Transition InstrProf and Coverage over to the stricter Error/Expected
interface.
Differential Revision: http://reviews.llvm.org/D19901
llvm-svn: 269462
Currently there is no reasonable way to control the warnings in the 'use' phase
of the IRPGO pass. This is problematic because the output can be somewhat
spammy. This patch adds some flags which allow us to optionally disable these
warnings. The current upstream behavior will remain the default.
Patch by Jake VanAdrighem (jvanadrighem@gmail.com)
Differential Revision: http://reviews.llvm.org/D20195
llvm-svn: 269437
Summary: This change fix the bug in isProfitableToUseMemset() where MaxIntSize shoule be in byte, not bit.
Reviewers: arsenm, joker.eph, mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D20176
llvm-svn: 269433
*We don't currently handle the edge case constants (min/max values), so it's not a complete
canonicalization.
To fully solve the motivating bugs, we need to enhance this to recognize a zero vector
too because that's a ConstantAggregateZero which is a ConstantData, not a ConstantVector
or a ConstantDataVector.
Differential Revision: http://reviews.llvm.org/D17859
llvm-svn: 269426
Summary:
...loop after the last iteration.
This is really hard to do correctly. The core problem is that we need to
model liveness through the induction PHIs from iteration to iteration in
order to get the correct results, and we need to correctly de-duplicate
the common subgraphs of instructions feeding some subset of the
induction PHIs. All of this can be driven either from a side effect at
some iteration or from the loop values used after the loop finishes.
This patch implements this by storing the forward-propagating analysis
of each instruction in a cache to recall whether it was free and whether
it has become live and thus counted toward the total unroll cost. Then,
at each sink for a value in the loop, we recursively walk back through
every value that feeds the sink, including looping back through the
iterations as needed, until we have marked the entire input graph as
live. Because we cache this, we never visit instructions more than twice
-- once when we analyze them and put them into the cache, and once when
we count their cost towards the unrolled loop. Also, because the cache
is only two bits and because we are dealing with relatively small
iteration counts, we can store all of this very densely in memory to
avoid this from becoming an excessively slow analysis.
The code here is still pretty gross. I would appreciate suggestions
about better ways to factor or split this up, I've stared too long at
the algorithmic side to really have a good sense of what the design
should probably look at.
Also, it might seem like we should do all of this bottom-up, but I think
that is a red herring. Specifically, the simplification power is *much*
greater working top-down. We can forward propagate very effectively,
even across strange and interesting recurrances around the backedge.
Because we use data to propagate, this doesn't cause a state space
explosion. Doing this level of constant folding, etc, would be very
expensive to do bottom-up because it wouldn't be until the last moment
that you could collapse everything. The current solution is essentially
a top-down simplification with a bottom-up cost accounting which seems
to get the best of both worlds. It makes the simplification incremental
and powerful while leaving everything dead until we *know* it is needed.
Finally, a core property of this approach is its *monotonicity*. At all
times, the current UnrolledCost is a conservatively low estimate. This
ensures that we will never early-exit from the analysis due to exceeding
a threshold when if we had continued, the cost would have gone back
below the threshold. These kinds of bugs can cause incredibly hard to
track down random changes to behavior.
We could use a techinque similar (but much simpler) within the inliner
as well to avoid considering speculated code in the inline cost.
Reviewers: chandlerc
Subscribers: sanjoy, mzolotukhin, llvm-commits
Differential Revision: http://reviews.llvm.org/D11758
llvm-svn: 269388
Ported DA to the new PM by splitting the former DependenceAnalysis Pass
into a DependenceInfo result type and DependenceAnalysisWrapperPass type
and adding a new PM-style DependenceAnalysis analysis pass returning the
DependenceInfo.
Patch by Philip Pfaffe, most of the review by Justin.
Differential Revision: http://reviews.llvm.org/D18834
llvm-svn: 269370
Split FCMP//ICMP/SEL from the basic arithmetic cost functions. They were not sharing any notable code path (just the return) and were repeatedly testing the opcode.
llvm-svn: 269348
LoopVectorBody was changed from a single pointer to a SmallVector when
store predication was introduced in r200270. Since r247139, store predication
no longer splits the vector loop body in-place, so we can go back to having
a single LoopVectorBody block.
This reverts the no-longer-needed changes from r200270.
llvm-svn: 269321
Shifts beyond the bitwidth are undef but SCCP resolved them to zero.
Instead, DTRT and resolve them to undef.
This reimplements the transform which caused PR27712.
llvm-svn: 269269
This new verifier rule lets us unambigously pick a calling convention
when creating a new declaration for
`@llvm.experimental.deoptimize.<ty>`. It is also congruent with our
lowering strategy -- since all calls to `@llvm.experimental.deoptimize`
are lowered to calls to `__llvm_deoptimize`, it is reasonable to enforce
a unique calling convention.
Some of the tests that were breaking this verifier rule have had to be
split up into different .ll files.
The inliner was violating this rule as well, and has been fixed to avoid
producing invalid IR.
llvm-svn: 269261
This should just be a compile-time change. Correct the check for whether
we have already analyzed the callee when making summary based decisions.
There is no need to reprocess one at the same threshold as when it was
last processed.
llvm-svn: 269251
Summary: In sample profile, some branches may have profile missing due to profile inaccuracy. We want existing branch probability still valid after propagation.
Reviewers: hfinkel, davidxl, spatel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19948
llvm-svn: 269137
Sort of the BB-local equivalent to idiom-recognizer: if we have a basic-block
that really implements a memcpy operation, backends can benefit from seeing
this.
llvm-svn: 269125
Before r268509, Clang would disable the loop unroll pass when optimizing
for size. That commit enabled it to be able to support unroll pragmas
in -Os builds. However, this regressed binary size in one of Chromium's
DLLs with ~100 KB.
This restores the original behaviour of no unrolling at -Os, but doing it
in LLVM instead of Clang makes more sense, and also allows the pragmas to
keep working.
Differential revision: http://reviews.llvm.org/D20115
llvm-svn: 269124
This patch extend loopreroll to allow the instruction chain
of loop control only IV has sext.
Differential Revision: http://reviews.llvm.org/D19820
llvm-svn: 269121
Remove the ModuleLevelChanges argument, and the ability to create new
subprograms for cloned functions. The latter was added without review in
r203662, but it has no in-tree clients (all non-test callers pass false
for ModuleLevelChanges [1], so it isn't reachable outside of tests). It
also isn't clear that adding a duplicate subprogram to the compile unit is
always the right thing to do when cloning a function within a module. If
this functionality comes back it should be accompanied with a more concrete
use case.
Furthermore, all in-tree clients add the returned function to the module.
Since that's pretty much the only sensible thing you can do with the function,
just do that in CloneFunction.
[1] http://llvm-cs.pcc.me.uk/lib/Transforms/Utils/CloneFunction.cpp/rCloneFunction
Differential Revision: http://reviews.llvm.org/D18628
llvm-svn: 269110
The plan is to eventually make this logic simpler, however I expect it to
be a little tricky for the foreseeable future (at least until we're rid of
pointee types), so move it here so that it can be reused to build a summary
index for devirtualization.
Differential Revision: http://reviews.llvm.org/D20005
llvm-svn: 269081
Summary:
Add support for emission of plaintext lists of the imported files for
each distributed backend compilation. Used for distributed build file
staging.
Invoked with new gold-plugin thinlto-emit-imports-files option, which is
only valid with thinlto-index-only (i.e. for distributed builds), or
from llvm-lto with new -thinlto-action=emitimports value.
Depends on D19556.
Reviewers: joker.eph
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D19636
llvm-svn: 269067
This restores commit r268627:
Summary:
When launching ThinLTO backends in a distributed build (currently
supported in gold via the thinlto-index-only plugin option), emit
an individual index file for each backend process as described here:
http://lists.llvm.org/pipermail/llvm-dev/2016-April/098272.html
...
Differential Revision: http://reviews.llvm.org/D19556
Address msan failures by avoiding std::prev on map.end(), the
theory is that this is causing issues due to some known UB problems
in __tree.
llvm-svn: 269059
Loop rotation clones instruction from the old header into the preheader. If
there were uses of values produced by these instructions that were outside
the loop, we have to insert PHI nodes to merge the two values. If the values
are used by DbgIntrinsics they will be used as a MetadataAsValue of a
ValueAsMetadata of the original values, and iterating all of the uses of the
original value will not update the DbgIntrinsics. The new code checks if the
values are used by DbgIntrinsics and if so, updates them using essentially
the same logic as the original code.
The attached testcase demonstrates the issue. Without the fix, the
DbgIntrinic outside the loop uses values computed inside the loop, even
though these values do not dominate the DbgIntrinsic.
Author: Thomas Jablin (tjablin)
Reviewers: dblaikie aprantl kbarton hfinkel cycheng
http://reviews.llvm.org/D19564
llvm-svn: 269034
When a va_start or va_copy is immediately followed by a va_end (ignoring
debug information or other start/end in between), then it is safe to
remove the pair. As this code shares some commonalities with the lifetime
markers, this has been factored to helper functions.
This InstCombine pattern kicks-in 3 times when running the LLVM test
suite.
llvm-svn: 269033
This reverts commits r268969, r268979 and r268984. They had target specific test
in generic directories without the correct specifiers and made it hard for us to
come up with a good solution by rapidly committing untested changes.
This test needs to be in a target specific directory or have the correct REQUIRED
identifier.
llvm-svn: 269027
Allow vectorization when the step is a loop-invariant variable.
This is the loop example that is getting vectorized after the patch:
int int_inc;
int bar(int init, int *restrict A, int N) {
int x = init;
for (int i=0;i<N;i++){
A[i] = x;
x += int_inc;
}
return x;
}
"x" is an induction variable with *loop-invariant* step.
But it is not a primary induction. Primary induction variable with non-constant step is not handled yet.
Differential Revision: http://reviews.llvm.org/D19258
llvm-svn: 269023
IR instrumentation generates a COMDAT symbol __llvm_profile_raw_version to
overwrite the same symbol in profile run-time to distinguish IR profiles from
Clang generated profiles. In MACHO, LinkOnceODR linkage is used due to the
lack of COMDAT support.
But LinkOnceODR linkage might have .weak_def_can_be_hidden assembly directive,
while the weak variable in run-time has a .weak_definition directive. Linker
will not merge these two symbols even they have the same name. The end result
is IR profiles are not properly flagged in MACHO.
This patch changes the linkage for __llvm_profile_raw_version in each module to
LinkOnceAny so that it has same .weak_definition directive as in the run-time.
Differential Revision: http://reviews.llvm.org/D20078
llvm-svn: 268969
