Currently emit error for uses_allocators(alloc(traits)):
called object type 'omp_allocator_handle_t' (aka
'enum omp_allocator_handle_t') is not a function or function pointer
To fix this, since "alloc" is Id expresison(spce 5.2), during the parser
(in ParseOpenMP.cpp), using tryParseCXXIdExpression instead of
ParseExpression for C.
Differential Revision: https://reviews.llvm.org/D151517
Sema.h is huge. This makes a small reduction to it by moving
EnterExpressionEvaluationContext into a new header, since it is an
independent component.
Differential Revision: https://reviews.llvm.org/D149796
Code generation support for 'parallel masked' directive.
The `EmitOMPParallelMaskedDirective` was implemented.
In addition, the appropiate device functions were added.
Fix#59939.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D143527
Dynamic memory allows users to allocate fast shared memory when a kernel
is launched. We support a single size for all kernels via the
`LIBOMPTARGET_SHARED_MEMORY_SIZE` environment variable but now we can
control it per kernel invocation, hence allow computed values.
Note: Only the nextgen plugins will allocate memory based on the clause,
the old plugins will silently miscompile.
Differential Revision: https://reviews.llvm.org/D141233
std::optional::value() has undesired exception checking semantics and is
unavailable in older Xcode (see _LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS). The
call sites block std::optional migration.
This makes `ninja clang` work in the absence of llvm::Optional::value.
This patch gives basic parsing and semantic support for "modifiers" of order clause introduced in OpenMP 5.1 ( section 2.11.3 )
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D127855
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
We would previously reject valid input where GNU attributes preceded the
standard attributes on top-level declarations. A previous attribute
handling change had begun rejecting this whilst GCC does honour this
layout. In practice, this breaks use of `extern "C"` attributed
functions which use both standard and GNU attributes as experienced by
the Swift runtime.
Objective-C deserves an honourable mention for requiring some additional
special casing. Because attributes on declarations and definitions
differ in semantics, we need to replicate some of the logic for
detecting attributes to declarations to which they appertain cannot be
attributed. This should match the existing case for the application of
GNU attributes to interfaces, protocols, and implementations.
Take the opportunity to split out the tooling tests into two cases: ones
which process macros and ones which do not.
Special thanks to Aaron Ballman for the many hints and extensive rubber
ducking that was involved in identifying the various places where we
accidentally dropped attributes.
Differential Revision: https://reviews.llvm.org/D137979Fixes: #58229
Reviewed By: aaron.ballman, arphaman
This patch gives basic parsing and semantic analysis support for 'strict'
modifier with 'num_tasks' clause of 'taskloop' construct introduced in
OpenMP 5.1 (section 2.12.2)
Differential Revision: https://reviews.llvm.org/D138328
This patch gives basic parsing and semantic analysis support for 'strict'
modifier with 'grainsize' clause of 'taskloop' construct introduced in
OpenMP 5.1 (section 2.12.2)
Differential Revision: https://reviews.llvm.org/D138217
Error directive is allowed in both declared and executable contexts.
The function ActOnOpenMPAtClause is called in both places during the
parsers.
Adding a param "bool InExContext" to identify context which is used to
emit error massage.
Differential Revision: https://reviews.llvm.org/D137851
In preparation for allowing the prefer_type list in the append_args clause,
use the OMPInteropInfo in the attribute for 'declare variant'.
This requires adding a new Argument kind to the attribute code. This change
adds a specific attribute to pass an array of OMPInteropInfo. It implements
new tablegen needed to handle the interop-type part of the structure. When
prefer_type is added, more work will be needed to dump, instantiate, and
serialize the PreferTypes field in OMPInteropInfo.
Differential Revision: https://reviews.llvm.org/D132270
The 'init' clause allows an interop-modifier of prefer_type(list) and
and interop-types 'target' and 'targetsync'.
The 'append_args' clause uses an append-op that also includes
interop-types ('target' and 'targetsync') and will allow
a prefer_type list in the next OpenMP version.
This change adds a helper struct OMPInteropInfo and uses it in the parsing
of both the 'init' and 'append_args' clauses.
One OMPInteropInfo object represents the info in a single 'init' clause.
Since 'append_args' allows a variable number of interop items it will
require an array of OMPInteropInfo objects once that is supported.
Differential Revision: https://reviews.llvm.org/D132171
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
This patch adds a new extension to the `omp begin / end declare variant`
support that causes it to apply to function declarations as well. This
is explicitly not done in the standard, but can be useful in some
situations so we should provide it as an extension. This will allow us
to uniquely bind and overload existing definitions with a simple
declaration using variants.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D124624
This patch gives basic parsing and semantic support for
"masked taskloop simd" construct introduced in OpenMP 5.1 (section 2.16.8)
Differential Revision: https://reviews.llvm.org/D128693
This patch gives basic parsing and semantic support for "masked taskloop"
construct introduced in OpenMP 5.1 (section 2.16.7)
Differential Revision: https://reviews.llvm.org/D128478
For backwards compatiblity, we emit only a warning instead of an error if the
attribute is one of the existing type attributes that we have historically
allowed to "slide" to the `DeclSpec` just as if it had been specified in GNU
syntax. (We will call these "legacy type attributes" below.)
The high-level changes that achieve this are:
- We introduce a new field `Declarator::DeclarationAttrs` (with appropriate
accessors) to store C++11 attributes occurring in the attribute-specifier-seq
at the beginning of a simple-declaration (and other similar declarations).
Previously, these attributes were placed on the `DeclSpec`, which made it
impossible to reconstruct later on whether the attributes had in fact been
placed on the decl-specifier-seq or ahead of the declaration.
- In the parser, we propgate declaration attributes and decl-specifier-seq
attributes separately until we can place them in
`Declarator::DeclarationAttrs` or `DeclSpec::Attrs`, respectively.
- In `ProcessDeclAttributes()`, in addition to processing declarator attributes,
we now also process the attributes from `Declarator::DeclarationAttrs` (except
if they are legacy type attributes).
- In `ConvertDeclSpecToType()`, in addition to processing `DeclSpec` attributes,
we also process any legacy type attributes that occur in
`Declarator::DeclarationAttrs` (and emit a warning).
- We make `ProcessDeclAttribute` emit an error if it sees any non-declaration
attributes in C++11 syntax, except in the following cases:
- If it is being called for attributes on a `DeclSpec` or `DeclaratorChunk`
- If the attribute is a legacy type attribute (in which case we only emit
a warning)
The standard justifies treating attributes at the beginning of a
simple-declaration and attributes after a declarator-id the same. Here are some
relevant parts of the standard:
- The attribute-specifier-seq at the beginning of a simple-declaration
"appertains to each of the entities declared by the declarators of the
init-declarator-list" (https://eel.is/c++draft/dcl.dcl#dcl.pre-3)
- "In the declaration for an entity, attributes appertaining to that entity can
appear at the start of the declaration and after the declarator-id for that
declaration." (https://eel.is/c++draft/dcl.dcl#dcl.pre-note-2)
- "The optional attribute-specifier-seq following a declarator-id appertains to
the entity that is declared."
(https://eel.is/c++draft/dcl.dcl#dcl.meaning.general-1)
The standard contains similar wording to that for a simple-declaration in other
similar types of declarations, for example:
- "The optional attribute-specifier-seq in a parameter-declaration appertains to
the parameter." (https://eel.is/c++draft/dcl.fct#3)
- "The optional attribute-specifier-seq in an exception-declaration appertains
to the parameter of the catch clause" (https://eel.is/c++draft/except.pre#1)
The new behavior is tested both on the newly added type attribute
`annotate_type`, for which we emit errors, and for the legacy type attribute
`address_space` (chosen somewhat randomly from the various legacy type
attributes), for which we emit warnings.
Depends On D111548
Reviewed By: aaron.ballman, rsmith
Differential Revision: https://reviews.llvm.org/D126061
This is a support for " #pragma omp atomic compare fail ". It has Parser & AST support for now.
Reviewed By: tianshilei1992
Differential Revision: https://reviews.llvm.org/D123235
Adds support for the reserved locator 'omp_all_memory' for use
in depend clauses with 'out' or 'inout' dependence-types.
Differential Revision: https://reviews.llvm.org/D125828
Adds basic parsing/sema/serialization support for the
#pragma omp target parallel loop directive.
Differential Revision: https://reviews.llvm.org/D122359
Move the SourceRange from the old ParsedAttributesWithRange into
ParsedAttributesView, so we have source range information available
everywhere we use attributes.
This also removes ParsedAttributesWithRange (replaced by simply using
ParsedAttributes) and ParsedAttributesVieWithRange (replaced by using
ParsedAttributesView).
Differential Revision: https://reviews.llvm.org/D121201
