For Mach-O, ld64 supports the `-fobjc-relative-method-lists` flag which
changes the format in which method lists are generated. The format uses
delta encoding vs the original direct-pointer encoding.
This change adds support to `llvm-objdump` and `llvm-otool` for
decoding/dumping of method lists in the delta format. Previously, if a
binary with this information format was passed to the tooling, it would
output invalid information, trying to parse the delta lists as pointer
lists.
After this change, the tooling will output correct information if a
binary in this format is encountered.
The output format is closest feasible match to XCode 15.1's otool
output. Tests are included for both 32bit and 64bit binaries.
The code style was matched as close as possible to existing
implementation of parsing non-delta method lists.
Diff between llvm-objdump and XCode 15.1 otool:
---------
Co-authored-by: Alex B <alexborcan@meta.com>
Primary change is to add a flag `--pretty-pgo-analysis-map` to
llvm-readobj and llvm-objdump that prints block frequencies and branch
probabilities in the same manner as BFI and BPI respectively. This can
be helpful if you are manually inspecting the outputs from the tools.
In order to print, I moved the `printBlockFreqImpl` function from
Analysis to Support and renamed it to `printRelativeBlockFreq`.
nm already prints sizes for data symbols. Do that for function symbols
too, and update objdump to also print size information.
Implements item 3 from https://github.com/llvm/llvm-project/issues/76107
Wasm has no unified virtual memory space as other object formats and
architectures do, so previously WasmObjectFile reported 0 for all
section addresses, and until 428cf71ff used section offsets for function
symbols. Now we use file offsets for function symbols, and this change
switches section addresses to do the same (in linked files). The main
result of this is that objdump now reports VMAs in section listings, and
also uses file offets rather than section offsets when disassembling
linked binaries (matching the behavior of other disassemblers and stack
traces produced by browwsers). To make this work, this PR also updates
objdump's generation of synthetics fallback symbols to match lib/Object
and also correctly plumbs symbol types for regular and dummy symbols
through to the backend to avoid needing special knowledge of address 0.
This also paves the way for generating symbols from name sections rather
than symbol tables or imports (see #76107) by allowing the
disassembler's synthetic fallback symbols match the name-section
generated symbols (in a followup PR).
Today `-split-machine-functions` and `-fbasic-block-sections={all,list}`
cannot be combined with `-basic-block-sections=labels` (the labels
option will be ignored).
The inconsistency comes from the way basic block address map -- the
underlying mechanism for basic block labels -- encodes basic block
addresses
(https://lists.llvm.org/pipermail/llvm-dev/2020-July/143512.html).
Specifically, basic block offsets are computed relative to the function
begin symbol. This relies on functions being contiguous which is not the
case for MFS and basic block section binaries. This means Propeller
cannot use binary profiles collected from these binaries, which limits
the applicability of Propeller for iterative optimization.
To make the `SHT_LLVM_BB_ADDR_MAP` feature work with basic block section
binaries, we propose modifying the encoding of this section as follows.
First let us review the current encoding which emits the address of each
function and its number of basic blocks, followed by basic block entries
for each basic block.
| | |
|--|--|
| Address of the function | Function Address |
| Number of basic blocks in this function | NumBlocks |
| BB entry 1
| BB entry 2
| ...
| BB entry #NumBlocks
To make this work for basic block sections, we treat each basic block
section similar to a function, except that basic block sections of the
same function must be encapsulated in the same structure so we can map
all of them to their single function.
We modify the encoding to first emit the number of basic block sections
(BB ranges) in the function. Then we emit the address map of each basic
block section section as before: the base address of the section, its
number of blocks, and BB entries for its basic block. The first section
in the BB address map is always the function entry section.
| | |
|--|--|
| Number of sections for this function | NumBBRanges |
| Section 1 begin address | BaseAddress[1] |
| Number of basic blocks in section 1 | NumBlocks[1] |
| BB entries for Section 1
|..................|
| Section #NumBBRanges begin address | BaseAddress[NumBBRanges] |
| Number of basic blocks in section #NumBBRanges |
NumBlocks[NumBBRanges] |
| BB entries for Section #NumBBRanges
The encoding of basic block entries remains as before with the minor
change that each basic block offset is now computed relative to the
begin symbol of its containing BB section.
This patch adds a new boolean codegen option `-basic-block-address-map`.
Correspondingly, the front-end flag `-fbasic-block-address-map` and LLD
flag `--lto-basic-block-address-map` are introduced.
Analogously, we add a new TargetOption field `BBAddrMap`. This means BB
address maps are either generated for all functions in the compiling
unit, or for none (depending on `TargetOptions::BBAddrMap`).
This patch keeps the functionality of the old
`-fbasic-block-sections=labels` option but does not remove it. A
subsequent patch will remove the obsolete option.
We refactor the `BasicBlockSections` pass by separating the BB address
map and BB sections handing to their own functions (named
`handleBBAddrMap` and `handleBBSections`). `handleBBSections` renumbers
basic blocks and places them in their assigned sections.
`handleBBAddrMap` is invoked after `handleBBSections` (if requested) and
only renumbers the blocks.
- New tests added:
- Two tests basic-block-address-map-with-basic-block-sections.ll and
basic-block-address-map-with-mfs.ll to exercise the combination of
`-basic-block-address-map` with `-basic-block-sections=list` and
'-split-machine-functions`.
- A driver sanity test for the `-fbasic-block-address-map` option
(basic-block-address-map.c).
- An LLD test for testing the `--lto-basic-block-address-map` option.
This reuses the LLVM IR from `lld/test/ELF/lto/basic-block-sections.ll`.
- Renamed and modified the two existing codegen tests for basic block
address map (`basic-block-sections-labels-functions-sections.ll` and
`basic-block-sections-labels.ll`)
- Removed `SHT_LLVM_BB_ADDR_MAP_V0` tests. Full deprecation of
`SHT_LLVM_BB_ADDR_MAP_V0` and `SHT_LLVM_BB_ADDR_MAP` version less than 2
will happen in a separate PR in a few months.
This patch adds in support for symbolizing PGO information contained
within the SHT_LLVM_BB_ADDR_MAP section in llvm-objdump. The outputs are
simply the raw values contained within the section.
Previously, some tools such as `clang` or `lld` which require strict
order for certain command-line options, such as `clang -cc1` or `lld
-flavor`, would not longer work on Windows, when these tools were linked
as part of `llvm-driver`. This was caused by `InitLLVM` which was part
of the `*_main()` function of these tools, which in turn calls
`windows::GetCommandLineArguments`. That function completly replaces
argc/argv by new UTF-8 contents, so any ajustements to argc/argv made by
`llvm-driver` prior to calling these tools was reset.
`InitLLVM` is now called by the `llvm-driver`. Any tool that
participates in (or is part of) the `llvm-driver` doesn't call
`InitLLVM` anymore.
This presents misleading and confusing output. If you have a function
defined at the beginning of an XCOFF object file, and you have a
function call to an external function, the function call disassembles as
a branch to the local function. That is,
`void f() { f(); g();}`
disassembles as
>00000000 <.f>:
0: 7c 08 02 a6 mflr 0
4: 94 21 ff c0 stwu 1, -64(1)
8: 90 01 00 48 stw 0, 72(1)
c: 4b ff ff f5 bl 0x0 <.f>
10: 4b ff ff f1 bl 0x0 <.f>
With this PR, the second call will display:
`10: 4b ff ff f1 bl 0x0 <.g> `
Using -r can help, but you still get the confusing output:
>10: 4b ff ff f1 bl 0x0 <.f>
00000010: R_RBR .g
When llvm-objdump switched from cl:: to OptTable
(https://reviews.llvm.org/D100433), we dropped support for LLVM cl::
options. Some LLVM_DEBUG in `llvm/lib/Target/$target/MCDisassembler/`
files might be useful. Add -mllvm to allow dumping the information.
```
# -debug is available in an LLVM_ENABLE_ASSERTIONS=on build
llvm-objdump -d -mllvm -debug a.o > /dev/null
```
Link:
https://discourse.llvm.org/t/how-to-enable-debug-logs-in-llvm-objdump/75758
When a section contains two functions x1 and x2, we incorrectly display
x1's relocations when dumping x2 for `--disassemble-symbols=x2 -r`.
Fix#75539 by ignoring these relocations.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
llvm-readobj and llvm-objdump have inconsistent handling of display
lma for sections.
This patch tries to common code up and adapt the same approach for
both tools.
This patch implements `MCInstrAnalysis` state in order to be able
analyze auipc+jalr pairs inside `evaluateBranch`.
This is implemented as follows:
- State: array of currently known GPR values;
- Whenever an auipc is detected in `updateState`, update the state value
of RD with the immediate;
- Whenever a jalr is detected in `evaluateBranch`, check if the state
holds a value for RS1 and use that to compute its target.
Note that this is similar to how binutils implements it and the output
of llvm-objdump should now mostly match the one of GNU objdump.
This patch also updates the relevant llvm-objdump patches and adds a new
one testing the output for interleaved auipc+jalr pairs.
Currently, all the analysis functions provided by `MCInstrAnalysis` work
on a single instruction. On some targets, this limits the kind of
instructions that can be successfully analyzed as common constructs may
need multiple instructions.
For example, a typical call sequence on RISC-V uses a auipc+jalr pair.
In order to analyse the jalr inside `evaluateBranch`, information about
the corresponding auipc is needed. Similarly, AArch64 uses adrp+ldr
pairs to access globals.
This patch proposes to add state to `MCInstrAnalysis` to support these
use cases. Two new virtual methods are added:
- `updateState`: takes an instruction and its address. This methods
should be called by clients on every instruction and allows targets to
store whatever information they need to analyse future instructions.
- `resetState`: clears the state whenever it becomes irrelevant. Clients
could call this, for example, when starting to disassemble a new
function.
Note that the default implementations do nothing so this patch is NFC.
No actual state is stored inside `MCInstrAnalysis`; deciding the
structure of the state is left to the targets.
This patch also modifies llvm-objdump to use the new interface.
This patch is an alternative to
[D116677](https://reviews.llvm.org/D116677) and the idea of storing
state in `MCInstrAnalysis` was first discussed there.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an
enum. This patch replaces support::{big,little,native} with
llvm::endianness::{big,little,native}.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an enum.
This patch replaces llvm::support::{big,little,native} with
llvm::endianness::{big,little,native}.
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
support::endianness with llvm::endianness.
It's no longer possible to submit bitcode apps to the Apple App Store.
The tools
used to create xar archived bitcode sections inside MachO files have
been
discontinued. Additionally, the xar APIs have been deprecated since
macOS 12,
so this change removes unnecessary code from objdump and all
dependencies on
libxar.
This fixes rdar://116600767
Now that llvm::support::endianness has been renamed to
llvm::endianness, we can use the shorter form. This patch replaces
llvm::support::endianness with llvm::endianness.
Extend llvm-objdump to show CO-RE relocations when `-r` option is
passed and object file has .BTF and .BTF.ext sections.
For example, the following C program:
#define __pai __attribute__((preserve_access_index))
struct foo { int i; int j;} __pai;
struct bar { struct foo f[7]; } __pai;
extern void sink(void *);
void root(struct bar *bar) {
sink(&bar[2].f[3].j);
}
Should lead to the following objdump output:
$ clang --target=bpf -O2 -g t.c -c -o - | \
llvm-objdump --no-addresses --no-show-raw-insn -dr -
...
r2 = 0x94
CO-RE <byte_off> [2] struct bar::[2].f[3].j (2:0:3:1)
r1 += r2
call -0x1
R_BPF_64_32 sink
exit
...
More examples could be found in unit tests, see BTFParserTest.cpp.
To achieve this:
- Move CO-RE relocation kinds definitions from BPFCORE.h to BTF.h.
- Extend BTF.h with types derived from BTF::CommonType, e.g.
BTF::IntType and BTF::StrutType, to allow dyn_cast() and access to
type additional data.
- Extend BTFParser to load BTF type and relocation data.
- Modify llvm-objdump.cpp to create instance of BTFParser when
disassembly of object file with BTF sections is processed and `-r`
flag is supplied.
Additional information about CO-RE is available at [1].
[1] https://docs.kernel.org/bpf/llvm_reloc.html
Depends on D149058
Differential Revision: https://reviews.llvm.org/D150079
Add a shouldAdjustVA(Section) guard on top of address update.
Update llvm-objdump file to update symbol table when --adjust-vma used.
Fixes#63203
Patch by HamidrezaSK (Hamidreza Sanaee)
Enable color highlighting of disassembly in llvm-objdump. This patch
introduces a new flag --disassembler-color=<mode> that enables or
disables highlighting disassembly with ANSI escape codes. The default
mode is to enable color highlighting if outputting to a color-enabled
terminal.
Differential revision: https://reviews.llvm.org/D159224
All command-line tools using `llvm::opt` create an enum of option IDs and a table of `OptTable::Info` object. Most of the tools use the same ID (`OPT_##ID`), kind (`Option::KIND##Class`), group ID (`OPT_##GROUP`) and alias ID (`OPT_##ALIAS`). This patch extracts that common code into canonical macros. This results in fewer changes when tweaking the `OPTION` macros emitted by the TableGen backend.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D157028
Similar to D96617 for llvm-symbolizer.
This patch matches the GNU objdump -d behavior to suppress printing
labels for mapping symbols. Mapping symbol names don't convey much
information.
When --show-all-symbols (not in GNU) is specified, we still print
mapping symbols.
Note: the `for (size_t SI = 0, SE = Symbols.size(); SI != SE;)` loops
needs to iterate all mapping symbols, even if they are not displayed.
We use the new field `IsMappingSymbol` to recognize mapping symbols.
This field also enables simplification after D139131.
ELF/ARM/disassemble-all-mapping-symbols.s is enhanced to add `.space 2`.
If `End = std::min(End, Symbols[SI].Addr);` is not correctly set, we
would print a `.word`.
Reviewed By: jhenderson, jobnoorman, peter.smith
Differential Revision: https://reviews.llvm.org/D156190
to prevent overload resolution confusion. In particular, if we add
another parameter to the generic constructor, MCDisassemblerTest.cpp
specified constructors will be resolve to the generic constructor, which
is unintended.
Mach-O can just use the global variable `FirstPrivateHeader`.
If we ever manage to remove global variables, we can add a Config
variable to Dumper. Either case, the parameter is not needed.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D156291
This is a preparation for ARM64EC/ARM64X binaries, which may contain both ARM64
and x86_64 code in the same file. llvm-objdump already has partial support for
mixing disassemblers for ARM thumb mode support. However, for ARM64EC we can't
share MCContext, MCInstrAnalysis and PrettyPrinter instances. This patch
provides additional abstraction which makes adding mixed code support later in
the series easier.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D149093
This is a preparation for ARM64EC/ARM64X binaries, which may contain both ARM64
and x86_64 code in the same file. llvm-objdump already has partial support for
mixing disassemblers for ARM thumb mode support. However, for ARM64EC we can't
share MCContext, MCInstrAnalysis and PrettyPrinter instances. This patch
provides additional abstraction which makes adding mixed code support later in
the series easier.
Reviewed By: jhenderson, MaskRay
Differential Revision: https://reviews.llvm.org/D149093
