There seems to be an impedance mismatch between what the type
system considers an aggregate (structs and arrays) and what
constants consider an aggregate (structs, arrays and vectors).
Adjust the type check to consider vectors as well. The previous
version of the patch dropped the type check entirely, but it
turns out that getAggregateElement() does require the constant
to be an aggregate in some edge cases: For Poison/Undef the
getNumElements() API is called, without checking in advance that
we're dealing with an aggregate. Possibly the implementation should
avoid doing that, but for now I'm adding an assert so the next
person doesn't fall into this trap.
Do constant folding according to
posion * C -> poison
C * poison -> poison
undef * C -> 0
C * undef -> 0
for smul_fix and smul_fix_sat intrinsics (for any scale).
Reviewed By: nikic, aqjune, nagisa
Differential Revision: https://reviews.llvm.org/D98410
There seems to be an impedance mismatch between what the type
system considers an aggregate (structs and arrays) and what
constants consider an aggregate (structs, arrays and vectors).
Rather than adjusting the type check, simply drop it entirely,
as getAggregateElement() is well-defined for non-aggregates: It
simply returns null in that case.
Similar to the Arm VCTP intrinsics, if the operands of an
active.lane.mask are both known, the constant lane mask can be
calculated. This can come up after unrolling the loops.
Differential Revision: https://reviews.llvm.org/D94103
The x86_amx is used for AMX intrisics. <256 x i32> is bitcast to x86_amx when
it is used by AMX intrinsics, and x86_amx is bitcast to <256 x i32> when it
is used by load/store instruction. So amx intrinsics only operate on type x86_amx.
It can help to separate amx intrinsics from llvm IR instructions (+-*/).
Thank Craig for the idea. This patch depend on https://reviews.llvm.org/D87981.
Differential Revision: https://reviews.llvm.org/D91927
The `dso_local_equivalent` constant is a wrapper for functions that represents a
value which is functionally equivalent to the global passed to this. That is, if
this accepts a function, calling this constant should have the same effects as
calling the function directly. This could be a direct reference to the function,
the `@plt` modifier on X86/AArch64, a thunk, or anything that's equivalent to the
resolved function as a call target.
When lowered, the returned address must have a constant offset at link time from
some other symbol defined within the same binary. The address of this value is
also insignificant. The name is leveraged from `dso_local` where use of a function
or variable is resolved to a symbol in the same linkage unit.
In this patch:
- Addition of `dso_local_equivalent` and handling it
- Update Constant::needsRelocation() to strip constant inbound GEPs and take
advantage of `dso_local_equivalent` for relative references
This is useful for the [Relative VTables C++ ABI](https://reviews.llvm.org/D72959)
which makes vtables readonly. This works by replacing the dynamic relocations for
function pointers in them with static relocations that represent the offset between
the vtable and virtual functions. If a function is externally defined,
`dso_local_equivalent` can be used as a generic wrapper for the function to still
allow for this static offset calculation to be done.
See [RFC](http://lists.llvm.org/pipermail/llvm-dev/2020-August/144469.html) for more details.
Differential Revision: https://reviews.llvm.org/D77248
The output here may not be optimal (yet), but it should be
consistent for commuted operands (it was not before) and
correct. We can do better by checking FMF and NaN if needed.
Code in InstSimplify generally assumes that we have already
folded code like this, so it was not handling 2 constant
inputs by commuting consistently.
Constant fold both the trapping and saturating versions of the
WebAssembly truncation intrinsics. The tests are adapted from the
WebAssembly spec tests for the corresponding instructions.
Requested in PR46982.
Differential Revision: https://reviews.llvm.org/D85392
This is a simple patch that adds constant folding for freeze
instruction.
IIUC, it isn't needed to update ConstantFold.cpp because there is no freeze
constexpr.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D84597
We can sometimes get into the situation where the operand to a vctp
intrinsic becomes constant, such as after a loop is fully unrolled. This
adds the constant folding needed for them, allowing them to simplify
away and hopefully simplifying remaining instructions.
Differential Revision: https://reviews.llvm.org/D84110
The getAllOnesValue can only handle things that are bitcast from a
ConstantInt, while here we bitcast through a pointer, so we may see more
complex objects (like Array or Struct).
Differential Revision: https://reviews.llvm.org/D83870
Here we teach the ConstantFolding analysis pass that it is not legal to
replace a load of a bitcast constant (having a non-integral addrspace)
with a bitcast of the value of that constant (with a different
non-integral addrspace).
But also teach it that certain bit patterns are always known and
convertable (a fact it already uses elsewhere). This required us to also
fix a globalopt test, since, after this change, LLVM is able to realize
that the test actually is a valid transform (NULL is always a known
bit-pattern) and so it doesn't need to emit the failure remarks for it.
Also simplify some of the negative tests for transforms by avoiding a
type change in their bitcast, and add positive versions of the same
tests, to show that they otherwise should work.
Differential Revision: https://reviews.llvm.org/D59730
Summary:
Move the bail out logic to before constructing the Result and Lane
vectors. This is both potentially faster, and avoids calling
getNumElements on a potentially scalable vector
Reviewers: efriedma, sunfish, chandlerc, c-rhodes, fpetrogalli
Reviewed By: fpetrogalli
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81619
This add constant folding for all the integer vector reduce intrinsics,
providing that the argument is a constant vector. zeroinitializer always
produces 0 for all intrinsics, and other values can be handled with
APInt operators.
Differential Revision: https://reviews.llvm.org/D80516
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
This really belongs in InstructionSimplify since it doesn't introduce
new instructions. Put it in instcombine to avoid increasing the number
of passes considering target intrinsics.
I also noticed that we seem to now be interpreting strictfp attributes
on call sites, so try to handle that.
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: sunfish, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77273
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
This change implements constant folding to constrained versions of
intrinsics, implementing rounding: floor, ceil, trunc, round, rint and
nearbyint.
Differential Revision: https://reviews.llvm.org/D72930
Summary:
The method is used where TypeSize is implicitly cast to integer for
being checked against 0.
Reviewers: sdesmalen, efriedma
Reviewed By: sdesmalen, efriedma
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76748
Spin-off from D75407. As described there, ConstantFoldConstant()
currently returns null for non-ConstantExpr/ConstantVector inputs,
but otherwise always returns non-null, independently of whether
any folding has happened or not.
This is confusing and makes consumer code more complicated.
I would expect either that ConstantFoldConstant() returns only if
it actually folded something, or that it always returns non-null.
I'm going to the latter possibility here, which appears to be more
useful considering existing usage.
Differential Revision: https://reviews.llvm.org/D75543
Relative to the original commit, this fixes some warnings,
and is based on the deletion of the IRBuilder copy constructor
in D74693. The automatic copy constructor would no longer be
safe.
-----
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Related llvm-dev thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/138951.html
This patch moves the IRBuilder from templating over the constant
folder and inserter towards making both of these virtual.
There are a couple of motivations for this:
1. It's not possible to share code between use-sites that use
different IRBuilder folders/inserters (short of templating the code
and moving it into headers).
2. Methods currently defined on IRBuilderBase (which is not templated)
do not use the custom inserter, resulting in subtle bugs (e.g.
incorrect InstCombine worklist management). It would be possible to
move those into the templated IRBuilder, but...
3. The vast majority of the IRBuilder implementation has to live
in the header, because it depends on the template arguments.
4. We have many unnecessary dependencies on IRBuilder.h,
because it is not easy to forward-declare. (Significant parts of
the backend depend on it via TargetLowering.h, for example.)
This patch addresses the issue by making the following changes:
* IRBuilderDefaultInserter::InsertHelper becomes virtual.
IRBuilderBase accepts a reference to it.
* IRBuilderFolder is introduced as a virtual base class. It is
implemented by ConstantFolder (default), NoFolder and TargetFolder.
IRBuilderBase has a reference to this as well.
* All the logic is moved from IRBuilder to IRBuilderBase. This means
that methods can in the future replace their IRBuilder<> & uses
(or other specific IRBuilder types) with IRBuilderBase & and thus
be usable with different IRBuilders.
* The IRBuilder class is now a thin wrapper around IRBuilderBase.
Essentially it only stores the folder and inserter and takes care
of constructing the base builder.
What this patch doesn't do, but should be simple followups after this change:
* Fixing use of the inserter for creation methods originally defined
on IRBuilderBase.
* Replacing IRBuilder<> uses in arguments with IRBuilderBase, where useful.
* Moving code from the IRBuilder header to the source file.
From the user perspective, these changes should be mostly transparent:
The only thing that consumers using a custom inserted may need to do is
inherit from IRBuilderDefaultInserter publicly and mark their InsertHelper
as public.
Differential Revision: https://reviews.llvm.org/D73835
Summary:
Bail out early for scalable vectors. As global variables are not expected
to be scalable.
Use explicit call of getFixedSize() to assert on places where scalable size
doesn't make sense.
Reviewers: sdesmalen, efriedma, apazos, huntergr, willlovett
Reviewed By: sdesmalen
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74424
With the fixed implementation of the "remainder" operation in
rG9d0956ebd471, we can now add support to folding calls to it.
Differential Revision: https://reviews.llvm.org/D69777
