I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
llvm-svn: 313640
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313589
If we have an AssertZext of a truncated value that has already been AssertZext'ed,
we can assert on the wider source op to improve the zext-y knowledge:
assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
This moves a fold from being Mips-specific to general combining, and x86 shows
improvements.
Differential Revision: https://reviews.llvm.org/D37017
llvm-svn: 313577
rL310710 allowed store merging to occur after legalization to catch stores that are created late,
but this exposes a logic hole seen in PR34217:
https://bugs.llvm.org/show_bug.cgi?id=34217
We will miss merging stores if the target lowers vector extracts into target-specific operations.
This patch allows store merging to occur both before and after legalization if the target chooses
to get maximum merging.
I don't think the potential regressions in the other tests are relevant. The tests are for
correctness of weird IR constructs rather than perf tests, and I think those are still correct.
Differential Revision: https://reviews.llvm.org/D37987
llvm-svn: 313564
r313390 taught 'allowExtraAnalysis' to check whether remarks are
enabled at all. Use that to only do the expensive instruction printing
if they are.
llvm-svn: 313552
For cases where we are BITCASTing to vectors of smaller elements, then if the entire source was a splatted sign (src's NumSignBits == SrcBitWidth) we can say that the dst's NumSignBit == DstBitWidth, as we're just splitting those sign bits across multiple elements.
We could generalize this but at the moment the only use case I have is to peek through bitcasts to vector comparison results.
Differential Revision: https://reviews.llvm.org/D37849
llvm-svn: 313543
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
llvm-svn: 313431
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
llvm-svn: 313400
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
llvm-svn: 313399
This means that we can honor -fdata-sections rather than
always creating a segment for each symbol.
It also allows for a followup change to add .init_array and friends.
Differential Revision: https://reviews.llvm.org/D37876
llvm-svn: 313395
Previously the 'Padding' argument was the number of padding
bytes to add. However most callers that use 'Padding' know
how many overall bytes they need to write. With the previous
code this would mean encoding the LEB once to find out how
many bytes it would occupy and then using this to calulate
the 'Padding' value.
See: https://reviews.llvm.org/D36595
Differential Revision: https://reviews.llvm.org/D37494
llvm-svn: 313393
This caused PR34629: asserts firing when building Chromium. It also broke some
buildbots building test-suite as reported on the commit thread.
> Summary:
> 1/ Operand folding during complex pattern matching for LEAs has been
> extended, such that it promotes Scale to accommodate similar operand
> appearing in the DAG.
> e.g.
> T1 = A + B
> T2 = T1 + 10
> T3 = T2 + A
> For above DAG rooted at T3, X86AddressMode will no look like
> Base = B , Index = A , Scale = 2 , Disp = 10
>
> 2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs
> so that if there is an opportunity then complex LEAs (having 3 operands)
> could be factored out.
> e.g.
> leal 1(%rax,%rcx,1), %rdx
> leal 1(%rax,%rcx,2), %rcx
> will be factored as following
> leal 1(%rax,%rcx,1), %rdx
> leal (%rdx,%rcx) , %edx
>
> 3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops,
> thus avoiding creation of any complex LEAs within a loop.
>
> Reviewers: lsaba, RKSimon, craig.topper, qcolombet
>
> Reviewed By: lsaba
>
> Subscribers: spatel, igorb, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 313376
Summary:
The checksums had already been placed in the IR, this patch allows
MCCodeView to actually write it out to an MCStreamer.
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37157
llvm-svn: 313374
removing them"
This was temporarily reverted, but now that the fix has been commited (r313197)
it should be put back in place.
https://bugs.llvm.org/show_bug.cgi?id=34502
This reverts commit 9ef93d9dc4c51568e858cf8203cd2c5ce8dca796.
llvm-svn: 313349
Summary:
1/ Operand folding during complex pattern matching for LEAs has been
extended, such that it promotes Scale to accommodate similar operand
appearing in the DAG.
e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will no look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs
so that if there is an opportunity then complex LEAs (having 3 operands)
could be factored out.
e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops,
thus avoiding creation of any complex LEAs within a loop.
Reviewers: lsaba, RKSimon, craig.topper, qcolombet
Reviewed By: lsaba
Subscribers: spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
llvm-svn: 313343
These are removed in C++17. We still have some users of
unary_function::argument_type, so just spell that typedef out. No
functionality change intended.
Note that many of the argument types are actually wrong :)
llvm-svn: 313287
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
llvm-svn: 313271
We already have a combine for this pattern when the input to shl is add, so we just need to enable the transformation when the input is or.
Original patch by @tstellar
Differential Revision: https://reviews.llvm.org/D19325
llvm-svn: 313251
Use RotAmt.urem(VTBits) instead of AND(RotAmt, VTBits - 1)
TBH I don't expect non-power-of-2 types to be created, but it makes the logic clearer and matches what we do in other rotation combines.
llvm-svn: 313245
Summary:
XRay had been assuming that the previous section is the "text" section
of the function when lowering the instrumentation map. Unfortunately
this is not a safe assumption, because we may be coming from lowering
debug type information for the function being lowered.
This fixes an issue with combining -gsplit-dwarf, -generate-type-units,
-debug-compile and -fxray-instrument for sole member functions. When the
split dwarf section is stripped, we're left with references from the
xray_instr_map to the debug section. The change now uses the function's
symbol instead of the previous section's start symbol.
We found the bug while attempting to strip the split debug sections off
an XRay-instrumented object file, which had a peculiar edge-case for
single-function classes where the single function is being lowered.
Because XRay had assocaited the instrumentation map for a function to
the debug types section instead of the function's section, the objcopy
call will fail due to the misplaced reference from the xray_instr_map
section.
Reviewers: pcc, dblaikie, echristo
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D37791
llvm-svn: 313233
This caused PR34596.
> [MachineCombiner] Update instruction depths incrementally for large BBs.
>
> Summary:
> For large basic blocks with lots of combinable instructions, the
> MachineTraceMetrics computations in MachineCombiner can dominate the compile
> time, as computing the trace information is quadratic in the number of
> instructions in a BB and it's relevant successors/predecessors.
>
> In most cases, knowing the instruction depth should be enough to make
> combination decisions. As we already iterate over all instructions in a basic
> block, the instruction depth can be computed incrementally. This reduces the
> cost of machine-combine drastically in cases where lots of instructions
> are combined. The major drawback is that AFAIK, computing the critical path
> length cannot be done incrementally. Therefore we only compute
> instruction depths incrementally, for basic blocks with more
> instructions than inc_threshold. The -machine-combiner-inc-threshold
> option can be used to set the threshold and allows for easier
> experimenting and checking if using incremental updates for all basic
> blocks has any impact on the performance.
>
> Reviewers: sanjoy, Gerolf, MatzeB, efriedma, fhahn
>
> Reviewed By: fhahn
>
> Subscribers: kiranchandramohan, javed.absar, efriedma, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D36619
llvm-svn: 313213
MachineScheduler when clustering loads or stores checks if base
pointers point to the same memory. This check is done through
comparison of base registers of two memory instructions. This
works fine when instructions have separate offset operand. If
they require a full calculated pointer such instructions can
never be clustered according to such logic.
Changed shouldClusterMemOps to accept base registers as well and
let it decide what to do about it.
Differential Revision: https://reviews.llvm.org/D37698
llvm-svn: 313208
Previously we used a size of '1' for VLAs because we weren't sure what
MSVC did. However, MSVC does support declaring an array without a size,
for which it emits an array type with a size of zero. Clang emits the
same DI metadata for VLAs and arrays without bound, so we would describe
arrays without bound as having one element. This lead to Microsoft
debuggers only printing a single element.
Emitting a size of zero appears to cause these debuggers to search the
symbol information to find a definition of the variable with accurate
array bounds.
Fixes http://crbug.com/763580
llvm-svn: 313203
This is to fix PR34502. After rL311401, the live range of spilled vreg will be
cleared. HoistSpill need to use the live range of the original vreg before splitting
to know the moving range of the spills. The patch saves a copy of live interval for
the spilled vreg inside of HoistSpillHelper.
Differential Revision: https://reviews.llvm.org/D37578
llvm-svn: 313197
Summary:
To improve CodeView quality for static member functions, we need to make the
static explicit. In addition to a small change in LLVM's CodeViewDebug to
return the appropriate MethodKind, this requires a small change in Clang to
note the staticness in the debug info metadata.
Subscribers: aprantl, hiraditya
Differential Revision: https://reviews.llvm.org/D37715
llvm-svn: 313192
This flag is unnecessary for testing because we can get the coverage
we need by adjusting CU attributes.
Differential Revision: https://reviews.llvm.org/D37725
llvm-svn: 313079
Implementing this pass as a PowerPC specific pass. Branch coalescing utilizes
the analyzeBranch method which currently does not include any implicit operands.
This is not an issue on PPC but must be handled on other targets.
Pass is currently off by default. Enabled via -enable-ppc-branch-coalesce.
Differential Revision : https: // reviews.llvm.org/D32776
llvm-svn: 313061
Looks like these were copied from the ELF sections but
don't apply to Wasm and were not used anywhere.
Also remove unused Wasm methods in MCContext.
Differential Revision: https://reviews.llvm.org/D37633
llvm-svn: 313058
A prologue-end line record is emitted with an incorrect associated address,
which causes a debugger to show the beginning of function body to be inside
the prologue.
Patch written by Carlos Alberto Enciso.
Differential Revision: https://reviews.llvm.org/D37625
llvm-svn: 313047
Summary:
GEP merging can sometimes increase the number of live values and register
pressure across control edges and cause performance problems particularly if the
increased register pressure results in spills.
This change implements GEP unmerging around an IndirectBr in certain cases to
mitigate the issue. This is in the CodeGenPrepare pass (after all the GEP
merging has happened.)
With this patch, the Python interpreter loop runs faster by ~5%.
Reviewers: sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: eastig, junbuml, llvm-commits
Differential Revision: https://reviews.llvm.org/D36772
llvm-svn: 312930
After the split of the Scatter operation, the order of the new instructions is well defined - Lo goes before Hi. Otherwise the semantic of Scatter (from LSB to MSB) is broken.
I'm chaining 2 nodes to prevent reordering.
Differential Revision https://reviews.llvm.org/D37670
llvm-svn: 312894
- Use range based for
- Variable names should start with upper case
- Add `const`
- Change class name to match filename
- Fix doxygen comments
- Use MCPhysReg instead of unsigned
- Use references instead of pointers where things cannot be nullptr
- Misc coding style improvements
llvm-svn: 312846
rL312641 Allowed llvm.memcpy/memset/memmove to be tail calls when parent
function return the intrinsics's first argument. However on arm-none-eabi
platform, llvm.memcpy will be expanded to __aeabi_memcpy which doesn't
have return value. The fix is to check the libcall name after expansion
to match "memcpy/memset/memmove" before allowing those intrinsic to be
tail calls.
llvm-svn: 312799
