As noted on D75114, if both arguments of a funnel shift are consecutive loads we are missing the opportunity to combine them into a single load.
Differential Revision: https://reviews.llvm.org/D75624
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
As discussed in the commit thread for rGa253a2a and D73978, we can do more undef folding for FP ops.
The nnan and ninf fast-math-flags specify that if an operand is the disallowed value, the result is
poison, so we can produce an undef result.
But this doesn't work as expected (the undef operand cases remain) because of a Flags propagation
problem in SelectionDAGBuilder.
I've added DAGCombiner calls to enable these for the other cases because we've shown in other
patches that (because of the limited way that SDAG iterates), it is possible to miss simplifications
like this if they are done only at node creation time.
Several potential follow-ups to expand on this patch are possible.
Differential Revision: https://reviews.llvm.org/D75576
Summary:
Follow up from D75377. If the subvector is byte sized and the
index is aligned to the subvector size, we can shrink the load.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: dbabokin, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75434
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
The address calculation for the offset assumes that you can calculate the offset by multiplying the index by the store size of the element. But that only works if the element's store size is exactly its real size since we store vectors tightly packed in memory. There are improvements we could make to this like special casing extracting element 0. I think we could also handle cases where the extracted VT is byte sized and the index is aligned with the extract element count.
Differential Revision: https://reviews.llvm.org/D75377
Select_cc isn't used by all targets. X86 doesn't have optimizations
for it.
Since we already know the input to the sint_to_fp/uint_to_fp is
a setcc we can just emit a plain select using that setcc as the
condition. Other DAG combines can turn that into a select_cc on
targets that support it.
Differential Revision: https://reviews.llvm.org/D75415
We get the simple cases of this via demanded elements and other folds,
but that doesn't work if the values have >1 use, so add a dedicated
match for the pattern.
We already have this transform in IR, but it doesn't help the
motivating x86 tests (based on PR42024) because the shuffles don't
exist until after legalization and other combines have happened.
The AArch64 test shows a minimal IR example of the problem.
Differential Revision: https://reviews.llvm.org/D75348
The alias analysis in DAG Combine looks at the BaseAlign, the Offset and
the Size of two accesses, and determines if they are known to access
different parts of memory by the fact that they are different offsets
from inside that "alignment window". It does not seem to account for
accesses that are not a multiple of the size, and may overflow from one
alignment window into another.
For example in the test case we have a 19byte memset that is splits into
a 16 byte neon store and an unaligned 4 byte store with a 15 byte
offset. This 15byte offset (with a base align of 8) wraps around to the
next alignment windows. When compared to an access that is a 16byte
offset (of the same 4byte size and 8byte basealign), the two accesses
are said not to alias.
I've fixed this here by just ensuring that the offsets are a multiple of
the size, ensuring that they don't overlap by wrapping. Fixes PR45035,
which was exposed by the UseAA changes in the arm backend.
Differential Revision: https://reviews.llvm.org/D75238
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
According to Joseph Myers, a libm maintainer
> They were only ever an ABI (selected by use of -ffinite-math-only or
> options implying it, which resulted in the headers using "asm" to redirect
> calls to some libm functions), not an API. The change means that ABI has
> turned into compat symbols (only available for existing binaries, not for
> anything newly linked, not included in static libm at all, not included in
> shared libm for future glibc ports such as RV32), so, yes, in any case
> where tools generate direct calls to those functions (rather than just
> following the "asm" annotations on function declarations in the headers),
> they need to stop doing so.
As a consequence, we should no longer assume these symbols are available on the
target system.
Still keep the TargetLibraryInfo for constant folding.
Differential Revision: https://reviews.llvm.org/D74712
This may inhibit vector narrowing in general, but there's
already an inconsistency in the way that we deal with this
pattern as shown by the test diff.
We may want to add a dedicated function for narrowing fneg.
It's often folded into some other op, so moving it away from
other math ops may cause regressions that we would not see
for normal binops.
See D73978 for more details.
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
This is the second patch as part of https://bugs.llvm.org/show_bug.cgi?id=36544
Merging in the ConstantSDNode variant of FoldConstantArithmetic. After this, I will begin merging in FoldConstantVectorArithmetic
I've ensured this patch can build & pass all lit tests in Windows and Linux environments.
Patch by @justice_adams (Justice Adams)
Differential Revision: https://reviews.llvm.org/D74881
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
A question about this behavior came up on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139003.html
...and as part of backend improvements in D73978.
We decided not to implement a more general change that would have
folded any FP binop with nearly arbitrary constant + undef operand
to undef because that is not theoretically correct (even if it is
practically correct).
This is the SDAG-equivalent to the IR change in D74713.
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
This includes both GEPs where the indexed type is a scalable vector, and
GEPs where the result type is a scalable vector.
Differential Revision: https://reviews.llvm.org/D73602
Similar to what we already do with SimplifyDemandedVectorElts, call SimplifyDemandedBits across all the extracted elements of the source vector, treating it as single use.
There's a minor regression in store-weird-sizes.ll which will be addressed in an upcoming SimplifyDemandedBits patch.
This reverts commit 649aba93a27170cb03a4b17c98a19b9237a880b8, now that
the approach started there has been shown to be workable in the patch
series culminating in https://reviews.llvm.org/D74192.
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
Backends should fold the subtraction into the comparison, but not all
seem to. Moreover, on targets where pointers are not integers, such as
CHERI, an integer subtraction is not appropriate. Instead we should just
compare the two pointers directly, as this should work everywhere and
potentially generate more efficient code.
Reviewers: bogner, lebedev.ri, efriedma, t.p.northover, uweigand, sunfish
Reviewed By: lebedev.ri
Subscribers: dschuff, sbc100, arichardson, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74454
These are going to be useful in TargetLowering::SimplifyDemandedBits, so expose these helpers outside of SelectionDAG.cpp
Also add an getValidShiftAmountConstant early-out to getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant so we can use them for scalar cases as well.
Summary:
This patch implements the part of the calling convention
where SVE Vectors are passed by reference. This means the
caller must allocate stack space for these objects and
pass the address to the callee.
Reviewers: efriedma, rovka, cameron.mcinally, c-rhodes, rengolin
Reviewed By: efriedma
Subscribers: tschuett, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71216
This adds another pattern to the combiner for a case that we were not handling
to generate the REV16 instruction for ARM/Thumb2 and a bswap+ror on X86.
Differential Revision: https://reviews.llvm.org/D74032
Summary:
When using strict fp, it is required to update the
chain when performing integer type promotion of a
operand to a integer to floating point conversion.
Reviewers: craig.topper, john.brawn
Reviewed By: craig.topper
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74597
Patchable statepoint is lowered into sequence of nops, so zeroed call target
should not be on register. It is better to use getTargetConstant instead
of getConstant to select zero constant for call target.
Reviewers: reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D74465
