libExecutionEngine. Move method implementations that aren't specific to
allocation out of SectionMemoryManager and into RTDyldMemoryManager.
This is in preparation for exposing RTDyldMemoryManager through the C
API.
llvm-svn: 182407
AArch64 ELF uses .rela relocations so there's no need to actually make
use of the bits we're setting in the destination However, we should
make sure all bits are cleared properly since multiple runs of
resolveRelocations are possible and these could combine to produce
invalid results if stale versions remain in the code.
llvm-svn: 182214
EngineBuilder interface required a JITMemoryManager even if it was being used
to construct an MCJIT. But the MCJIT actually wants a RTDyldMemoryManager.
Consequently, the SectionMemoryManager, which is meant for MCJIT, derived
from the JITMemoryManager and then stubbed out a bunch of JITMemoryManager
methods that weren't relevant to the MCJIT.
This patch fixes the situation: it teaches the EngineBuilder that
RTDyldMemoryManager is a supertype of JITMemoryManager, and that it's
appropriate to pass a RTDyldMemoryManager instead of a JITMemoryManager if
we're using the MCJIT. This allows us to remove the stub methods from
SectionMemoryManager, and make SectionMemoryManager a direct subtype of
RTDyldMemoryManager.
llvm-svn: 181820
This gets exception handling working on ELF and Macho (x86-64 at least).
Other than the EH frame registration, this patch also implements support
for GOT relocations which are used to locate the personality function on
MachO.
llvm-svn: 181167
This is about the simplest relocation, but surprisingly rare in actual
code.
It occurs in (for example) the MCJIT test test-ptr-reloc.ll.
llvm-svn: 181134
As with global accesses, external functions could exist anywhere in
memory. Therefore the stub must create a complete 64-bit address. This
patch implements the fragment as (roughly):
movz x16, #:abs_g3:somefunc
movk x16, #:abs_g2_nc:somefunc
movk x16, #:abs_g1_nc:somefunc
movk x16, #:abs_g0_nc:somefunc
br x16
In principle we could save 4 bytes by using a literal-load instead,
but it is unclear that would be more efficient and can only be tested
when real hardware is readily available.
This allows (for example) the MCJIT test 2003-05-07-ArgumentTest to
pass on AArch64.
llvm-svn: 181133
The large memory model (default and main viable for JIT) emits
addresses in need of relocation as
movz x0, #:abs_g3:somewhere
movk x0, #:abs_g2_nc:somewhere
movk x0, #:abs_g1_nc:somewhere
movk x0, #:abs_g0_nc:somewhere
To support this we must implement those four relocations in the
dynamic loader.
This allows (for example) the test-global.ll MCJIT test to pass on
AArch64.
llvm-svn: 181132
R_AARCH64_PCREL32 is present in even trivial .eh_frame sections and so
is required to compile any function without the "nounwind" attribute.
This change implements very basic infrastructure in the RuntimeDyldELF
file and allows (for example) the test-shift.ll MCJIT test to pass
on AArch64.
llvm-svn: 181131
Another step towards reinstating the SystemZ backend. I'll commit
the configure changes separately (TARGET_HAS_JIT etc.), then commit
a patch to enable the MCJIT tests on SystemZ.
llvm-svn: 181015
CodeModel: It's now possible to create an MCJIT instance with any CodeModel you like. Previously it was only possible to
create an MCJIT that used CodeModel::JITDefault.
EnableFastISel: It's now possible to turn on the fast instruction selector.
The CodeModel option required some trickery. The problem is that previously, we were ensuring future binary compatibility in
the MCJITCompilerOptions by mandating that the user bzero's the options struct and passes the sizeof() that he saw; the
bindings then bzero the remaining bits. This works great but assumes that the bitwise zero equivalent of any field is a
sensible default value.
But this is not the case for LLVMCodeModel, or its internal equivalent, llvm::CodeModel::Model. In both of those, the default
for a JIT is CodeModel::JITDefault (or LLVMCodeModelJITDefault), which is not bitwise zero.
Hence this change introduces LLVMInitializeMCJITCompilerOptions(), which will initialize the user's options struct with
defaults. The user will use this in the same way that they would have previously used memset() or bzero(). MCJITCAPITest.cpp
illustrates the change, as does the comment in ExecutionEngine.h.
llvm-svn: 180893
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
llvm-svn: 180881
For regular object files this is only meaningful for common symbols. An object
file format with direct support for atoms should be able to provide alignment
information for all symbols.
This replaces getCommonSymbolAlignment and fixes
test-common-symbols-alignment.ll on darwin. This also includes a fix to
MachOObjectFile::getSymbolFlags. It was marking undefined symbols as common
(already tested by existing mcjit tests now that it is used).
llvm-svn: 180736
The implemented RuntimeDyldImpl interface is public. Everything else is private.
Since these classes are not inherited from (yet), there is no need to have
protected members.
llvm-svn: 180733
Re-submitting with fix for OCaml dependency problems (removing dependency on SectionMemoryManager when it isn't used).
Patch by Fili Pizlo
llvm-svn: 180720
For MachO we need information that is not represented in ObjRelocationInfo.
Instead of copying the bits we think are needed from a relocation_iterator,
just pass the relocation_iterator down to the format specific functions.
No functionality change yet as we still drop the information once
processRelocationRef returns.
llvm-svn: 180711
For Mach-O there were 2 implementations for parsing object files. A
standalone llvm/Object/MachOObject.h and llvm/Object/MachO.h which
implements the generic interface in llvm/Object/ObjectFile.h.
This patch adds the missing features to MachO.h, moves macho-dump to
use MachO.h and removes ObjectFile.h.
In addition to making sure that check-all is clean, I checked that the
new version produces exactly the same output in all Mach-O files in a
llvm+clang build directory (including executables and shared
libraries).
To test the performance, I ran macho-dump over all the files in a
llvm+clang build directory again, but this time redirecting the output
to /dev/null. Both the old and new versions take about 4.6 seconds
(2.5 user) to finish.
llvm-svn: 180624
* We only ever specialize these templates with an instantiation of ELFType,
so we don't need a template template.
* Replace LLVM_ELF_COMMA with just passing the individual parameters to the
macro. This requires a second macro for when we only have ELFT, but that
is still a small win.
llvm-svn: 179726
I will remove the isBigEndianHost function once I update clang.
The ifdef logic is designed to
* not use configure/cmake to avoid breaking -arch i686 -arch ppc.
* default to little endian
* be as small as possible
It looks like sys/endian.h is the preferred header on most modern BSD systems,
but it is better to change this in a followup patch as machine/endian.h is
available on FreeBSD, OpenBSD, NetBSD and OS X.
llvm-svn: 179527
When the RuntimeDyldELF::processRelocationRef routine finds the target
symbol of a relocation in the local or global symbol table, it performs
a section-relative relocation:
Value.SectionID = lsi->second.first;
Value.Addend = lsi->second.second;
At this point, however, any Addend that might have been specified in
the original relocation record is lost. This is somewhat difficult to
trigger for relocations within the code section since they usually
do not contain non-zero Addends (when built with the default JIT code
model, in any case). However, the problem can be reliably triggered
by a relocation within the data section caused by code like:
int test[2] = { -1, 0 };
int *p = &test[1];
The initializer of "p" will need a relocation to "test + 4". On
platforms using RelA relocations this means an Addend of 4 is required.
Current code ignores this addend when processing the relocation,
resulting in incorrect execution.
Fixed by taking the Addend into account when processing relocations
to symbols found in the local or global symbol table.
Tested on x86_64-linux and powerpc64-linux.
llvm-svn: 178869
Add #include <unistd.h> to OProfileWrapper.cpp. This provides the declarations for 'read' and 'close' that are otherwise missing, and result in 'error: <foo> was not declared in this scope'.
This matches the issue as reported in bug 15055 "Can no longer compile LLVM with --with-oprofile"
llvm-svn: 174661
