This is forcing to use Error::success(), which is in a wide majority
of cases a lot more readable.
Differential Revision: https://reviews.llvm.org/D26481
llvm-svn: 286561
This change is very mechanical. All it does is change the
signature of `Options::GetDefinitions()` and `OptionGroup::
GetDefinitions()` to return an `ArrayRef<OptionDefinition>`
instead of a `const OptionDefinition *`. In the case of the
former, it deletes the sentinel entry from every table, and
in the case of the latter, it removes the `GetNumDefinitions()`
method from the interface. These are no longer necessary as
`ArrayRef` carries its own length.
In the former case, iteration was done by using a sentinel
entry, so there was no knowledge of length. Because of this
the individual option tables were allowed to be defined below
the corresponding class (after all, only a pointer was needed).
Now, however, the length must be known at compile time to
construct the `ArrayRef`, and as a result it is necessary to
move every option table before its corresponding class. This
results in this CL looking very big, but in terms of substance
there is not much here.
Differential revision: https://reviews.llvm.org/D24834
llvm-svn: 282188
This patch also marks the const char* versions as =delete to prevent
their use. This has the potential to cause build breakages on some
platforms which I can't compile. I have tested on Windows, Linux,
and OSX. Best practices for fixing broken callsites are outlined in
Args.h in a comment above the deleted function declarations.
Eventually we can remove these =delete declarations, but for now they
are important to make sure that all implicit conversions from
const char * are manually audited to make sure that they do not invoke a
conversion from nullptr.
llvm-svn: 281919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
easier to scan a set of options with a relatively large number of positional
arguments. This commit standardizes their formatting throughout LLDB and
applies surrounding directives to exempt them from being formatted by
clang-format.
These kinds of exemptions should be rare cases that benefit significantly
from alternative formatting. They also imply a long-term obligation to
maintain their format since the automated tools will not do so.
llvm-svn: 279882
Options used to store a reference to the CommandInterpreter instance
in the base Options class. This made it impossible to parse options
independent of a CommandInterpreter.
This change removes the reference from the base class. Instead, it
modifies the options-parsing-related methods to take an
ExecutionContext pointer, which the options may inspect if they need
to do so.
Closes https://reviews.llvm.org/D23416
Reviewers: clayborg, jingham
llvm-svn: 278440
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
This allows expressions such as 'i == 1 || i == 2` to be executed using the IR interpreter, instead of relying on JIT code injection (which may not be available on some platforms).
Patch by cameron314
Differential Revision: http://reviews.llvm.org/D19124
llvm-svn: 269340
IOHandlerLinesUpdated() does nothing, and IOHandlerIsInputComplete should be
implemented but isn't. This means that multiline expressions don't work. This
patch fixes that. Test case to follow in the next commit.
llvm-svn: 268970
This option evaluates an expression and, if the result is of pointer type, treats it as if it was an array of that many elements and displays such elements
This has a couple subtle points but is mostly as straightforward as it sounds
Add a parray N <expr> alias for this new mode
Also, extend the --object-description mode to do the moral equivalent of the above but display each element in --object-description mode
Add a poarray N <expr> alias for this
llvm-svn: 267372
quietly apply fixits for those who really trust clang's fixits.
Also, moved the retry into ClangUserExpression::Evaluate, where I can make a whole new ClangUserExpression
to do the work. Reusing any of the parts of a UserExpression in situ isn't supported at present.
<rdar://problem/25351938>
llvm-svn: 264793
Top-level Clang expressions are expressions that act as new translation units,
and define their own symbols. They do not have function wrappers like regular
expressions do, and declarations are persistent regardless of use of the dollar
sign in identifiers. Names defined by these are given priority over all other
symbol lookups.
This patch adds a new expression option, '-p' or '--top-level,' which controls
whether the expression is treated this way. It also adds a flag controlling
this to SBExpressionOptions so that this API is usable externally. It also adds
a test that validates that this works. (The test requires a fix to the Clang
AST importer which I will be committing shortly.)
<rdar://problem/22864976>
llvm-svn: 264662
This feature is controlled by an expression command option, a target property and the
SBExpressionOptions setting. FixIt's are only applied to UserExpressions, not UtilityFunctions,
those you have to get right when you make them.
This is just a first stage. At present the fixits are applied silently. The next step
is to tell the user about the applied fixit.
<rdar://problem/25351938>
llvm-svn: 264379
"expr -r" does this. It also returns to a REPL if the LLDB command interpreter
is neseted inside it, for example in cases where a REPL command resulted in a
breakpoint being hit or a crash.
llvm-svn: 250780
When the target settings are consulted to decide the expression language
is decided in CommandObjectExpression, this doesn't help if you're running
SBFrame::EvaluateExpression(). Moving the logic into UserExpression fixes
this.
Based on patch from scallanan@apple.com
Reviewed by: dawn
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D13267
llvm-svn: 249624
Before we had:
ClangFunction
ClangUtilityFunction
ClangUserExpression
and code all over in lldb that explicitly made Clang-based expressions. This patch adds an Expression
base class, and three pure virtual implementations for the Expression kinds:
FunctionCaller
UtilityFunction
UserExpression
You can request one of these expression types from the Target using the Get<ExpressionType>ForLanguage.
The Target will then consult all the registered TypeSystem plugins, and if the type system that matches
the language can make an expression of that kind, it will do so and return it.
Because all of the real expression types need to communicate with their ExpressionParser in a uniform way,
I also added a ExpressionTypeSystemHelper class that expressions generically can vend, and a ClangExpressionHelper
that encapsulates the operations that the ClangExpressionParser needs to perform on the ClangExpression types.
Then each of the Clang* expression kinds constructs the appropriate helper to do what it needs.
The patch also fixes a wart in the UtilityFunction that to use it you had to create a parallel FunctionCaller
to actually call the function made by the UtilityFunction. Now the UtilityFunction can be asked to vend a
FunctionCaller that will run its function. This cleaned up a lot of boiler plate code using UtilityFunctions.
Note, in this patch all the expression types explicitly depend on the LLVM JIT and IR, and all the common
JIT running code is in the FunctionCaller etc base classes. At some point we could also abstract that dependency
but I don't see us adding another back end in the near term, so I'll leave that exercise till it is actually necessary.
llvm-svn: 247720
* Use the frame's context (instead of just the target's) when evaluating,
so that the language of the frame's CU can be used to select the
compiler and/or compiler options to use when parsing the expression.
This allows for modules built with mixed languages to be parsed in
the context of their frame.
* Add all C and C++ language variants when determining the language options
to set.
* Enable C++ language options when language is C or ObjC as a workaround since
the expression parser uses features of C++ to capture values.
* Enable ObjC language options when language is C++ as a workaround for ObjC
requirements.
* Disable C++11 language options when language is C++03.
* Add test TestMixedLanguages.py to check that the language being used
for evaluation is that of the frame.
* Fix test TestExprOptions.py to check for C++11 instead of C++ since C++ has
to be enabled for C, and remove redundant expr --language test for ObjC.
* Fix TestPersistentPtrUpdate.py to not require C++11 in C.
Reviewed by: clayborg, spyffe, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11102
llvm-svn: 246829
This is still something I need to fix, but at least it's not so ugly, and it's
consistent with the other code that does that so we will catch it when we purge
all such code.
llvm-svn: 246738
Clang-specific part, create the ExpressionVariable source/header file and
move ClangExpressionVariable into the Clang expression parser plugin.
It is expected that there are some ugly #include paths... these will be resolved
by either (1) making that code use generic expression variables (once they're
separated appropriately) or (2) moving that code into a plug-in, often
the expression parser plug-in.
llvm-svn: 246737
This patch adds the option -l/--language to the expression command, for
use when setting the language options or choosing an alternate FE. If
not specified, the target.language setting is used.
Reviewed by: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11447
llvm-svn: 243187
Existing commands supplying this type of help content have been reworked to take advantage of the changes. In addition to formatting changes, content was changes for accuracy and clarity purposes.
<rdar://problem/21269977>
llvm-svn: 242122
Since interaction with the python interpreter is moving towards
being more isolated, we won't be able to include this header from
normal files anymore, all includes of it should be localized to
the python library which will live under source/bindings/API/Python
after a future patch.
None of the files that were including this header actually depended
on it anyway, so it was just a dead include in every single instance.
llvm-svn: 238581
This works for Python commands defined via a class (implement get_flags on your class) and C++ plugin commands (which can call SBCommand::GetFlags()/SetFlags())
Flags allow features such as not letting the command run if there's no target, or if the process is not stopped, ...
Commands could always check for these things themselves, but having these accessible via flags makes custom commands more consistent with built-in ones
llvm-svn: 238286
Summary:
Presently Args::SetCommandString allows quotes to be escaped with backslash. However, the
backslash itself is not removed from the argument, nor there is a way to escape the backslash
itself. This leads to surprising results:
"a b" c" -> 'a b', 'c' # Here we actually have an unterminated quote, but that is ignored
"a b\" c" -> 'a b\" c' # We try to escape the quote. That works but the backslash is not removed.
"a b\\" c" -> 'a b\\" c' # Escaping the backslash has no effect.
This change changes quote handling to be more shell-like:
- single quotes and backquotes are literal and there is no way to escape the closing quote or
anything else inside;
- inside double quotes you can use backslash to escape the closing quote and another backslash
- outside any quotes, you can use backslash to escape quotes, spaces and itself.
This makes the parsing more consistent with what the user is familiar and increases the
probability that pasting the command line from shell to the "process launch" command "just work".
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7855
llvm-svn: 230955
The refactor was motivated by some comments that Greg made
http://reviews.llvm.org/D6918
and also to break a dependency cascade that caused functions linking
in string->int conversion functions to pull in most of lldb
llvm-svn: 226199
(e.g. breakpoints, stop-hooks) before we have any targets - for instance in
your ~/.lldbinit file. These will then get copied over to any new targets
that get created. So far, you can only make stop-hooks.
Breakpoints will have to learn to move themselves from target to target for
us to get them from no-target to new-target.
We should also make a command & SB API way to prime this ur-target.
llvm-svn: 222600
Improvements include:
* Use of libedit's wide character support, which is imperfect but a distinct improvement over ASCII-only
* Fallback for ASCII editing path
* Support for a "faint" prompt clearly distinguished from input
* Breaking lines and insert new lines in the middle of a batch by simply pressing return
* Joining lines with forward and backward character deletion
* Detection of paste to suppress automatic formatting and statement completion tests
* Correctly reformatting when lines grow or shrink to occupy different numbers of rows
* Saving multi-line history, and correctly preserving the "tip" of history during editing
* Displaying visible ^C and ^D indications when interrupting input or sending EOF
* Fledgling VI support for multi-line editing
* General correctness and reliability improvements
llvm-svn: 222163
This reverses out the options validators changes. We'll get these
back in once the changes to the output can be resolved.
Restores broken tests on FreeBSD, Linux, MacOSX.
Changes reverted: r212500, r212317, r212290.
llvm-svn: 212543
The purpose of the OptionValidator is to determine, based on some
arbitrary set of conditions, whether or not a command option is
valid for a given debugger state. An example of this might be
to selectively disable or enable certain command options that
don't apply to a particular platform.
This patch contains no functional change, and does not actually
make use of an OptionValidator for any purpose yet. A follow-up
patch will begin to add the logic and users of OptionValidator.
Reviewed by: Greg Clayton, Jim Ingham
Differential Revision: http://reviews.llvm.org/D4369
llvm-svn: 212290
Replace adhoc inline implementation of llvm::array_lengthof in favour of the
implementation in LLVM. This is simply a cleanup change, no functional change
intended.
llvm-svn: 211868
When there was no process, the expression options were set to not ignore breakpoints. This causes debug info to be generated and causes errors when evaluating simple expressions.
llvm-svn: 204745
