A template name can refer to a set of overloaded function
templates. Model this in TemplateName, which can now refer to an
OverloadedFunctionDecl that contains function templates. This removes
an unspeakable hack in Sema::isTemplateName.
llvm-svn: 77488
until Doug Gregor's Type smart pointer code lands (or more discussion occurs).
These methods just call the new Type::getAs<XXX> methods, so we still have
reduced implementation redundancy. Having explicit getAsXXXType() methods makes
it easier to set breakpoints in the debugger.
llvm-svn: 76193
This method is intended to eventually replace the individual
Type::getAsXXXType<> methods.
The motivation behind this change is twofold:
1) Reduce redundant implementations of Type::getAsXXXType() methods. Most of
them are basically copy-and-paste.
2) By centralizing the implementation of the getAs<Type> logic we can more
smoothly move over to Doug Gregor's proposed canonical type smart pointer
scheme.
Along with this patch:
a) Removed 'Type::getAsPointerType()'; now clients use getAs<PointerType>.
b) Removed 'Type::getAsBlockPointerTypE()'; now clients use getAs<BlockPointerType>.
llvm-svn: 76098
Remove ASTContext parameter from DeclContext's methods. This change cascaded down to other Decl's methods and changes to call sites started "escalating".
Timings using pre-tokenized "cocoa.h" showed only a ~1% increase in time run between and after this commit.
llvm-svn: 74506
The implementations of these methods can Use Decl::getASTContext() to get the ASTContext.
This commit touches a lot of files since call sites for these methods are everywhere.
I used pre-tokenized "carbon.h" and "cocoa.h" headers to do some timings, and there was no real time difference between before the commit and after it.
llvm-svn: 74501
templates.
For example, this now type-checks (but does not instantiate the body
of deref<int>):
template<typename T> T& deref(T* t) { return *t; }
void test(int *ip) {
int &ir = deref(ip);
}
Specific changes/additions:
* Template argument deduction from a call to a function template.
* Instantiation of a function template specializations (just the
declarations) from the template arguments deduced from a call.
* FunctionTemplateDecls are stored directly in declaration contexts
and found via name lookup (all forms), rather than finding the
FunctionDecl and then realizing it is a template. This is
responsible for most of the churn, since some of the core
declaration matching and lookup code assumes that all functions are
FunctionDecls.
llvm-svn: 74213
<rdar://problem/6952203>.
To do this, we actually remove a not-quite-correct optimization in the
C++ name lookup routines. We'll revisit this optimization for the
general case once more C++ is working.
llvm-svn: 73659
preprocessor and initialize it early in clang-cc. This
ensures that __has_builtin works in all modes, not just
when ASTContext is around.
llvm-svn: 73319
references. There are several smallish fixes here:
- Make sure we look through template parameter scope when
determining whether we're parsing a nested class (or nested class
*template*). This makes sure that we delay parsing the bodies of
inline member functions until after we're out of the outermost
class (template) scope.
- Since the bodies of member functions are always parsed
"out-of-line", even when they were declared in-line, teach
unqualified name lookup to look into the (semantic) parents.
- Use the new InstantiateDeclRef to handle the instantiation of a
reference to a declaration (in DeclRefExpr), which drastically
simplifies template instantiation for DeclRefExprs.
- When we're instantiating a ParmVarDecl, it must be in the current
instantiation scope, so only look there.
Also, remove the #if 0's and FIXME's from the dynarray example, which
now compiles and executes thanks to Anders and Eli.
llvm-svn: 72481
specialization" within a C++ template, and permit name lookup into the
current instantiation. For example, given:
template<typename T, typename U>
struct X {
typedef T type;
X* x1; // current instantiation
X<T, U> *x2; // current instantiation
X<U, T> *x3; // not current instantiation
::X<type, U> *x4; // current instantiation
X<typename X<type, U>::type, U>: *x5; // current instantiation
};
llvm-svn: 71471
As part of this, make ObjCImplDecl inherit from NamedDecl (since
ObjCImplementationDecls now need to have names so that they can be
found). This brings ObjCImplDecl very, very close to
ObjCContainerDecl; we may be able to merge them soon.
llvm-svn: 69941
their own namespace (IDNS_Protocol) and use the normal name-lookup
routines to find them. Aside from the simplification this provides
(one less DenseMap!), it means that protocols will be lazily
deserialized from PCH files.
Make the code size of the selector table block match the code size of
the type and decl blocks.
llvm-svn: 69939
identifiers from a precompiled header.
This patch changes the primary name lookup method for entities within
a precompiled header. Previously, we would load all of the names of
declarations at translation unit scope into a large DenseMap (inside
the TranslationUnitDecl's DeclContext), and then perform a special
"last resort" lookup into this DeclContext when we knew there was a
PCH file (see Sema::LookupName). Now, when we see an identifier named
for the first time, we load all of the declarations with that name
that are visible from the translation unit into the IdentifierInfo's
chain of declarations. Thus, the explicit "look into the translation
unit's DeclContext" code is gone, and Sema effectively uses the same
IdentifierInfo-based name lookup mechanism whether we are using a PCH
file or not.
This approach should help PCH scale with the size of the input program
rather than the size of the PCH file. The "Hello, World!" application
with Carbon.h as a PCH file now loads 20% of the identifiers in the
PCH file rather than 85% of the identifiers.
90% of the 20% of identifiers loaded are actually loaded when we
deserialize the preprocessor state. The next step is to make the
preprocessor load macros lazily, which should drastically reduce the
number of types, declarations, and identifiers loaded for "Hello,
World".
llvm-svn: 69737
de-serialization of abstract syntax trees.
PCH support serializes the contents of the abstract syntax tree (AST)
to a bitstream. When the PCH file is read, declarations are serialized
as-needed. For example, a declaration of a variable "x" will be
deserialized only when its VarDecl can be found by a client, e.g.,
based on name lookup for "x" or traversing the entire contents of the
owner of "x".
This commit provides the framework for serialization and (lazy)
deserialization, along with support for variable and typedef
declarations (along with several kinds of types). More
declarations/types, along with important auxiliary structures (source
manager, preprocessor, etc.), will follow.
llvm-svn: 68732
failures that involve malformed types, e.g., "typename X::foo" where
"foo" isn't a type, or "std::vector<void>" that doens't instantiate
properly.
Similarly, be a bit smarter in our handling of ambiguities that occur
in Sema::getTypeName, to eliminate duplicate error messages about
ambiguous name lookup.
This eliminates two XFAILs in test/SemaCXX, one of which was crying
out to us, trying to tell us that we were producing repeated error
messages.
llvm-svn: 68251
pointer. Its purpose in life is to be a glorified void*, but which does not
implicitly convert to void* or other OpaquePtr's with a different UID.
Introduce Action::DeclPtrTy which is a typedef for OpaquePtr<0>. Change the
entire parser/sema interface to use DeclPtrTy instead of DeclTy*. This
makes the C++ compiler enforce that these aren't convertible to other opaque
types.
We should also convert ExprTy, StmtTy, TypeTy, AttrTy, BaseTy, etc,
but I don't plan to do that in the short term.
The one outstanding known problem with this patch is that we lose the
bitmangling optimization where ActionResult<DeclPtrTy> doesn't know how to
bitmangle the success bit into the low bit of DeclPtrTy. I will rectify
this with a subsequent patch.
llvm-svn: 67952
qualified name, e.g.,
foo::x
so that we retain the nested-name-specifier as written in the source
code and can reproduce that qualified name when printing the types
back (e.g., in diagnostics). This is PR3493, which won't be complete
until finished the other tasks mentioned near the end of this commit.
The parser's representation of nested-name-specifiers, CXXScopeSpec,
is now a bit fatter, because it needs to contain the scopes that
precede each '::' and keep track of whether the global scoping
operator '::' was at the beginning. For example, we need to keep track
of the leading '::', 'foo', and 'bar' in
::foo::bar::x
The Action's CXXScopeTy * is no longer a DeclContext *. It's now the
opaque version of the new NestedNameSpecifier, which contains a single
component of a nested-name-specifier (either a DeclContext * or a Type
*, bitmangled).
The new sugar type QualifiedNameType composes a sequence of
NestedNameSpecifiers with a representation of the type we're actually
referring to. At present, we only build QualifiedNameType nodes within
Sema::getTypeName. This will be extended to other type-constructing
actions (e.g., ActOnClassTemplateId).
Also on the way: QualifiedDeclRefExprs will also store a sequence of
NestedNameSpecifiers, so that we can print out the property
nested-name-specifier. I expect to also use this for handling
dependent names like Fibonacci<I - 1>::value.
llvm-svn: 67265
Type pointer. This allows our nested-name-specifiers to retain more
information about the actual spelling (e.g., which typedef did the
user name, or what exact template arguments were used in the
template-id?). It will also allow us to have dependent
nested-name-specifiers that don't map to any DeclContext.
llvm-svn: 67140
- C++ function casts, e.g., T(foo)
- sizeof(), alignof()
More importantly, this allows us to verify that we're performing
overload resolution during template instantiation, with
argument-dependent lookup and the "cached" results of name lookup from
the template definition.
llvm-svn: 66947
C++ templates. In particular, keep track of the overloaded operators
that are visible from the template definition, so that they can be
merged with those operators visible via argument-dependent lookup at
instantiation time.
Refactored the lookup routines for argument-dependent lookup and for
operator name lookup, so they can be called without immediately adding
the results to an overload set.
Instantiation of these expressions is completely wrong. I'll work on
that next.
llvm-svn: 66851
template. More importantly, start to sort out the issues regarding
complete types and nested-name-specifiers, especially the question of:
when do we instantiate a class template specialization that occurs to
the left of a '::' in a nested-name-specifier?
llvm-svn: 66662
giving them rough classifications (normal types, never-canonical
types, always-dependent types, abstract type representations) and
making it far easier to make sure that we've hit all of the cases when
decoding types.
Switched some switch() statements on the type class over to using this
mechanism, and filtering out those things we don't care about. For
example, CodeGen should never see always-dependent or non-canonical
types, while debug info generation should never see always-dependent
types. More switch() statements on the type class need to be moved
over to using this approach, so that we'll get warnings when we add a
new type then fail to account for it somewhere in the compiler.
As part of this, some types have been renamed:
TypeOfExpr -> TypeOfExprType
FunctionTypeProto -> FunctionProtoType
FunctionTypeNoProto -> FunctionNoProtoType
There shouldn't be any functionality change...
llvm-svn: 65591
etc.) when we perform name lookup on them. This ensures that we
produce the correct signature for these functions, which has two
practical impacts:
1) When we're supporting the "implicit function declaration" feature
of C99, these functions will be implicitly declared with the right
signature rather than as a function returning "int" with no
prototype. See PR3541 for the reason why this is important (hint:
GCC always predeclares these functions).
2) If users attempt to redeclare one of these library functions with
an incompatible signature, we produce a hard error.
This patch does a little bit of work to give reasonable error
messages. For example, when we hit case #1 we complain that we're
implicitly declaring this function with a specific signature, and then
we give a note that asks the user to include the appropriate header
(e.g., "please include <stdlib.h> or explicitly declare 'malloc'"). In
case #2, we show the type of the implicit builtin that was incorrectly
declared, so the user can see the problem. We could do better here:
for example, when displaying this latter error message we say
something like:
'strcpy' was implicitly declared here with type 'char *(char *, char
const *)'
but we should really print out a fake code line showing the
declaration, like this:
'strcpy' was implicitly declared here as:
char *strcpy(char *, char const *)
This would also be good for printing built-in candidates with C++
operator overloading.
The set of C library functions supported by this patch includes all
functions from the C99 specification's <stdlib.h> and <string.h> that
(a) are predefined by GCC and (b) have signatures that could cause
codegen issues if they are treated as functions with no prototype
returning and int. Future work could extend this set of functions to
other C library functions that we know about.
llvm-svn: 64504
This commit adds a new attribute, "overloadable", that enables C++
function overloading in C. The attribute can only be added to function
declarations, e.g.,
int *f(int) __attribute__((overloadable));
If the "overloadable" attribute exists on a function with a given
name, *all* functions with that name (and in that scope) must have the
"overloadable" attribute. Sets of overloaded functions with the
"overloadable" attribute then follow the normal C++ rules for
overloaded functions, e.g., overloads must have different
parameter-type-lists from each other.
When calling an overloaded function in C, we follow the same
overloading rules as C++, with three extensions to the set of standard
conversions:
- A value of a given struct or union type T can be converted to the
type T. This is just the identity conversion. (In C++, this would
go through a copy constructor).
- A value of pointer type T* can be converted to a value of type U*
if T and U are compatible types. This conversion has Conversion
rank (it's considered a pointer conversion in C).
- A value of type T can be converted to a value of type U if T and U
are compatible (and are not both pointer types). This conversion
has Conversion rank (it's considered to be a new kind of
conversion unique to C, a "compatible" conversion).
Known defects (and, therefore, next steps):
1) The standard-conversion handling does not understand conversions
involving _Complex or vector extensions, so it is likely to get
these wrong. We need to add these conversions.
2) All overloadable functions with the same name will have the same
linkage name, which means we'll get a collision in the linker (if
not sooner). We'll need to mangle the names of these functions.
llvm-svn: 64336
Also, put Objective-C protocols into their own identifier
namespace. Otherwise, we find protocols when we don't want to in C++
(but not in C).
llvm-svn: 63877
- Changes Lookup*Name functions to return NamedDecls, instead of
Decls. Unfortunately my recent statement that it will simplify lot of
code, was not quite right, but it simplifies some...
- Makes MergeLookupResult SmallPtrSet instead of vector, following
Douglas suggestions.
- Adds %qN format for printing qualified names to Diagnostic.
- Avoids searching for using-directives in Scopes, which are not
DeclScope, during unqualified name lookup.
llvm-svn: 63739
