Add support for resolving MIPS64r2 and MIPS64r6 relocations in MCJIT.
Patch by Vladimir Radosavljevic.
Differential Revision: http://reviews.llvm.org/D9667
llvm-svn: 238424
This reapplies r235060 and 235070, which were reverted because of test failures
in LLDB. The failure was caused because at moment RuntimeDyld is processing
relocations for all sections, irrespective of whether we actually load them
into memory or not, but RuntimeDyld was not actually remembering where in memory
the unrelocated section is. This commit includes a fix for that issue by
remembering that pointer, though the longer term fix should be to stop processing
unneeded sections.
Original Summary:
This allows us to get rid of the original unrelocated object file after
we're done processing relocations (but before applying them).
MachO and COFF already do not require this (currently we have temporary hacks
to prevent ownership from being released, but those are brittle and should be
removed soon).
The placeholder mechanism allowed the relocation resolver to look at original
object file to obtain more information that are required to apply the
relocations. This is usually necessary in two cases:
- For relocations targetting sub-word memory locations, there may be pieces
of the instruction at the target address which we should not override.
- Some relocations on some platforms allow an extra addend to be encoded in
their immediate fields.
The problem is that in the second case the information cannot be recovered
after the relocations have been applied once because they will have been
overridden. In the first case we also need to be careful to not use any bits
that aren't fixed and may have been overriden by applying a first relocation.
In the past both have been fixed by just looking at original object file. This
patch attempts to recover the information from the first by looking at the
relocated object file, while the extra addend in the second case is read
upon relocation processing and addend to the regular addend.
I have tested this on X86. Other platforms represent my best understanding
of how those relocations should work, but I may have missed something because
I do not have access to those platforms.
We will keep the ugly workarounds in place for a couple of days, so this commit
can be reverted if it breaks the bots.
Differential Revision: http://reviews.llvm.org/D9028
llvm-svn: 236341
Summary:
This is the first in a series of patches to eventually add support for TLS relocations to RuntimeDyld. This patch resolves an issue in the current GOT handling, where GOT entries would be reused between object files, which leads to the same situation that necessitates the GOT in the first place, i.e. that the 32-bit offset can not cover all of the address space. Thus this patch makes the GOT object-file-local.
Unfortunately, this still isn't quite enough, because the MemoryManager does not yet guarantee that sections are allocated sufficiently close to each other, even if they belong to the same object file. To address this concern, this patch also adds a small API abstraction on top of the GOT allocation mechanism that will allow (temporarily, until the MemoryManager is improved) using the stub mechanism instead of allocating a different section. The actual switch from separate section to stub mechanism will be part of a follow-on commit, so that it can be easily reverted independently at the appropriate time.
Test Plan: Includes a test case where the GOT of two object files is artificially forced to be apart by several GB.
Reviewers: lhames
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8813
llvm-svn: 234839
ensure that section addresses are distinct.
mapSectionAddress will fail if two sections are allocated the same address,
which can happen if any section has zero size (since malloc(0) is implementation
defined). Unfortunately I've been unable to repro this with a simple test case.
Fixes <rdar://problem/20314015>.
llvm-svn: 234299
MCJIT.
This patch decouples the two responsibilities of the RTDyldMemoryManager class,
memory management and symbol resolution, into two new classes:
RuntimeDyld::MemoryManager and RuntimeDyld::SymbolResolver.
The symbol resolution interface is modified slightly, from:
uint64_t getSymbolAddress(const std::string &Name);
to:
RuntimeDyld::SymbolInfo findSymbol(const std::string &Name);
The latter passes symbol flags along with symbol addresses, allowing RuntimeDyld
and others to reason about non-strong/non-exported symbols.
The memory management interface removes the following method:
void notifyObjectLoaded(ExecutionEngine *EE,
const object::ObjectFile &) {}
as it is not related to memory management. (Note: Backwards compatibility *is*
maintained for this method in MCJIT and OrcMCJITReplacement, see below).
The RTDyldMemoryManager class remains in-tree for backwards compatibility.
It inherits directly from RuntimeDyld::SymbolResolver, and indirectly from
RuntimeDyld::MemoryManager via the new MCJITMemoryManager class, which
just subclasses RuntimeDyld::MemoryManager and reintroduces the
notifyObjectLoaded method for backwards compatibility).
The EngineBuilder class retains the existing method:
EngineBuilder&
setMCJITMemoryManager(std::unique_ptr<RTDyldMemoryManager> mcjmm);
and includes two new methods:
EngineBuilder&
setMemoryManager(std::unique_ptr<MCJITMemoryManager> MM);
EngineBuilder&
setSymbolResolver(std::unique_ptr<RuntimeDyld::SymbolResolver> SR);
Clients should use EITHER:
A single call to setMCJITMemoryManager with an RTDyldMemoryManager.
OR (exclusive)
One call each to each of setMemoryManager and setSymbolResolver.
This patch should be fully compatible with existing uses of RTDyldMemoryManager.
If it is not it should be considered a bug, and the patch either fixed or
reverted.
If clients find the new API to be an improvement the goal will be to deprecate
and eventually remove the RTDyldMemoryManager class in favor of the new classes.
llvm-svn: 233509
Author: Lang Hames <lhames@gmail.com>
Date: Mon Mar 9 23:51:09 2015 +0000
[Orc][MCJIT][RuntimeDyld] Add header that was accidentally left out of r231724.
Author: Lang Hames <lhames@gmail.com>
Date: Mon Mar 9 23:44:13 2015 +0000
[Orc][MCJIT][RuntimeDyld] Add symbol flags to symbols in RuntimeDyld. Thread the
new types through MCJIT and Orc.
In particular, add a 'weak' flag. When plumbed through RTDyldMemoryManager, this
will allow us to distinguish between weak and strong definitions and find the
right ones during symbol resolution.
llvm-svn: 231731
new types through MCJIT and Orc.
In particular, add a 'weak' flag. When plumbed through RTDyldMemoryManager, this
will allow us to distinguish between weak and strong definitions and find the
right ones during symbol resolution.
llvm-svn: 231724
Provide basic support for dynamically loadable coff objects. Only handles a subset of x64 currently.
Patch by Andy Ayers!
Differential Revision: http://reviews.llvm.org/D7793
llvm-svn: 231574
This has wider implications than I expected when I reviewed the patch: It can
cause JIT crashes where clients have used the default value for AbortOnFailure
during symbol lookup. I'm currently investigating alternative approaches and I
hope to have this back in tree soon.
llvm-svn: 227287
Support weak symbols by first looking up if there is an externally visible symbol we can find,
and only if that fails using the one in the object file we're loading.
Reviewed By: lhames
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6950
llvm-svn: 227228
This patch adds a new set of JIT APIs to LLVM. The aim of these new APIs is to
cleanly support a wider range of JIT use cases in LLVM, and encourage the
development and contribution of re-usable infrastructure for LLVM JIT use-cases.
These APIs are intended to live alongside the MCJIT APIs, and should not affect
existing clients.
Included in this patch:
1) New headers in include/llvm/ExecutionEngine/Orc that provide a set of
components for building JIT infrastructure.
Implementation code for these headers lives in lib/ExecutionEngine/Orc.
2) A prototype re-implementation of MCJIT (OrcMCJITReplacement) built out of the
new components.
3) Minor changes to RTDyldMemoryManager needed to support the new components.
These changes should not impact existing clients.
4) A new flag for lli, -use-orcmcjit, which will cause lli to use the
OrcMCJITReplacement class as its underlying execution engine, rather than
MCJIT itself.
Tests to follow shortly.
Special thanks to Michael Ilseman, Pete Cooper, David Blaikie, Eric Christopher,
Justin Bogner, and Jim Grosbach for extensive feedback and discussion.
llvm-svn: 226940
RuntimeDyld symbol info previously consisted of just a Section/Offset pair. This
patch replaces that pair type with a SymbolInfo class that also tracks symbol
visibility. A new method, RuntimeDyld::getExportedSymbolLoadAddress, is
introduced which only returns a non-zero result for exported symbols. For
non-exported or non-existant symbols this method will return zero. The
RuntimeDyld::getSymbolAddress method retains its current behavior, returning
non-zero results for all symbols regardless of visibility.
No in-tree clients of RuntimeDyld are changed. The newly introduced
functionality will be used by the Orc APIs.
No test case: Since this patch doesn't modify the behavior for any in-tree
clients we don't have a good tool to test this with yet. Once Orc is in we can
use it to write regression tests that test these changes.
llvm-svn: 226341
These methods are only used by MCJIT and are very specific to it. In fact, they
are also fairly specific to the fact that we have a dynamic linker of
relocatable objects.
llvm-svn: 223964
All symbols have to be stored in the global symbol to enable
cross-rtdyld-instance linking, so the local symbol table content is
redundant.
llvm-svn: 222867
Previously, when loading an object file, RuntimeDyld (1) took ownership of the
ObjectFile instance (and associated MemoryBuffer), (2) potentially modified the
object in-place, and (3) returned an ObjectImage that managed ownership of the
now-modified object and provided some convenience methods. This scheme accreted
over several years as features were tacked on to RuntimeDyld, and was both
unintuitive and unsafe (See e.g. http://llvm.org/PR20722).
This patch fixes the issue by removing all ownership and in-place modification
of object files from RuntimeDyld. Existing behavior, including debugger
registration, is preserved.
Noteworthy changes include:
(1) ObjectFile instances are now passed to RuntimeDyld by const-ref.
(2) The ObjectImage and ObjectBuffer classes have been removed entirely, they
existed to model ownership within RuntimeDyld, and so are no longer needed.
(3) RuntimeDyld::loadObject now returns an instance of a new class,
RuntimeDyld::LoadedObjectInfo, which can be used to construct a modified
object suitable for registration with the debugger, following the existing
debugger registration scheme.
(4) The JITRegistrar class has been removed, and the GDBRegistrar class has been
re-written as a JITEventListener.
This should fix http://llvm.org/PR20722 .
llvm-svn: 222810
Summary:
Fixed all of the missing endian conversions that Lang Hames and I identified in
RuntimeDyldMachOARM.h.
Fixed the opcode emission in RuntimeDyldImpl::createStubFunction() for AArch64,
ARM, Mips when the host endian doesn't match the target endian.
PowerPC will need changing if it's opcodes are affected by endianness but I've
left this for now since I'm unsure if this is the case and it's the only path
that specifies the target endian.
This patch fixes MachO_ARM_PIC_relocations.s on a big-endian Mips host. This
is the last of the known issues on this host.
Reviewers: lhames
Reviewed By: lhames
Subscribers: aemerson, llvm-commits
Differential Revision: http://reviews.llvm.org/D6130
llvm-svn: 221446
There are two methods in SectionRef that can fail:
* getName: The index into the string table can be invalid.
* getContents: The section might point to invalid contents.
Every other method will always succeed and returning and std::error_code just
complicates the code. For example, a section can have an invalid alignment,
but if we are able to get to the section structure at all and create a
SectionRef, we will always be able to read that invalid alignment.
llvm-svn: 219314
I'm not sure this is a particularly helpful API (to pass ownership and
then return it unconditionally) rather than just pass the underlying
object by non-const reference, but this was the original API so I'll
just make it more safe/stable and anyone else is free to adjust that at
their whim, of course.
llvm-svn: 217081
The syntax of the new builtin is 'section_addr(<filename>, <section-name>)'
(similar to the stub_addr builtin, but without a symbol name). It returns the
base address of the given section in the given object file. This builtin makes
it possible to refer to the contents of sections that cannot contain symbols,
e.g. sections added by the linker itself, like __eh_frame.
llvm-svn: 217010
Having both Triple::arm64 and Triple::aarch64 is extremely confusing, and
invites bugs where only one is checked. In reality, the only legitimate
difference between the two (arm64 usually means iOS) is also present in the OS
part of the triple and that's what should be checked.
We still parse the "arm64" triple, just canonicalise it to Triple::aarch64, so
there aren't any LLVM-side test changes.
llvm-svn: 213743
There's no reason to restrict this particular piece of RuntimeDyldChecker
functionality to +Asserts builds.
This should fix failures in MachO_x86-64_PIC_relocations.s on release bots.
llvm-svn: 213708
This patch introduces a 'stub_addr' builtin that can be used to find the address
of the stub for a given (<file>, <section>, <symbol>) tuple. This address can be
used both to verify the contents of stubs (by loading from the returned address)
and to verify references to stubs (by comparing against the returned address).
Example (1) - Verifying stub contents:
Load 8 bytes (assuming a 64-bit target) from the stub for 'x' in the __text
section of f.o, and compare that value against the addres of 'x'.
# rtdyld-check: *{8}(stub_addr(f.o, __text, x) = x
Example (2) - Verifying references to stubs:
Decode the immediate of the instruction at label 'l', and verify that it's
equal to the offset from the next instruction's PC to the stub for 'y' in the
__text section of f.o (i.e. it's the correct PC-rel difference).
# rtdyld-check: decode_operand(l, 4) = stub_addr(f.o, __text, y) - next_pc(l)
l:
movq y@GOTPCREL(%rip), %rax
Since stub inspection requires cooperation with RuntimeDyldImpl this patch
pimpl-ifies RuntimeDyldChecker. Its implementation is moved in to a new class,
RuntimeDyldCheckerImpl, that has access to the definition of RuntimeDyldImpl.
llvm-svn: 213698
This patch enables the new ELFv2 ABI in the runtime dynamic loader.
The loader has to implement the following features:
- In the ELFv2 ABI, do not look up a function descriptor in .opd, but
instead use the local entry point when resolving a direct call.
- Update the TOC restore code to use the new TOC slot linkage area
offset.
- Create PLT stubs appropriate for the ELFv2 ABI.
Note that this patch also adds common-code changes. These are necessary
because the loader must check the newly added ELF flags: the e_flags
header bits encoding the ABI version, and the st_other symbol table
entry bits encoding the local entry point offset. There is currently
no way to access these, so I've added ObjectFile::getPlatformFlags and
SymbolRef::getOther accessors.
Reviewed by Hal Finkel.
llvm-svn: 213491
The previous implementation of RuntimeDyldMachO mixed logic for all targets
within a single class, creating problems for readability, maintainability, and
performance. To address these issues, this patch strips the RuntimeDyldMachO
class down to just target-independent functionality, and moves all
target-specific functionality into target-specific subclasses RuntimeDyldMachO.
The new class hierarchy is as follows:
class RuntimeDyldMachO
Implemented in RuntimeDyldMachO.{h,cpp}
Contains logic that is completely independent of the target. This consists
mostly of MachO helper utilities which the derived classes use to get their
work done.
template <typename Impl>
class RuntimeDyldMachOCRTPBase<Impl> : public RuntimeDyldMachO
Implemented in RuntimeDyldMachO.h
Contains generic MachO algorithms/data structures that defer to the Impl class
for target-specific behaviors.
RuntimeDyldMachOARM : public RuntimeDyldMachOCRTPBase<RuntimeDyldMachOARM>
RuntimeDyldMachOARM64 : public RuntimeDyldMachOCRTPBase<RuntimeDyldMachOARM64>
RuntimeDyldMachOI386 : public RuntimeDyldMachOCRTPBase<RuntimeDyldMachOI386>
RuntimeDyldMachOX86_64 : public RuntimeDyldMachOCRTPBase<RuntimeDyldMachOX86_64>
Implemented in their respective *.h files in lib/ExecutionEngine/RuntimeDyld/MachOTargets
Each of these contains the relocation logic specific to their target architecture.
llvm-svn: 213293
