This tries to fix all of the places where a diagnostic message starts
with a capital letter (other than acroynyms or proper nouns) or ends
with punctuation (other than a question mark).
This is in support of a planned change to tablegen to start diagnosing
incorrect diagnostic message styles.
The default version of OpenMP is updated from 5.0 to 5.1 which means if -fopenmp is specified but -fopenmp-version is not specified with clang, the default version of OpenMP is taken to be 5.1. After modifying the Frontend for that, various LIT tests were updated. This patch contains all such changes. At a high level, these are the patterns of changes observed in LIT tests -
# RUN lines which mentioned `-fopenmp-version=50` need to kept only if the IR for version 5.0 and 5.1 are different. Otherwise only one RUN line with no version info(i.e. default version) needs to be there.
# Test cases of this sort already had the RUN lines with respect to the older default version 5.0 and the version 5.1. Only swapping the version specification flag `-fopenmp-version` from newer version RUN line to older version RUN line is required.
# Diagnostics: Remove the 5.0 version specific RUN lines if there was no difference in the Diagnostics messages with respect to the default 5.1.
# Diagnostics: In case there was any difference in diagnostics messages between 5.0 and 5.1, mention version specific messages in tests.
# If the test contained version specific ifdef's e.g. "#ifdef OMP5" but there were no RUN lines for any other version than 5.X, then bring the code guarded by ifdef's outside and remove the ifdef's.
# Some tests had RUN lines for both 5.0 and 5.1 versions, but it is found that the IR for 5.0 is not different from the 5.1, therefore such RUN lines are redundant. So, such duplicated lines are removed.
# To generate CHECK lines automatically, use the script llvm/utils/update_cc_test_checks.py
Reviewed By: saiislam, ABataev
Differential Revision: https://reviews.llvm.org/D129635
(cherry picked from commit 9dd2999907dc791136a75238a6000f69bf67cf4e)
During the ISO C++ Committee meeting plenary session the C++23 Standard
has been voted as technical complete.
This updates the reference to c++2b to c++23 and updates the __cplusplus
macro.
Drive-by fixes c++1z -> c++17 and c++2a -> c++20 when seen.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D149553
With the addition of `__attribute__((visibility("hidden")))` to the test, the test fails because AIX's current default behaviour is to ignore hidden visibility, so the expected error is not seen. This patch marks the test `XFAIL` on AIX for now.
Reviewed By: cebowleratibm
Differential Revision: https://reviews.llvm.org/D122519
A previous patch removed the compiler generating offloading entries
for variables that were declared on the device but were internal or
hidden. This allowed us to compile programs but turns any attempt to run
'#pragma omp target update' on one of those variables a silent failure.
This patch adds a check in the semantic analysis for if the user is
attempting the update a variable on the device from the host that is not
externally visible.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D122403
Implement P2128R6 in C++23 mode.
Unlike GCC's implementation, this doesn't try to recover when a user
meant to use a comma expression.
Because the syntax changes meaning in C++23, the patch is *NOT*
implemented as an extension. Instead, declaring an array with not
exactly 1 parameter is an error in older languages modes. There is an
off-by-default extension warning in C++23 mode.
Unlike the standard, we supports default arguments;
Ie, we assume, based on conversations in WG21, that the proposed
resolution to CWG2507 will be accepted.
We allow arrays OpenMP sections and C++23 multidimensional array to
coexist:
[a , b] multi dimensional array
[a : b] open mp section
[a, b: c] // error
The rest of the patch is relatively straight forward: we take care to
support an arbitrary number of arguments everywhere.
where should not.
Currently we are using QTy->isIncompleteType(&ND) to check incomplete
type. But before doing that, need to instantiate for a class template
specialization or a class member of a class template specialization,
or an array with known size of such..., so that we know it is really
incomplete type.
To fix this using RequireCompleteType instead.
The new test is added into "test/OpenMP/target_update_messages.cpp"
The different of using RequireCompleteType is when emit incomplete type,
an additional note is also emitted to point to where incomplete type
is declared. Because this change, many tests are needed to be fixed
by adding additional note.
This is to fix https://bugs.llvm.org/show_bug.cgi?id=50508
Differential Revision: https://reviews.llvm.org/D107200
In order not to modify the `tgt_target_data_update` information but still be
able to pass the extra information for non-contiguous map item (offset,
count, and stride for each dimension), this patch overload `arg` when
the maptype is set as `OMP_MAP_DESCRIPTOR`. The origin `arg` is for
passing the pointer information, however, the overloaded `arg` is an
array of descriptor_dim:
struct descriptor_dim {
int64_t offset;
int64_t count;
int64_t stride
};
and the array size is the same as dimension size. In addition, since we
have count and stride information in descriptor_dim, we can replace/overload the
`arg_size` parameter by using dimension size.
For supporting `stride` in array section, we use a dummy dimension in
descriptor to store the unit size. The formula for counting the stride
in dimension D_n: `unit size * (D_0 * D_1 ... * D_n-1) * D_n.stride`.
Demonstrate how it works:
```
double arr[3][4][5];
D0: { offset = 0, count = 1, stride = 8 } // offset, count, dimension size always be 0, 1, 1 for this extra dimension, stride is the unit size
D1: { offset = 0, count = 2, stride = 8 * 1 * 2 = 16 } // stride = unit size * (product of dimension size of D0) * D1.stride = 4 * 1 * 2 = 8
D2: { offset = 2, count = 2, stride = 8 * (1 * 5) * 1 = 40 } // stride = unit size * (product of dimension size of D0, D1) * D2.stride = 4 * 5 * 1 = 20
D3: { offset = 0, count = 2, stride = 8 * (1 * 5 * 4) * 2 = 320 } // stride = unit size * (product of dimension size of D0, D1, D2) * D3.stride = 4 * 25 * 2 = 200
// X here means we need to offload this data, therefore, runtime will transfer
// data from offset 80, 96, 120, 136, 400, 416, 440, 456
// Runtime patch: https://reviews.llvm.org/D82245
// OOOOO OOOOO OOOOO
// OOOOO OOOOO OOOOO
// XOXOO OOOOO XOXOO
// XOXOO OOOOO XOXOO
```
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84192
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D84711
Summary:
Some OpenMP clauses rely on the values of the variables. If the variable
is not initialized and used in OpenMP clauses that depend on the
variables values, it should be reported that the uninitialized variable
is used in the OpenMP clause expression.
This patch adds initial processing for uninitialized variables in OpenMP
constructs. Currently, it checks for use of the uninitialized variables
in the structured blocks.
Reviewers: NoQ, Szelethus, dcoughlin, xazax.hun, a.sidorin, george.karpenkov, szepet
Subscribers: rnkovacs, guansong, jfb, jdoerfert, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D64356
llvm-svn: 365786
only.
Added support for -fopenmp-simd option that allows compilation of
simd-based constructs without emission of OpenMP runtime calls.
llvm-svn: 321560
Summary:
The patch contains the parsing and sema support for the `from` clause.
Patch based on the original post by Kelvin Li.
Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D18488
llvm-svn: 270882
Summary:
The patch contains the parsing and sema support for the `to` clause.
Patch based on the original post by Kelvin Li.
Reviewers: carlo.bertolli, hfinkel, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D18597
llvm-svn: 270880
Summary:
This patch is to add parsing and sema support for `target update` directive. Support for the `to` and `from` clauses will be added by a different patch. This patch also adds support for other clauses that are already implemented upstream and apply to `target update`, e.g. `device` and `if`.
This patch is based on the original post by Kelvin Li.
Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev
Subscribers: caomhin, cfe-commits
Differential Revision: http://reviews.llvm.org/D15944
llvm-svn: 270878
