`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
Fix SelectionDAG::computeKnownBits asserting when handling EXTRACT_SUBVECTOR
when zero extending the demanded elements mask if it is already as long as the
source vector.
Differential Revision: https://reviews.llvm.org/D49574
llvm-svn: 339600
Add a parameter for testing specifically for
sNaNs - at least one instruction pattern on AMDGPU
needs to check specifically for this.
Also handle more cases, and add a target hook
for custom nodes, similar to the hooks for known
bits.
llvm-svn: 338910
There is nothing x86-specific about this code, so it'd be nice to make this available for other targets to use in the future (and get it out of X86ISelLowering!).
Differential Revision: https://reviews.llvm.org/D50083
llvm-svn: 338586
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
llvm-svn: 338069
This allows us to use SelectionDAG::isKnownNeverZero in DAGCombiner::visitREM (visitSDIVLike/visitUDIVLike handle the checking for constants).
llvm-svn: 336779
This is similar to what is done for binops. I don't know if this would have helped us catch the bug fixed in r336566 earlier or not, but I figured it couldn't hurt.
llvm-svn: 336576
Splits off isKnownNeverZeroFloat to handle +/- 0 float cases.
This will make it easier to be more aggressive with the integer isKnownNeverZero tests (similar to ValueTracking), use computeKnownBits etc.
Differential Revision: https://reviews.llvm.org/D48969
llvm-svn: 336492
This removes debug locations from ConstantSDNode and ConstantSDFPNode.
When this kind of node is materialized we no longer create a line table
entry which jumps back to the constant's first point of use. This makes
single-stepping behavior smoother, and it matches the model used by IR,
where Constants have no locations. See this thread for more context:
http://lists.llvm.org/pipermail/llvm-dev/2018-June/124164.html
I'd like to handle constant BuildVectorSDNodes and to try to eliminate
passing SDLocs to SelectionDAG::getConstant*() in follow-up commits.
Differential Revision: https://reviews.llvm.org/D48468
llvm-svn: 335497
Summary: This patch originated from D46562 and is a proper subset, with some issues addressed.
Reviewers: spatel, hfinkel, wristow, arsenm, javed.absar
Reviewed By: spatel
Subscribers: wdng, nhaehnle
Differential Revision: https://reviews.llvm.org/D47909
llvm-svn: 334996
Summary: This change uses fmf subflags to guard fma optimizations as well as unsafe. These changes originated from D46483 and have been simplified via getNode.
Reviewers: spatel, arsenm, hfinkel, javed.absar
Reviewed By: spatel
Subscribers: nemanjai, wdng
Differential Revision: https://reviews.llvm.org/D47388
llvm-svn: 334242
Summary: This change uses fmf subflags to guard optimizations as well as unsafe. These changes originated from D46483.
Reviewers: spatel, hfinkel
Reviewed By: spatel
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D47389
llvm-svn: 334037
This is the FP sibling of D43141 with the corresponding IR change in rL327212.
We can't propagate undef here because if a variable operand is a NaN, these
binops must propagate NaN. Neither global nor node-level fast-math makes a
difference. If we have 'nnan', I think later folds can turn the NaN into undef.
The tests in X86/fp-undef.ll are meant to be the definitive verification for
these folds - everything reduces identically now.
The other test changes are collateral damage. They may need to be altered to
preserve their intent.
Differential Revision: https://reviews.llvm.org/D47026
llvm-svn: 332920
Keep loads and stores together (target defines how many loads
and stores to gang up), such that it will help in pairing
and vectorization.
Differential Revision https://reviews.llvm.org/D46477
llvm-svn: 332482
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
In order to convert LLVM IR to MachineInstr, we need a new TargetOpcode,
DBG_LABEL, to ‘lower’ intrinsic llvm.dbg.label. The patch
creates this new TargetOpcode and convert intrinsic llvm.dbg.label to
MachineInstr through SelectionDAG.
In SelectionDAG, debug information is stored in SDDbgInfo. We create a
new data member of SDDbgInfo for labels and use the new data member,
SDDbgLabel, to create DBG_LABEL MachineInstr.
The new DBG_LABEL MachineInstr uses label metadata from LLVM IR as its
parameter. So, the backend could get metadata information of labels from
DBG_LABEL MachineInstr.
Differential Revision: https://reviews.llvm.org/D45341
Patch by Hsiangkai Wang.
llvm-svn: 331842
Summary:
getNode optimizes (ext (trunc x)) to x and the dbgvalue node on trunc is lost. The fix calls transferDbgValues to add the dbgvalue to x.
Add DebugInfo/AArch64/dbg-value-i16.ll
Patch by Sejong Oh!
Reviewers: aprantl, javed.absar, llvm-commits, vsk
Reviewed By: aprantl, vsk
Subscribers: kristof.beyls, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46348
llvm-svn: 331665
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
Summary:
This just refactors the lowering of the atomic memory intrinsics to more
closely match the code patterns used in the lowering of the non-atomic
memory intrinsics. Specifically, we encapsulate the lowering in
SelectionDAG::getAtomicMem*() functions rather than embedding
the code directly in the SelectionDAGBuilder code.
llvm-svn: 330603
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
llvm-svn: 329435
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
The BITCAST handling in computeKnownBits() previously only worked for little
endian.
This patch reverses the iteration over elements for a big endian target which
allows this to work in this case also.
SystemZ test case.
Review: Eli Friedman
https://reviews.llvm.org/D44249
llvm-svn: 327764
The code to match and produce more x86 vector blends was enabled for all
architectures even though the transform may pessimize the code for other
architectures that do not provide a vector blend instruction.
Added an aarch64 testcase to check that a VZIP instruction is generated instead
of byte movs.
Differential Revision: https://reviews.llvm.org/D44118
llvm-svn: 327132
This allows us to improve vector constant matching in more DAG code (backends, TargetLowering etc.).
Differential Revision: https://reviews.llvm.org/D43466
llvm-svn: 325815
If we have a clamp pattern, SMIN(SMAX(X, LO),HI) or SMAX(SMIN(X, HI),LO) then we can deduce that the number of signbits (zeros/ones) will be at least the minimum of the LO and HI constants.
ComputeKnownBits equivalent of D43338.
Differential Revision: https://reviews.llvm.org/D43463
llvm-svn: 325521
If we have a clamp pattern, SMIN(SMAX(X, LO),HI) or SMAX(SMIN(X, HI),LO) then we can deduce that the number of signbits will be at least the minimum of the LO and HI constants.
I haven't bothered with the UMIN/UMAX equivalent as (1) we don't have any current use cases and (2) I wonder if we'd be better off immediately falling back for ComputeKnownBits for UMIN/UMAX which already has optimization patterns useful for unsigned cases.
Differential Revision: https://reviews.llvm.org/D43338
llvm-svn: 325450
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
The bug has been lying dormant, but apparently was never exposed, until
after rL324941 because we didn't return the correct result
for shifts with undef operands.
llvm-svn: 325010
This started by noticing that scalar and vector types were producing different results with div ops in PR36305:
https://bugs.llvm.org/show_bug.cgi?id=36305
...but the problem is bigger. I couldn't keep it straight without a table, so I'm attaching that as a PDF to
the review. The x86 tests in undef-ops.ll correspond to that table.
Green means that instsimplify and the DAG agree on the result for all types.
Red means the DAG was returning undef when IR was not.
Yellow means the DAG was returning a non-undef result when IR returned undef.
This patch assumes that we're currently doing the right thing in IR.
Note: I couldn't find any problems with lowering vector constants as the code comments were warning,
but those comments were written long ago in rL36413 .
Differential Revision: https://reviews.llvm.org/D43141
llvm-svn: 324941
Armv8.1-A added an atomic load-clear instruction (which performs bitwise
and with the complement of it's operand), but not a load-and
instruction. Our current code-generation for atomic load-and always
inserts an MVN instruction to invert its argument, even if it could be
folded into a constant or another instruction.
This adds lowering early in selection DAG to convert a load-and
operation into an xor with -1 and a load-clear, allowing the normal DAG
optimisations to work on it.
To do this, I've had to add a new ISD opcode, ATOMIC_LOAD_CLR. I don't
see any easy way to do this with an AArch64-specific ISD node, because
the code-generation for atomic operations assumes the SDNodes are of
type AtomicSDNode.
I've left the old tablegen patterns in because they are still needed for
global isel.
Differential revision: https://reviews.llvm.org/D42478
llvm-svn: 324908
Many in SimplifySetCC and FoldSetCC try to create true or false constants. Some of them query getBooleanContents to figure out whether to use all ones or just 1 for true. But many places do not check and just use 1 without ensuring the VT has an i1 scalar type. Note sure if those places only trigger before type legalization so they only see an i1
type?
To cleanup the inconsistency and reduce some duplicated code, this patch adds a getBoolConstant method to SelectionDAG that takes are of querying getBooleanContents and doing the right thing.
Differential Revision: https://reviews.llvm.org/D43037
llvm-svn: 324634
Better to assume that any value type may be commuted, not just MVTs.
No test case right now, but discovered while investigating possible shuffle combines.
llvm-svn: 324179
When getNode() is called to create an EXTRACT_VECTOR_ELT, assert that
the result VT is at least as wide as the vector element type.
Review: Eli Friedman
llvm-svn: 324061
The second return value of ATOMIC_CMP_SWAP_WITH_SUCCESS is known to be a
boolean, and should therefore be treated by computeKnownBits just like
the second return values of SMULO / UMULO.
Differential Revision: https://reviews.llvm.org/D42067
llvm-svn: 322985
Currently we infer the scale at isel time by analyzing whether the base is a constant 0 or not. If it is we assume scale is 1, else we take it from the element size of the pass thru or stored value. This seems a little weird and I think it makes more sense to make it explicit in the DAG rather than doing tricky things in the backend.
Most of this patch is just making sure we copy the scale around everywhere.
Differential Revision: https://reviews.llvm.org/D40055
llvm-svn: 322210
Ingredients in this patch:
1. Add HANDLE_LIBCALL defs for finite mathlib functions that correspond to LLVM intrinsics.
2. Plumbing to send TargetLibraryInfo down to SelectionDAGLegalize.
3. Relaxed math and library checking in SelectionDAGLegalize::ConvertNodeToLibcall() to choose finite libcalls.
There was a bug about determining the availability of the finite calls that should be fixed with:
rL322010
Not in this patch:
This doesn't resolve the question/bug of clang creating the intrinsic IR in the first place.
There's likely follow-up work needed to support the long double variants better.
There's room for improvement to reduce the code duplication.
Create finite calls that don't originate from a corresponding intrinsic or DAG node?
Differential Revision: https://reviews.llvm.org/D41338
llvm-svn: 322087
Handle this in DAGCombiner::visitEXTRACT_VECTOR_ELT the same as we already do in SelectionDAG::getNode and use APInt instead of getZExtValue.
This should also fix oss-fuzz #4910
llvm-svn: 321767
