r290874 enabled the s390x test, which caused the rest of the tests to start
misbehaving. This is because this test switches the selected platform and the
change persists.
This fixes it by explicitly resetting the platform in a similar way to the gcore
tests do. Potentially we should consider re-setting the platform globally
between each test run to better protect tests from each other.
llvm-svn: 290890
Summary:
This patch changes and simplifies the way notes are read from Linux Elf cores.
The current implementation copies the bytes from the notes directly over the lldb structure for 64 bit cores and reads field by field for 32 bit cores. Reading the bytes directly only works if the endianess of the core dump and the platform that lldb are running on matches. The case statements for s390x and x86_64 would would only work on big endian systems and little endian systems respectively. That meant that x86_64 generally worked but s390x didn't unless you were on s390x or another big endian platform.
This patch just reads field by field on all platform and updates the field by field version to allow for those fields which are word size instead of fixed size. It should also slightly simplify adding support for a new Linux platform.
This patch also re-enables the s390x test case in TestLinuxCore.py on all non-s390x platforms as it now passes.
Reviewers: uweigand, clayborg
Differential Revision: https://reviews.llvm.org/D27571
llvm-svn: 290874
Fixed by additional completed plans detection, and applying them on breakpoint condition fail.
Thread::GetStopInfo reworked. New test added.
Review https://reviews.llvm.org/D26497
Many thanks to Jim
llvm-svn: 290168
This test passes consistently on linux, so I am removing the overall XFAIL. If it
fails on your configuration, please put a targeted xfail instead (i'll add them
my self if I get any breakage emails).
llvm-svn: 287881
Summary:
This patch changes the way ProcessElfCore.cpp handles signal information.
The patch changes ProcessElfCore.cpp to use the signal from si_signo in SIGINFO notes in preference to the value of cursig in PRSTATUS notes. The value from SIGINFO seems to be more thread specific. The value from PRSTATUS is usually the same for all threads even if only one thread received a signal.
If it cannot find any SIGINFO blocks it reverts to the old behaviour and uses the value from cursig in PRSTATUS. If after that no thread appears to have been stopped it forces the status of the first thread to be SIGSTOP to prevent lldb hanging waiting for any thread from the core file to change state.
The order is:
- If one or more threads have a non-zero si_signo in SIGINFO that will be used.
- If no threads had a SIGINFO block with a non-zero si_signo set all threads signals to the value in cursig in their PRSTATUS notes.
- If no thread has a signal set to a non-zero value set the signal for only the first thread to SIGSTOP.
This resolves two issues. The first was identified in bug 26322, the second became apparent while investigating this problem and looking at the signal values reported for each thread via “thread list”.
Firstly lldb is able to load core dumps generated by gcore where each thread has a SIGINFO note containing a signal number but cursig in the PRSTATUS block for each thread is 0.
Secondly if a SIGINFO note was found the “thread list” command will no longer show the same signal number for all threads. At the moment if a process crashes, for example with SIGILL, all threads will show “stop reason = signal SIGILL”. With this patch only the thread that executed the illegal instruction shows that stop reason. The other threads show “stop reason = signal 0”.
Reviewers: jingham, clayborg
Subscribers: sas, labath, lldb-commits
Differential Revision: https://reviews.llvm.org/D26676
llvm-svn: 287858
Summary:
The floating-point and SSE registers could be present in the elf-core
file in the note NT_FPREGSET for 64 bit ones, and in the note
NT_PRXFPREG for 32 bit ones.
The entire note is a binary blob matching the layout of the x87 save
area that gets generated by the FXSAVE instruction (see Intel developers
manual for more information).
This CL mainly modifies the RegisterRead function in
RegisterContextPOSIXCore_x86_64 for it to return the correct data both
for GPR and FPR/SSE registers, and return false (meaning "this register
is not available") for other registers.
I added a test to TestElfCore.py that tests reading FPR/SSE registers
both from a 32 and 64 bit elf-core file and I have inluded the source
which I used to generate the core files.
I tried to also add support for the AVX registers, because this info could
also be present in the elf-core file (note NT_X86_XSTATE - that is the result of
the newer XSAVE instruction). Parsing the contents from the file is
easy. The problem is that the ymm registers are split into two halves
and they are in different places in the note. For making this work one
would either make a "hacky" approach, because there won't be
any other way with the current state of the register contexts - they
assume that "this register is of size N and at offset M" and
don't have the notion of discontinuos registers.
Reviewers: labath
Subscribers: emaste, lldb-commits
Differential Revision: https://reviews.llvm.org/D26300
llvm-svn: 287506
On Windows, where we use Python 3 for testing, we have to be more explicit about converting between binary and string representations. I believe this should still work for Python 2, but I don't have a convenient way to try it out.
Differential Revision: https://reviews.llvm.org/D26643
llvm-svn: 286909
Summary: This patch reworks all the @skip... lines for sanitizer libraries to be based on whether or not the compiler actually works, rather than whether or not the compiler-rt sources are present in some magically derived directory.
Reviewers: lldb-commits
Subscribers: kubabrecka, tfiala
Differential Revision: https://reviews.llvm.org/D26513
llvm-svn: 286490
Summary:
r284830 added a summary provider for unique_ptr in libstdc++, whose value printed
the value of the pointee. This is a bit unintuitive as it becomes unobvious that
the value actually is a pointer, and we lose the way to actually obtain the
pointer value.
Change that to print the pointer value instead. The pointee value can still be
obtained through the synthetic children.
Reviewers: tberghammer, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D26403
llvm-svn: 286355
Summary:
This commit disables the windows-only minidump plugin and enables the new
cross-platform plugin for windows minidump files. Test decorators are adjusted to
reflect that: windows minidump tests can now run on all platforms. The exception
is the tests that create minidump files, as that functionality is not available
yet. I've checked that this works on windows and linux.
Reviewers: amccarth, zturner
Subscribers: dvlahovski, lldb-commits
Differential Revision: https://reviews.llvm.org/D26393
llvm-svn: 286352
I added a "thread-stop-format" to distinguish between the form
that is just the thread info (since the stop printing immediately prints
the frame info) and one with more frame 0 info - which is useful for
"thread list" and the like.
I also added a frame.no-debug boolean to the format entities so you can
print frame information differently between frames with source info and those
without.
This closes https://reviews.llvm.org/D26383.
<rdar://problem/28273697>
llvm-svn: 286288
This renames the functionalities/postmortem/linux-core to elf-core and puts the
"linux" part into the individual names of the core files. Since the tests for
linux and freebsd core files are going to be very similar, having them close
together means they can reuse most of the plumbing.
llvm-svn: 286101
Summary:
This patch contains test for reading YMM Registers. The test basically
contains an inferior that loads the ymm registers with a bit pattern
and the python test executes register read to check if the bit pattern
is correctly written in the registers. This test is repeated twice for
each register with a different pattern for better sanity.
Reviewers: tberghammer, zturner, clayborg
Subscribers: tberghammer, danalbert, srhines
Differential Revision: https://reviews.llvm.org/D26242
llvm-svn: 285885
We really shouldn't be sending events for SB API's, dunno when we started
doing that. We don't do it for other things. But first restore the status quo.
llvm-svn: 285781
We don't have a good story for what happens to watchpoints when you don't
have a process, or if your process exits. Clearing that up will instruct
how to fix this for real.
Also added a test to make sure disable->enable works as well.
This resolves llvm.org/pr30789.
llvm-svn: 285742
Summary:
One of the tests was flaky, because similarly to
https://reviews.llvm.org/D18697 (rL265391) - if there is a process running
which is with the same PID as in the core file, the minidump
core file debugging will fail, because we get some information from the
running process.
The fix is routing the ProcessInfo requests through the Process class
and overriding it in ProcessMinidump to return correct data.
Reviewers: labath
Subscribers: lldb-commits, beanz
Differential Revision: https://reviews.llvm.org/D26193
llvm-svn: 285698
Summary:
This plugin resembles the already existing Windows-only Minidump plugin.
The WinMinidumpPlugin uses the Windows API for parsing Minidumps
while this plugin is cross-platform because it includes a Minidump
parser (which is already commited)
It is able to produce a backtrace, to read the general puprose regiters,
inspect local variables, show image list, do memory reads, etc.
For now the only arches that this supports are x86_32 and x86_64.
This is because I have only written register contexts for those.
Others will come in next CLs.
I copied the WinMinidump tests and adapted them a little bit for them to
work with the new plugin (and they pass)
I will add more tests, aiming for better code coverage.
There is still functionality to be added, see TODOs in code.
Reviewers: labath, zturner
Subscribers: beanz, mgorny, modocache, lldb-commits, amccarth
Differential Revision: https://reviews.llvm.org/D25905
llvm-svn: 285587
Summary:
Convert tests using LLDB headers to use generateSource to put the right include paths in place regardless of whether or not you're building a framework.
This also abstracted generateSource out of TestPublicAPIHeaders.py into lldbtest.py.
Reviewers: tfiala, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25887
llvm-svn: 285542
This reverts commit r285357.
I committed this patch accidentally out of order. Will recommit when the change this depends on is landed.
llvm-svn: 285361
Summary:
Convert tests using LLDB headers to use generateSource to put the right include paths in place regardless of whether or not you're building a framework.
This also abstracted generateSource out of TestPublicAPIHeaders.py into lldbtest.py.
Reviewers: tfiala, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D25887
llvm-svn: 285357
Summary:
Check whether the setting the breakpoint failed during instruction emulation. If
it did, the next pc is likely in unmapped memory, and the inferior will crash
anyway after the next instruction. Do not return an error in this case, but just
continue stepping.
Reenabled the crash during step test for android/linux.
Reviewers: labath
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D25926
Author: Jason Majors <jmajors@google.com>
llvm-svn: 285187
Otherwise, they tend to generate filename too long errors.
They already contain the same test name in the directory, file, and class names,
so no information is really lost here.
llvm-svn: 284987
* Display the strong/weak count in the summary
* Display the pointed object as a synthetic member
* Create synthetic children for weak/strong count
Differential revision: https://reviews.llvm.org/D25726
llvm-svn: 284828
This tests that lldb handles the situation when a single instruction triggers
multiple watchpoint hits. It currently fails on arm due to what appears to be a
lldb-server bug (pr30758).
llvm-svn: 284819
This reverts commit r284795, as it breaks watchpoint handling on arm (and
presumable all architectures that report watchpoint hits without executing the
tripping instruction).
There seems to be something fundamentally wrong with this patch: it uses
process_sp->AddPreResumeAction to re-enable the watchpoint, but the whole point
of the step-over-watchpoint logic (which AFAIK is the only user of this class) is
to disable the watchpoint *after* we resume to do the single step.
I have no idea how to fix this except by reverting the offending patch.
llvm-svn: 284817
Also, watchpoint commands, like breakpoint commands, need to run in async mode.
This was causing intermittent failures in TestWatchpointCommandPython.py, which is now solid.
llvm-svn: 284795
by grubbing the break list output. If you pass a number of locations into
the run_break_* functions, they will check that this is right for you.
llvm-svn: 284791
This patch fixes ARM/AArch64 watchpoint bug which was taking inferior out of control while stepping over watchpoints.
Also adds a test case that tests above problem.
Differential revision: https://reviews.llvm.org/D25057
llvm-svn: 284706
