Currently, we arbitrarily paginate editline completions to 40 elements.
On large terminals, that leaves some real-estate unused. On small
terminals, it's pretty annoying to not see the first completions. We can
address both issues by using the terminal height for pagination.
This builds on the improvements of #116456.
"statistics dump" currently report the statistics of all targets in
debugger instead of current target. This is wrong because there is a
"statistics dump --all-targets" option that supposed to include
everything.
This PR fixes the issue by only report statistics for current target
instead of all. It also includes the change to reset statistics debug
info/symbol table parsing/indexing time during debugger destroy. This is
required so that we report current statistics if we plan to reuse
lldb/lldb-dap across debug sessions
---------
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
(this is lldb part)
Without these explicit includes, removing other headers, who implicitly
include llvm-config.h, may have non-trivial side effects. For example,
`clangd` may report even `llvm-config.h` as "no used" in case it defines
a macro, that is explicitly used with #ifdef. It is actually amplified
with different build configs which use different set of macros.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
@walter-erquinigo found the the [PR with testing and a fix for
DebugInfoD](https://github.com/llvm/llvm-project/pull/98344) caused an
issue when working with stripped binaries.
The issue is that when you're working with split-dwarf, there are *3*
possible files: The stripped binary the user is debugging, the
"only-keep-debug" *or* unstripped binary, plus the `.dwp` file. The
debuginfod plugin should provide the unstripped/OKD binary. However, if
the debuginfod plugin fails, the default symbol locator plugin will just
return the stripped binary, which doesn't help. So, to address that, the
SymbolVendorELF code checks to see if the SymbolLocator's
ExecutableObjectFile request returned the same file, and bails if that's
the case. You can see the specific diff as the second commit in the PR.
I'm investigating adding a test: I can't quite get a simple repro, and
I'm unwilling to make any additional changes to Makefile.rules to this
diff, for Pavlovian reasons.
This reverts commit 2fa1220a37a3f55b76a29803d8333b3a3937d53a.
This reverts commit b9496a74eb4029629ca2e440c5441614e766f773.
The patch #98344 causes a crash in LLDB when parsing some files like `numpy.libs/libgfortran-daac5196.so.5.0.0` on graviton (you can download it in https://drive.google.com/file/d/12ygLjJwWpzdYsrzBPp1JGiFHxcgM0-XY/view?usp=drive_link if you want to troubleshoot yourself).
The assert that is hit is the following:
```
llvm-project/lldb/source/Plugins/ObjectFile/ELF/ObjectFileELF.cpp:2452: std::pair<unsigned int, std::map<long unsigned int, lldb_private::AddressClass> > ObjectFileELF::ParseSymbolTable(lldb_private::Symtab*, lldb::user_id_t, lldb_private::Section*): Assertion `strtab->GetObjectFile() == this' failed.
[383588:383636:20240716,025305.572639:ERROR crashpad_client_linux.cc:780] Crashpad isn't enabled
```
This object file doesn't have apparently a strings table but LLDB still tries to process it due to the code that is being reverted.
This is all the tests and fixes I've had percolating since my first
attempt at this in January. After 6 months of trying, I've given up on
adding the ability to test DWP files in LLDB API tests. I've left both
the tests (disabled) and the changes to Makefile.rules in place, in the
hopes that someone who can configure the build bots will be able to
enable the tests once a non-borked dwp tool is widely available.
Other than disabling the DWP tests, this continues to be the same diff
that I've tried to land and
[not](https://github.com/llvm/llvm-project/pull/90622)
[revert](https://github.com/llvm/llvm-project/pull/87676)
[five](https://github.com/llvm/llvm-project/pull/86812)
[times](https://github.com/llvm/llvm-project/pull/85693)
[before](https://github.com/llvm/llvm-project/pull/96802). There are a
couple of fixes that the testing exposed, and I've abandoned the DWP
tests because I want to get those fixes finally upstreamed, as without
them DebugInfoD is less useful.
Reverts llvm/llvm-project#96802
Attempt #5 fails. It's been 6 months. I despise Makefile.rules and have
no ability to even *detect* these failures without _landing_ a diff. In
the mean time, we have no testing for DWP files at all (and a regression
that was introduced, that I fix with this diff) so I'm going to just
remove some of the tests and try to land it again, but with less testing
I guess.
This is the same diff I've put up at many times before. I've been trying
to add some brand new functionality to the LLDB test infrastucture
(create split-dwarf files!), and we all know that no good deed goes
unpunished. The last attempt was reverted because it didn't work on the
Fuchsia build.
There are no code differences between this and
[the](https://github.com/llvm/llvm-project/pull/90622)
[previous](https://github.com/llvm/llvm-project/pull/87676)
[four](https://github.com/llvm/llvm-project/pull/86812)
[diffs](https://github.com/llvm/llvm-project/pull/85693) landed &
reverted (due to testing infra failures). The only change in this one is
the way `dwp` is being identified in `Makefile.rules`.
Thanks to @petrhosek for helping me figure out how the fuchsia builders
are configured. I now prefer to use llvm-dwp and fall back to gnu's dwp
if the former isn't found. Hopefully this will work everywhere it needs
to.
New fixes:
- properly init the `std::optional<std::vector>` to an empty vector as
opposed to `{}` (which was effectively `std::nullopt`).
---------
Co-authored-by: Vy Nguyen <oontvoo@users.noreply.github.com>
Re-apply https://github.com/llvm/llvm-project/pull/87550 with fixes.
Details:
Some tests in fuchsia failed because of the newly added assertion.
This was because `GetExceptionBreakpoint()` could be called before
`g_dap.debugger` was initted.
The fix here is to just lazily populate the list in
GetExceptionBreakpoint() rather than assuming it's already been initted.
(There is some nuisance here because we can't simply just populate it in
DAP::DAP(), which is a global ctor and is called before
`SBDebugger::Initialize()` is called. )
Here we go with attempt number five. Again, no changes to the LLDB code
diff, which has been reviewed several times.
For the tests, I added a `@skipIfCurlSupportMissing` annotation so that
the Debuginfod mocked server stuff won't run, and I also disabled
non-Linux/FreeBSD hosts altogether, as they fail for platform reasons on
macOS and Windows. In addition, I updated the process for extracting the
GNU BuildID to no create a target, per some feedback on the previous
diff.
For reference, previous PR's (landed, backed out after the fact for
various reasons) #90622, #87676, #86812, #85693
---------
Co-authored-by: Kevin Frei <freik@meta.com>
# Motivation
Individual callers of `SBDebugger::SetDestroyCallback()` might think
that they have registered their callback and expect it to be called when
the debugger is destroyed. In reality, only the last caller survives,
and all previous callers are forgotten, which might be a surprise to
them. Worse, if this is called in a race condition, which callback
survives is less predictable, which may case confusing behavior
elsewhere.
# This PR
Allows multiple destroy callbacks to be registered and all called when
the debugger is destroyed.
**EDIT**: Adds two new APIs: `AddDestroyCallback()` and
`ClearDestroyCallback()`. `SetDestroyCallback()` will first clear then
add the given callback. Tests are added for the new APIs.
## Tests
```
bin/llvm-lit -sv ../external/llvm-project/lldb/test/API/python_api/debugger/TestDebuggerAPI.py
```
## (out-dated, see comments below) Semantic change to
`SetDestroyCallback()`
~~Currently, the method overwrites the old callback with the new one.
With this PR, it will NOT overwrite. Instead, it will hold on to both.
Both callbacks get called during destroy.~~
~~**Risk**: Although the documentation of `SetDestroyCallback()` (see
[C++](https://lldb.llvm.org/cpp_reference/classlldb_1_1SBDebugger.html#afa1649d9453a376b5c95888b5a0cb4ec)
and
[python](https://lldb.llvm.org/python_api/lldb.SBDebugger.html#lldb.SBDebugger.SetDestroyCallback))
doesn't really specify the behavior, there is a risk: if existing call
sites rely on the "overwrite" behavior, they will be surprised because
now the old callback will get called. But as the above said, the current
behavior of "overwrite" itself might be unintended, so I don't
anticipate users to rely on this behavior. In short, this risk might be
less of a problem if we correct it sooner rather than later (which is
what this PR is trying to do).~~
## (out-dated, see comments below) Implementation
~~The implementation holds a `std::vector<std::pair<callback, baton>>`.
When `SetDestroyCallback()` is called, callbacks and batons are appended
to the `std::vector`. When destroy event happen, the `(callback, baton)`
pairs are invoked FIFO. Finally, the `std::vector` is cleared.~~
# (out-dated, see comments below) Alternatives considered
~~Instead of changing `SetDestroyCallback()`, a new method
`AddDestroyCallback()` can be added, which use the same
`std::vector<std::pair<>>` implementation. Together with
`ClearDestroyCallback()` (see below), they will replace and deprecate
`SetDestroyCallback()`. Meanwhile, in order to be backward compatible,
`SetDestroyCallback()` need to be updated to clear the `std::vector` and
then add the new callback. Pros: The end state is semantically more
correct. Cons: More steps to take; potentially maintaining an
"incorrect" behavior (of "overwrite").~~
~~A new method `ClearDestroyCallback()` can be added. Might be
unnecessary at this point, because workflows which need to set then
clear callbacks may exist but shouldn't be too common at least for now.
Such method can be added later when needed.~~
~~The `std::vector` may bring slight performance drawback if its
implementation doesn't handle small size efficiently. However, even if
that's the case, this path should be very cold (only used during init
and destroy). Such performance drawback should be negligible.~~
~~A different implementation was also considered. Instead of using
`std::vector`, the current `m_destroy_callback` field can be kept
unchanged. When `SetDestroyCallback()` is called, a lambda function can
be stored into `m_destroy_callback`. This lambda function will first
call the old callback, then the new one. This way, `std::vector` is
avoided. However, this implementation is more complex, thus less
readable, with not much perf to gain.~~
---------
Co-authored-by: Roy Shi <royshi@meta.com>
These are hardcoded strings that are already present in the data section
of the binary, no need to immediately place them in the ConstString
StringPools. Lots of code still calls `GetBroadcasterClass` and places
the return value into a ConstString. Changing that would be a good
follow-up.
Additionally, calls to these functions are still wrapped in ConstStrings
at the SBAPI layer. This is because we must guarantee the lifetime of
all strings handed out publicly.
Add a configuration entry for whether LLDB was configured with wide
character support in Editline and use it in a decorator to guard the
UTF-8 prompt test.
These functions have been NO-OPs since 2014 (44d937820b451). Remove them
and deprecate the corresponding functions in SBDebugger.
Differential revision: https://reviews.llvm.org/D158000
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
This doesn't need to be in the ConstString StringPool. There's little
benefit to having these be unique, and we don't need fast comparisons on
them.
Differential Revision: https://reviews.llvm.org/D151524
Many SB classes have public constructors or methods involving types that
are private. Some are more obvious (e.g. containing lldb_private in the
name) than others (lldb::FooSP is usually std::shared_pointer<lldb_private::Foo>).
This commit explicitly does not address FileSP, so I'm leaving that one
alone for now.
Some of these were for other SB classes to use and should have been made
protected/private with a friend class entry added. Some of these were
public for some of the swig python helpers to use. I put all of those
functions into a class and made them static methods. The relevant SB
classes mark that class as a friend so they can access those
private/protected members.
I've also removed an outdated SBStructuredData test (can you guess which
constructor it was using?) and updated the other relevant tests.
Differential Revision: https://reviews.llvm.org/D150157
Various OptionValue related classes are passing around will_modify but
the value is never used. This patch simplifies the interfaces by
removing the redundant argument.
Instead of taking a `const std::string &` we can take an
`llvm::StringRef`. The motivation for this change is that many of the
callers of `ParseJSON` end up creating a temporary `std::string` from an existing
`StringRef` or `const char *` in order to satisfy the API. There's no
reason we need to do this.
Differential Revision: https://reviews.llvm.org/D148579
Adding a new SBDebugger::SetDestroyCallback() API.
This API can be used by any client to query for statistics/metrics before
exiting debug sessions.
Differential Revision: https://reviews.llvm.org/D143520
Consider the following example as motivation. Say you have to load
symbols for 3 dynamic libraries: `libFoo`, `libBar` and `libBaz`.
Currently, there are two ways to report process for this operation:
1. As 3 separate progress instances. In this case you create a progress
instance with the message "Loading symbols: libFoo", "Loading
symbols: libBar", and "Loading symbols: libBaz" respectively. Each
progress event gets a unique ID and therefore cannot be correlated
by the consumer.
2. As 1 progress instance with 3 units of work. The title would be
"Loading symbols" and you call Progress::Increment for each of the
libraries. The 3 progress events share the same ID and can easily be
correlated, however, in the current design, there's no way to
include the name of the libraries.
The second approach is preferred when the amount of work is known in
advance, because determinate progress can be reported (i.e. x out of y
operations completed). An additional benefit is that the progress
consumer can decide to ignore certain progress updates by their ID if
they are deemed to noisy, which isn't trivial for the first approach due
to the use of different progress IDs.
This patch adds the ability to add a message (detail) to a progress
event update. For the example described above, progress can now be
displayed as shown:
[1/3] Loading symbols: libFoo
[2/3] Loading symbols: libBar
[3/3] Loading symbols: libBaz
Differential revision: https://reviews.llvm.org/D143690
This is a preparatory patch to add an SB API to get the progress data as
SBStructuredData. The advantage of using SBStructuredData is that the
dictionary can grow over time with more fields.
This approach is identical to the way this is implemented for diagnostic
events.
Differential revision: https://reviews.llvm.org/D143687
Hoist the code that creates a StructuredData dictionary from a
diagnostic event into the DiagnosticEventData. This addresses Ismail's
code review feedback from D143687.
Differential revision: https://reviews.llvm.org/D143694
This patch is preparatory work for Scripted Platform support and does
multiple things:
First, it introduces new options for the `platform select` command and
`SBPlatform::Create` API, to hold a reference to the debugger object,
the name of the python script managing the Scripted Platform and a
structured data dictionary that the user can use to pass arbitrary data.
Then, it updates the various `Create` and `GetOrCreate` methods for
the `Platform` and `PlatformList` classes to pass down the new parameter
to the `Platform::CreateInstance` callbacks.
Finally, it updates every callback to reflect these changes.
Differential Revision: https://reviews.llvm.org/D139249
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Around this time last year, I said on the mailing list [1] that I wanted
to to transform the reproducers into something that resembles a
sysdiagnose on Apple platforms: a collection of files containing a
variety of information to help diagnose bugs or troubleshoot issues.
This patch adds that framework. Based on lessons learned from the
reproducers, I've intentionally tried to keep it small and simple.
Different parts of LLDB can register callbacks (this is necessary for
layering purposes) that will get called when the diagnostics should be
generated.
[1] https://lists.llvm.org/pipermail/lldb-dev/2021-September/017045.html
Differential revision: https://reviews.llvm.org/D134991
This patch adds new SBDebugger::GetSetting() API which
enables client to access settings as SBStructedData.
Implementation wise, a new ToJSON() virtual function is added to OptionValue
class so that each concrete child class can override and provides its
own JSON representation. This patch aims to define the APIs and implement
a common set of OptionValue child classes, leaving the remaining for
future patches.
This patch is used later by auto deduce source map from source line breakpoint
feature for testing generated source map entries.
Differential Revision: https://reviews.llvm.org/D133038
This patch adds a new flag to `log enable`, allowing the user to specify
a custom log handler. In addition to the default (stream) handler, this
allows using the circular log handler (which logs to a fixed size,
in-memory circular buffer) as well as the system log handler (which logs
to the operating system log).
Differential revision: https://reviews.llvm.org/D128323
This patch adds a buffered logging mode to lldb. A buffer size can be
passed to `log enable` with the -b flag. If no buffer size is specified,
logging is unbuffered.
Differential revision: https://reviews.llvm.org/D127986
Add trace load functionality to SBDebugger via the `LoadTraceFromFile` method.
Update intelpt test case class to have `testTraceLoad` method so we can take advantage of
the testApiAndSB decorator to test both the CLI and SB without duplicating code.
Differential Revision: https://reviews.llvm.org/D128107
This patch moves the platform creation and selection logic into the
per-debugger platform lists. I've tried to keep functional changes to a
minimum -- the main (only) observable difference in this change is that
APIs, which select a platform by name (e.g.,
Debugger::SetCurrentPlatform) will not automatically pick up a platform
associated with another debugger (or no debugger at all).
I've also added several tests for this functionality -- one of the
pleasant consequences of the debugger isolation is that it is now
possible to test the platform selection and creation logic.
This is a product of the discussion at
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>.
Differential Revision: https://reviews.llvm.org/D120810
As noticed in D87637, when LLDB crashes, we only print stack traces if
LLDB is directly executed, not when used via Python bindings. Enabling
this by default may be undesirable (libraries shouldn't be messing with
signal handlers), so make this an explicit opt-in.
I "commandeered" this patch from Jordan Rupprecht who put this up for
review originally.
Differential revision: https://reviews.llvm.org/D91835
Expose diagnostic events through the SB API. Unlike the progress events,
I opted to use a SBStructuredData so that we can add fields in the
future.
Differential revision: https://reviews.llvm.org/D121818
