Summary:
The -fxray-always-emit-customevents flag instructs clang to always emit
the LLVM IR for calls to the `__xray_customevent(...)` built-in
function. The default behaviour currently respects whether the function
has an `[[clang::xray_never_instrument]]` attribute, and thus not lower
the appropriate IR code for the custom event built-in.
This change allows users calling through to the
`__xray_customevent(...)` built-in to always see those calls lowered to
the corresponding LLVM IR to lay down instrumentation points for these
custom event calls.
Using this flag enables us to emit even just the user-provided custom
events even while never instrumenting the start/end of the function
where they appear. This is useful in cases where "phase markers" using
__xray_customevent(...) can have very few instructions, must never be
instrumented when entered/exited.
Reviewers: rnk, dblaikie, kpw
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D40601
llvm-svn: 319388
This is a re-apply of r319294.
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
-fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319297
adds -fseh-exceptions and -fdwarf-exceptions flags
clang will check if the user has specified an exception model flag,
in the absense of specifying the exception model clang will then check
the driver default and append the model flag for that target to cc1
clang cc1 assumes dwarf is the default if none is passed
and -fno-exceptions has a higher priority then specifying the model
move __SEH__ macro definitions out of Targets into InitPreprocessor
behind the -fseh-exceptions flag
move __ARM_DWARF_EH__ macrodefinitions out of verious targets and into
InitPreprocessor behind the -fdwarf-exceptions flag and arm|thumb check
remove unused USESEHExceptions from the MinGW Driver
fold USESjLjExceptions into a new GetExceptionModel function that
gives the toolchain classes more flexibility with eh models
Reviewers: rnk, mstorsjo
Differential Revision: https://reviews.llvm.org/D39673
llvm-svn: 319294
This is an instrumentation flag that's similar to
-finstrument-functions, but it only inserts calls on function entry, the
calls are inserted post-inlining, and they don't take any arugments.
This is intended for users who want to instrument function entry with
minimal overhead.
(-pg would be another alternative, but forces frame pointer emission and
affects link flags, so is probably best left alone to be used for
generating gcov data.)
Differential revision: https://reviews.llvm.org/D40276
llvm-svn: 318785
As reported in llvm bugzilla 32377.
Here’s a patch to add preinclude of stdc-predef.h.
The gcc documentation says “On GNU/Linux, <stdc-predef.h> is pre-included.”
See https://gcc.gnu.org/gcc-4.8/porting_to.html;
The preinclude is inhibited with –ffreestanding.
Basically I fixed the failing test cases by adding –ffreestanding which inhibits
this behavior.
I fixed all the failing tests, including some in extra/test, there's a separate
patch for that which is linked here
Patch By: mibintc
Differential Revision: https://reviews.llvm.org/D34158
llvm-svn: 318669
This updates -mcount to use the new attribute names (LLVM r318195), and
switches over -finstrument-functions to also use these attributes rather
than inserting instrumentation in the frontend.
It also adds a new flag, -finstrument-functions-after-inlining, which
makes the cygprofile instrumentation get inserted after inlining rather
than before.
Differential Revision: https://reviews.llvm.org/D39331
llvm-svn: 318199
Added support for regcall as default calling convention. Also added code to
exclude main when applying default calling conventions.
Patch-By: eandrews
Differential Revision: https://reviews.llvm.org/D39210
llvm-svn: 317268
Summary:
This change allows generalizing pointers in type signatures used for
cfi-icall by enabling the -fsanitize-cfi-icall-generalize-pointers flag.
This works by 1) emitting an additional generalized type signature
metadata node for functions and 2) llvm.type.test()ing for the
generalized type for translation units with the flag specified.
This flag is incompatible with -fsanitize-cfi-cross-dso because it would
require emitting twice as many type hashes which would increase artifact
size.
Reviewers: pcc, eugenis
Reviewed By: pcc
Subscribers: kcc
Differential Revision: https://reviews.llvm.org/D39358
llvm-svn: 317044
GCC tries to shorten system headers in depfiles using its real path
(resolving components like ".." and following symlinks). Mimic this
feature to ensure that the Ninja build tool detects the correct
dependencies when a symlink changes directory levels, see
https://github.com/ninja-build/ninja/issues/1330
An option to disable this feature is added in case "these changed header
paths may conflict with some compilation environments", see
https://gcc.gnu.org/ml/gcc-patches/2012-09/msg00287.html
Note that the original feature request for GCC
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=52974) also included paths
preprocessed output (-E) and diagnostics. That is not implemented now
since I am not sure if it breaks something else.
Differential Revision: https://reviews.llvm.org/D37954
llvm-svn: 316193
Currently all the consecutive bitfields are wrapped as a large integer unless there is unamed zero sized bitfield in between. The patch provides an alternative manner which makes the bitfield to be accessed as separate memory location if it has legal integer width and is naturally aligned. Such separate bitfield may split the original consecutive bitfields into subgroups of consecutive bitfields, and each subgroup will be wrapped as an integer. Now This is all controlled by an option -ffine-grained-bitfield-accesses. The alternative of bitfield access manner can improve the access efficiency of those bitfields with legal width and being aligned, but may reduce the chance of load/store combining of other bitfields, so it depends on how the bitfields are defined and actually accessed to choose when to use the option. For now the option is off by default.
Differential revision: https://reviews.llvm.org/D36562
llvm-svn: 315915
Move the logic for determining the `wchar_t` type information into the
driver. Rather than passing the single bit of information of
`-fshort-wchar` indicate to the frontend the desired type of `wchar_t`
through a new `-cc1` option of `-fwchar-type` and indicate the
signedness through `-f{,no-}signed-wchar`. This replicates the current
logic which was spread throughout Basic into the
`RenderCharacterOptions`.
Most of the changes to the tests are to ensure that the frontend uses
the correct type. Add a new test set under `test/Driver/wchar_t.c` to
ensure that we calculate the proper types for the various cases.
llvm-svn: 315126
to have child entries describing the template parameters. This will
be on by default for SCE tuning.
Differential Revision: https://reviews.llvm.org/D14358
llvm-svn: 314444
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312220
Extend the -fmodule-file option to support the [<name>=]<file> value format.
If the name is omitted, then the old semantics is preserved (the module file
is loaded whether needed or not). If the name is specified, then the mapping
is treated as just another prebuilt module search mechanism, similar to
-fprebuilt-module-path, and the module file is only loaded if actually used
(e.g., via import). With one exception: this mapping also overrides module
file references embedded in other modules (which can be useful if module files
are moved/renamed as often happens during remote compilation).
This override semantics requires some extra work: we now store the module name
in addition to the file name in the serialized AST representation.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D35020
llvm-svn: 312105
Summary:
An implementation of ubsan runtime library suitable for use in production.
Minimal attack surface.
* No stack traces.
* Definitely no C++ demangling.
* No UBSAN_OPTIONS=log_file=/path (very suid-unfriendly). And no UBSAN_OPTIONS in general.
* as simple as possible
Minimal CPU and RAM overhead.
* Source locations unnecessary in the presence of (split) debug info.
* Values and types (as in A+B overflows T) can be reconstructed from register/stack dumps, once you know what type of error you are looking at.
* above two items save 3% binary size.
When UBSan is used with -ftrap-function=abort, sometimes it is hard to reason about failures. This library replaces abort with a slightly more informative message without much extra overhead. Since ubsan interface in not stable, this code must reside in compiler-rt.
Reviewers: pcc, kcc
Subscribers: srhines, mgorny, aprantl, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D36810
llvm-svn: 312029
This patch adds a flag -fclang-abi-compat that can be used to request that
Clang attempts to be ABI-compatible with some older version of itself.
This is provided on a best-effort basis; right now, this can be used to undo
the ABI change in r310401, reverting Clang to its prior C++ ABI for pass/return
by value of class types affected by that change, and to undo the ABI change in
r262688, reverting Clang to using integer registers rather than SSE registers
for passing <1 x long long> vectors. The intent is that we will maintain this
backwards compatibility path as we make ABI-breaking fixes in future.
The reversion to the old behavior for r310401 is also applied to the PS4 target
since that change is not part of its platform ABI (which is essentially to do
whatever Clang 3.2 did).
llvm-svn: 311823
Summary: With accurate sample profile, we can do more aggressive size optimization. For some size-critical application, this can reduce the text size by 20%
Reviewers: davidxl, rsmith
Reviewed By: davidxl, rsmith
Subscribers: mehdi_amini, eraman, sanjoy, cfe-commits
Differential Revision: https://reviews.llvm.org/D37091
llvm-svn: 311707
Summary:
Augment SanitizerCoverage to insert maximum stack depth tracing for
use by libFuzzer. The new instrumentation is enabled by the flag
-fsanitize-coverage=stack-depth and is compatible with the existing
trace-pc-guard coverage. The user must also declare the following
global variable in their code:
thread_local uintptr_t __sancov_lowest_stack
https://bugs.llvm.org/show_bug.cgi?id=33857
Reviewers: vitalybuka, kcc
Reviewed By: vitalybuka
Subscribers: kubamracek, hiraditya, cfe-commits, llvm-commits
Differential Revision: https://reviews.llvm.org/D36839
llvm-svn: 311186
This option when combined with -mgpopt and -membedded-data places all
uninitialized constant variables in the read-only section.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D35917
llvm-svn: 309940
Summary:
Changed EABIVersion type from string to llvm::EABI.
It seems it was just a typo and this is intended implementation.
Differential Revision: https://reviews.llvm.org/D34595
llvm-svn: 306953
Summary:
Un-revert https://reviews.llvm.org/D34868, but with a slight tweak to the
documentation to fix an error -- I had used the wrong syntax for a link.
llvm-svn: 306948
Summary:
Depends on https://reviews.llvm.org/D34867.
Add a Clang frontend option to enable optimization remark hotness
thresholds, which were added to LLVM in https://reviews.llvm.org/D34867.
This prevents diagnostics that do not meet a minimum hotness
threshold from being output. When generating optimization remarks for large
codebases with a ton of cold code paths, this option can be used
to limit the optimization remark output at a reasonable size.
Discussion of this change can be read here:
http://lists.llvm.org/pipermail/llvm-dev/2017-June/114377.html
Reviewers: anemet, davidxl, hfinkel
Reviewed By: anemet
Subscribers: fhahn, cfe-commits
Differential Revision: https://reviews.llvm.org/D34868
llvm-svn: 306945
basic block vectorizer. This vectorizer has had no known users for many,
many years and is completely surpassed by the normal
'-fvectorize-slp'-controlled SLP vectorizer in LLVM.
Hal proposed this back in 2014 to no objections:
http://lists.llvm.org/pipermail/llvm-dev/2014-November/079091.html
While this patch completely removes the flag, Joerg is working on
a patch that will add it back in a way that warns users and ignores the
flag in a clear and well factored way (so that we can keep doing this
going forward).
Differential Revision: https://reviews.llvm.org/D34846
llvm-svn: 306786
a c++17 aligned allocation/deallocation function that is unavailable in
the standard library on Apple platforms.
The aligned functions are implemented only in the following versions or
later versions of the OSes, so clang issues diagnostics if the deployment
target being targeted is older than these:
macosx: 10.13
ios: 11.0
tvos: 11.0
watchos: 4.0
The diagnostics are issued whenever the aligned functions are selected
except when the selected function has a definition in the same file.
If there is a user-defined function available somewhere else, option
-Wno-aligned-allocation-unavailable can be used to silence the
diagnostics.
rdar://problem/32664169
Differential Revision: https://reviews.llvm.org/D34574
llvm-svn: 306722
Summary: Device offloading requires the specification of an additional flag containing the triple of the //other// architecture the code is being compiled on if such an architecture exists. If compiling for the host, the auxiliary triple flag will contain the triple describing the device and vice versa.
Reviewers: arpith-jacob, sfantao, caomhin, carlo.bertolli, ABataev, Hahnfeld, jlebar, hfinkel, tstellar
Reviewed By: Hahnfeld
Subscribers: rengolin, cfe-commits
Differential Revision: https://reviews.llvm.org/D29339
llvm-svn: 306689
Restore the `-gz` option to the driver with some minor tweaks to handle
the additional case for `-Wa,--compress-debug-sections`.
This intends to make the compression of the debug information
controllable from the driver. The following is the behaviour:
-gz enable compression (ambiguous for format, will default to zlib-gnu)
-gz=none disable compression
-gz=zlib-gnu enable compression (deprecated GNU style zlib compression)
-gz=zlib enable compression (zlib based compression)
Although -Wa,-compress-debug-sections works, it should be discouraged
when using the driver to invoke the assembler. However, we permit the
assembler to accept the GNU as style argument --compress-debug-sections
to maintain compatibility.
Note, -gz/-gz= does *NOT* imply -g. That is, you need to additionally
specific -g for debug information to be generated.
llvm-svn: 306115
Summary:
Prior to this change, using `-fdiagnostics-show-hotness` with a sampling
profile specified via `-fprofile-sample-use=` would result in the Clang
frontend emitting a warning: "argument '-fdiagnostics-show-hotness' requires
profile-guided optimization information". Of course, a sampling profile
*is* profile-guided optimization information, so the warning is misleading.
Furthermore, despite the warning, hotness was displayed based on the data in
the sampling profile.
Prevent the warning from being emitted when a sampling profile is used, and
add a test that verifies this.
Reviewers: anemet, davidxl
Reviewed By: davidxl
Subscribers: danielcdh, cfe-commits
Differential Revision: https://reviews.llvm.org/D34082
llvm-svn: 306079
for preprocessing
r300667 added support for editor placeholder to Clang. That commit didn’t take
into account that users who use Clang for preprocessing only (-E) will get the
"editor placeholder in source file" error when preprocessing their source
(PR33394). This commit ensures that Clang doesn't lex editor placeholders when
running a preprocessor only action.
rdar://32718000
Differential Revision: https://reviews.llvm.org/D34256
llvm-svn: 305576
Summary:
It seems -flto must be either "thin" or "full". I think the use of
containValue is just a typo.
Reviewers: ruiu, tejohnson
Subscribers: mehdi_amini, inglorion
Differential Revision: https://reviews.llvm.org/D34055
llvm-svn: 305392
cc1as does not currently access the "--" version of this flag. At the
very least this needs to be fixed and proper test cases need to be
added.
Simple reproducer:
clang -Wa,--compress-debug-sections /tmp/test.cc
Result:
error: unknown argument: '--compress-debug-sections'
llvm-svn: 305182
These options control the behaviour of the compression of debug info
sections on ELF targets. Our behaviour slightly diverges from the
behaviour of GCC. `-gz` maps to the `-compress-debug-sections` rather
than `-compress-debug-sections=zlib` or
`-compress-debug-sections=zlib-gnu`. This small divergence allows us to
be compatible across versions of binutils (=zlib support was introduced
in 2.26, while earlier versions only support =zlib-gnu). This also
allows users to not have to worry about the version of the assembler
they may be using if they are not using the IAS. Previously, users
would have had to go through the internal option
`-compress-debug-sectionss` and pass that through to the assembler,
which is no longer needed.
llvm-svn: 305165
If specified, when preprocessing, the contents of imported .pcm files will be
included in preprocessed output. The resulting preprocessed file can then be
compiled standalone without the module sources or .pcm files.
llvm-svn: 305116
