`.
Differential Revision: https://reviews.llvm.org/D137582
I'm trying to add a test which tests that the same substr occurs twice in a row, but it matches even if only one of the substr occurs.
This found a bug in concurrent_base.py.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D135826
Currently, by default LLDB runs an API test with 3 variants,
one of which, depending on platform, is `gmodules`. However,
most tests don't actually make use of any specific `gmodules`
feature since they compile a single `main.cpp` file without
imporint types from other modules.
Instead of running all tests an extra time with `-gmodules`
enabled, we plan to test `gmodules` features with dedicated
API tests that explicitly opt-into compiling with `-gmodules`.
One of the main benefits of this will be a reduction in total
API test-suite run-time (by around 1/3).
This patch adds a flag to `debug_info_categories` that indicates
whether a category is eligible to be replicated by `lldbtest`.
Keeping `gmodules` a debug-info category is desirable because
`builder.py` knows how to inject the appropriate Makefile flags
into the build command for debug-info categories already. Whereas
for non-debug-info categories we'd have to teach it how to. The
category is inferred from the test-name debug-info suffix currently.
Differential Revision: https://reviews.llvm.org/D134524
This reverts commit ac05bc0524c66c74278b26742896a4c634c034cf.
I had incorrectly removed one set of checks in the option handling in
Options::ParseAlias because I couldn't see what it is for. It was a
bit obscure, but it handled the case where you pass "-something=other --"
as the input_line, which caused the built-in "run" alias not to return
the right value for IsDashDashCommand, causing TestHelp.py to fail.
This reverts commit 6c089b2af5d8d98f66b27b67f70958f520820a76.
This was causing the test test_help_run_hides_options from TestHelp.py to
fail on Linux and Windows (but the test succeeds on macOS). The decision
to print option information is determined by CommandObjectAlias::IsDashDashCommand
which was changed, but only by replacing an inline string constant with a const char *
CommandInterpreter::g_argument which has the same string value. I can't see why this
would fail, I'll have to spin up a vm to see if I can repo there.
This is particularly a problem for alias construction, where you might
want to have a backtick surrounded option in the alias. Before this
patch:
command alias expression -Z \`argc\` -- argv
for instance would be rendered as:
expression -Z argc -- argv
and would fail to work.
Differential Revision: https://reviews.llvm.org/D133045
Summary:
Many times when debugging variables might not be available even though a user can successfully set breakpoints and stops somewhere. Letting the user know will help users fix these kinds of issues and have a better debugging experience.
Examples of this include:
- enabling -gline-tables-only and being able to set file and line breakpoints and yet see no variables
- unable to open object file for DWARF in .o file debugging for darwin targets due to modification time mismatch or not being able to locate the N_OSO file.
This patch adds an new API to SBValueList:
lldb::SBError lldb::SBValueList::GetError();
object so that if you request a stack frame's variables using SBValueList SBFrame::GetVariables(...), you can get an error the describes why the variables were not available.
This patch adds the ability to get an error back when requesting variables from a lldb_private::StackFrame when calling GetVariableList.
It also now shows an error in response to "frame variable" if we have debug info and are unable to get varialbes due to an error as mentioned above:
(lldb) frame variable
error: "a.o" object from the "/tmp/libfoo.a" archive: either the .o file doesn't exist in the archive or the modification time (0x63111541) of the .o file doesn't match
Reviewers: labath JDevlieghere aadsm yinghuitan jdoerfert sscalpone
Subscribers:
Differential Revision: https://reviews.llvm.org/D133164
Many times when debugging variables might not be available even though a user can successfully set breakpoints and stops somewhere. Letting the user know will help users fix these kinds of issues and have a better debugging experience.
Examples of this include:
- enabling -gline-tables-only and being able to set file and line breakpoints and yet see no variables
- unable to open object file for DWARF in .o file debugging for darwin targets due to modification time mismatch or not being able to locate the N_OSO file.
This patch adds an new API to SBValueList:
lldb::SBError lldb::SBValueList::GetError();
object so that if you request a stack frame's variables using SBValueList SBFrame::GetVariables(...), you can get an error the describes why the variables were not available.
This patch adds the ability to get an error back when requesting variables from a lldb_private::StackFrame when calling GetVariableList.
It also now shows an error in response to "frame variable" if we have debug info and are unable to get varialbes due to an error as mentioned above:
(lldb) frame variable
error: "a.o" object from the "/tmp/libfoo.a" archive: either the .o file doesn't exist in the archive or the modification time (0x63111541) of the .o file doesn't match
Differential Revision: https://reviews.llvm.org/D133164
While investigation slow tests, I looked into why `TestMultithreaded.py`. One
of the reasons is that it determines the architecture of lldb by running:
```
lldb -o 'file path/to/lldb' -o 'quit'
```
On my fairly fast machine, this takes 24 seconds, and `TestMultithreaded.py`
calls this function 4 times.
With this change, this command now takes less than 0.2s on the same machine.
The reason it's slow is symbol table and debug info loading, as indicated by
the new progress events printed to the console. One setting reduced the time in
half:
```
settings set target.preload-symbols false
```
Further investigation, by profiling with Instruments on macOS, showed that
loading time was also caused by looking for scripts. The setting that
eliminates this time is:
```
settings set target.load-script-from-symbol-file false
```
Differential Revision: https://reviews.llvm.org/D132803
This patch adds a formatter for `std::coroutine_handle`, both for libc++
and libstdc++. For the type-erased `coroutine_handle<>`, it shows the
`resume` and `destroy` function pointers. For a non-type-erased
`coroutine_handle<promise_type>` it also shows the `promise` value.
With this change, executing the `v t` command on the example from
https://clang.llvm.org/docs/DebuggingCoroutines.html now outputs
```
(task) t = {
handle = coro frame = 0x55555555b2a0 {
resume = 0x0000555555555a10 (a.out`coro_task(int, int) at llvm-example.cpp:36)
destroy = 0x0000555555556090 (a.out`coro_task(int, int) at llvm-example.cpp:36)
}
}
```
instead of just
```
(task) t = {
handle = {
__handle_ = 0x55555555b2a0
}
}
```
Note, how the symbols for the `resume` and `destroy` function pointer
reveal which coroutine is stored inside the `std::coroutine_handle`.
A follow-up commit will use this fact to infer the coroutine's promise
type and the representation of its internal coroutine state based on
the `resume` and `destroy` pointers.
The same formatter is used for both libc++ and libstdc++. It would
also work for MSVC's standard library, however it is not registered
for MSVC, given that lldb does not provide pretty printers for other
MSVC types, either.
The formatter is in a newly added `Coroutines.{h,cpp}` file because there
does not seem to be an already existing place where we could share
formatters across libc++ and libstdc++. Also, I expect this code to grow
as we improve debugging experience for coroutines further.
**Testing**
* Added API test
Differential Revision: https://reviews.llvm.org/D132415
Add a function to make it easier to debug a test failure caused by an
unexpected stop reason. This is similar to the assertState helper that
was added in ce825e46743b.
Before:
self.assertEqual(stop_reason, lldb.eStopReasonInstrumentation)
AssertionError: 5 != 10
After:
self.assertStopReason(stop_reason, lldb.eStopReasonInstrumentation)
AssertionError: signal (5) != instrumentation (10)
Differential revision: https://reviews.llvm.org/D131083
This recommits b15b1421, which reverted in was reverted in f51c47d98 due to
failures on apple systems. The problem was that the patch introduced a race
where the debug server could start the attach process before the first process
(which isn't supposed to be attached to) was set up. This caused us to attach
to the wrong process.
The new version introduces additional synchronization to ensure that does not
happen.
Original commit message was:
As the documentation states, using this is not safe in multithreaded
programs, and I have traced it to a rare deadlock in some of the tests.
The reason this was introduced was to be able to attach to a program
from the very first instruction, where our usual mechanism of
synchronization -- waiting for a file to appear -- does not work.
However, this is only needed for a single test
(TestGdbRemoteAttachWait) so instead of doing this everywhere, I create
a bespoke solution for that single test. The solution basically
consists of outsourcing the preexec_fn code to a separate (and
single-threaded) shim process, which enables attaching and then executes
the real program.
This pattern could be generalized in case we needed to use it for other
tests, but I suspect that we will not be having many tests like this.
This effectively reverts commit
a997a1d7fbe229433fb458bb0035b32424ecf3bd.
As the documentation states, using this is not safe in multithreaded
programs, and I have traced it to a rare deadlock in some of the tests.
The reason this was introduced was to be able to attach to a program
from the very first instruction, where our usual mechanism of
synchronization -- waiting for a file to appear -- does not work.
However, this is only needed for a single test
(TestGdbRemoteAttachWait) so instead of doing this everywhere, I create
a bespoke solution for that single test. The solution basically
consists of outsourcing the preexec_fn code to a separate (and
single-threaded) shim process, which enables attaching and then executes
the real program.
This pattern could be generalized in case we needed to use it for other
tests, but I suspect that we will not be having many tests like this.
This effectively reverts commit
a997a1d7fbe229433fb458bb0035b32424ecf3bd.
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
Add a function to make it easier to debug a test failure caused by an
unexpected state.
Currently, tests are using assertEqual which results in a cryptic error
message: "AssertionError: 5 != 10". Even when a test provides a message
to make it clear why a particular state is expected, you still have to
figure out which of the two was the expected state, and what the other
value corresponds to.
We have a function in lldbutil that helps you convert the state number
into a user readable string. This patch adds a wrapper around
assertEqual specifically for comparing states and reporting better error
messages.
The aforementioned error message now looks like this: "AssertionError:
stopped (5) != exited (10)". If the user provided a message, that
continues to get printed as well.
Differential revision: https://reviews.llvm.org/D127355
This patch adds a minor fix in lldbtest.py TestBase.generateSource
function. Generated Python source with directory paths was not being
escaped properly. This fix makes sure we treat dir path as raw string.
distutils is deprecated and shutil.which is the suggested
replacement for this function.
https://peps.python.org/pep-0632/#migration-advicehttps://docs.python.org/3/library/shutil.html#shutil.which
It was added in Python3.3 but given that we're already using
shutil.which elsewhere I think this is ok/no worse than before.
We do have our own find_executable in lldb/test/Shell/helper/build.py
but I'd rather leave that as is for now. Also we have our own versions
of which() but again, a change for another time.
This work is part of #54337.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D124601
Add `IsAggregateType` to the SB API.
I'd like to use this from tests, and there are numerous other `Is<X>Type`
predicates on `SBType`.
Differential Revision: https://reviews.llvm.org/D121252
The race is between these two pieces of code that are executed in two separate
lldb-vscode threads (the first is in the main thread and another is in the
event-handling thread):
```
// lldb-vscode.cpp
g_vsc.debugger.SetAsync(false);
g_vsc.target.Launch(launch_info, error);
g_vsc.debugger.SetAsync(true);
```
```
// Target.cpp
bool old_async = debugger.GetAsyncExecution();
debugger.SetAsyncExecution(true);
debugger.GetCommandInterpreter().HandleCommands(GetCommands(), exc_ctx,
options, result);
debugger.SetAsyncExecution(old_async);
```
The sequence that leads to the bug is this one:
1. Main thread enables synchronous mode and launches the process.
2. When the process is launched, it generates the first stop event.
3. This stop event is catched by the event-handling thread and DoOnRemoval
is invoked.
4. Inside DoOnRemoval, this thread runs stop hooks. And before running stop
hooks, the current synchronization mode is stored into old_async (and
right now it is equal to "false").
5. The main thread finishes the launch and returns to lldb-vscode, the
synchronization mode is restored to asynchronous by lldb-vscode.
6. Event-handling thread finishes stop hooks processing and restores the
synchronization mode according to old_async (i.e. makes the mode synchronous)
7. And now the mode is synchronous while lldb-vscode expects it to be
asynchronous. Synchronous mode forbids the process to broadcast public stop
events, so, VS Code just hangs because lldb-vscode doesn't notify it about
stops.
So, this diff makes the target intercept the first stop event if the process is
launched in the synchronous mode, thus preventing stop hooks execution.
The bug is only present on Windows because other platforms already
intercept this event using their own hijacking listeners.
So, this diff also fixes some problems with lldb-vscode tests on Windows to make
it possible to run the related test. Other tests still can't be enabled because
the debugged program prints something into stdout and LLDB can't intercept this
output and redirect it to lldb-vscode properly.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D119548
It was being used only in some very old tests (which pass even without
it) and its implementation is highly questionable.
These days we have different mechanisms for requesting a build with a
particular kind of c++ library (USE_LIB(STD)CPP in the makefile).
This is an updated version of the https://reviews.llvm.org/D113789 patch with the following changes:
- We no longer modify modification times of the cache files
- Use LLVM caching and cache pruning instead of making a new cache mechanism (See DataFileCache.h/.cpp)
- Add signature to start of each file since we are not using modification times so we can tell when caches are stale and remove and re-create the cache file as files are changed
- Add settings to control the cache size, disk percentage and expiration in days to keep cache size under control
This patch enables symbol tables to be cached in the LLDB index cache directory. All cache files are in a single directory and the files use unique names to ensure that files from the same path will re-use the same file as files get modified. This means as files change, their cache files will be deleted and updated. The modification time of each of the cache files is not modified so that access based pruning of the cache can be implemented.
The symbol table cache files start with a signature that uniquely identifies a file on disk and contains one or more of the following items:
- object file UUID if available
- object file mod time if available
- object name for BSD archive .o files that are in .a files if available
If none of these signature items are available, then the file will not be cached. This keeps temporary object files from expressions from being cached.
When the cache files are loaded on subsequent debug sessions, the signature is compare and if the file has been modified (uuid changes, mod time changes, or object file mod time changes) then the cache file is deleted and re-created.
Module caching must be enabled by the user before this can be used:
symbols.enable-lldb-index-cache (boolean) = false
(lldb) settings set symbols.enable-lldb-index-cache true
There is also a setting that allows the user to specify a module cache directory that defaults to a directory that defaults to being next to the symbols.clang-modules-cache-path directory in a temp directory:
(lldb) settings show symbols.lldb-index-cache-path
/var/folders/9p/472sr0c55l9b20x2zg36b91h0000gn/C/lldb/IndexCache
If this setting is enabled, the finalized symbol tables will be serialized and saved to disc so they can be quickly loaded next time you debug.
Each module can cache one or more files in the index cache directory. The cache file names must be unique to a file on disk and its architecture and object name for .o files in BSD archives. This allows universal mach-o files to support caching multuple architectures in the same module cache directory. Making the file based on the this info allows this cache file to be deleted and replaced when the file gets updated on disk. This keeps the cache from growing over time during the compile/edit/debug cycle and prevents out of space issues.
If the cache is enabled, the symbol table will be loaded from the cache the next time you debug if the module has not changed.
The cache also has settings to control the size of the cache on disk. Each time LLDB starts up with the index cache enable, the cache will be pruned to ensure it stays within the user defined settings:
(lldb) settings set symbols.lldb-index-cache-expiration-days <days>
A value of zero will disable cache files from expiring when the cache is pruned. The default value is 7 currently.
(lldb) settings set symbols.lldb-index-cache-max-byte-size <size>
A value of zero will disable pruning based on a total byte size. The default value is zero currently.
(lldb) settings set symbols.lldb-index-cache-max-percent <percentage-of-disk-space>
A value of 100 will allow the disc to be filled to the max, a value of zero will disable percentage pruning. The default value is zero.
Reviewed By: labath, wallace
Differential Revision: https://reviews.llvm.org/D115324
Introduce a FreeBSDKernel plugin that provides the ability to read
FreeBSD kernel core dumps. The plugin utilizes libfbsdvmcore to provide
support for both "full memory dump" and minidump formats across variety
of architectures supported by FreeBSD. It provides the ability to read
kernel memory, as well as the crashed thread status with registers
on arm64, i386 and x86_64.
Differential Revision: https://reviews.llvm.org/D114911
Introduce a FreeBSDKernel plugin that provides the ability to read
FreeBSD kernel core dumps. The plugin utilizes libfbsdvmcore to provide
support for both "full memory dump" and minidump formats across variety
of architectures supported by FreeBSD. It provides the ability to read
kernel memory, as well as the crashed thread status with registers
on arm64, i386 and x86_64.
Differential Revision: https://reviews.llvm.org/D114911
