This allows for dialects to do different post-processing depending on operations with the inliner (my use case requires different attribute propagation rules depending on call op). This hook runs before the regular processInlinedBlocks method.
Differential Revision: https://reviews.llvm.org/D104399
This revision allows for attaching "debug labels" to patterns, and provides to FrozenRewritePatternSet for filtering patterns based on these labels (in addition to the debug name of the pattern). This will greatly simplify the ability to write tests targeted towards specific patterns (in cases where many patterns may interact), will also simplify debugging pattern application by observing how application changes when enabling/disabling specific patterns.
To enable better reuse of pattern rewrite options between passes, this revision also adds a new PassUtil.td file to the Rewrite/ library that will allow for passes to easily hook into a common interface for pattern debugging. Two options are used to seed this utility, `disable-patterns` and `enable-patterns`, which are used to enable the filtering behavior indicated above.
Differential Revision: https://reviews.llvm.org/D102441
* A Reducer is a kind of RewritePattern, so it's just the same as
writing graph rewrite.
* ReductionTreePass operates on Operation rather than ModuleOp, so that
* we are able to reduce a nested structure(e.g., module in module) by
* self-nesting.
Reviewed By: jpienaar, rriddle
Differential Revision: https://reviews.llvm.org/D101046
* Add `hasCanonicalizer` option to Dialect.
* Initialize canonicalizer with dialect-wide canonicalization patterns.
* Add test case to TestDialect.
Dialect-wide canonicalization patterns are useful if a canonicalization pattern does not conceptually associate with any single operation, i.e., it should not be registered as part of an operation's `getCanonicalizationPatterns` function. E.g., this is the case for canonicalization patterns that match an op interface.
Differential Revision: https://reviews.llvm.org/D103226
Original interfaces are not safe to be called during dialect conversion.
This is because some ops (e.g. `dynamic_reshape(input, target_shape)`)
depend on the values of their operands to calculate the output shape.
However the operands may be out of reach during dialect conversion (e.g.
converting from tensor world to buffer world). This patch provides a new
kind of interface which accpets user-provided operands to solve this
problem.
Reviewed By: herhut
Differential Revision: https://reviews.llvm.org/D102317
A new `InterfaceMethod` is added to `InferShapedTypeOpInterface` that
allows an operation to return the `Value`s for each dim of its
results. It is intended for the case where the `Value` returned for
each dim is computed using the operands and operation attributes. This
interface method is for cases where the result dim of an operation can
be computed independently, and it avoids the need to aggregate all
dims of a result into a single shape value. This also implies that
this is not suitable for cases where the result type is unranked (for
which the existing interface methods is to be used).
Also added is a canonicalization pattern that uses this interface and
resolves the shapes of the output in terms of the shapes of the
inputs. Moving Linalg ops to use this interface, so that many
canonicalization patterns implemented for individual linalg ops to
achieve the same result can be removed in favor of the added
canonicalization pattern.
Differential Revision: https://reviews.llvm.org/D97887
In particular for Graph Regions, the terminator needs is just a
historical artifact of the generalization of MLIR from CFG region.
Operations like Module don't need a terminator, and before Module
migrated to be an operation with region there wasn't any needed.
To validate the feature, the ModuleOp is migrated to use this trait and
the ModuleTerminator operation is deleted.
This patch is likely to break clients, if you're in this case:
- you may iterate on a ModuleOp with `getBody()->without_terminator()`,
the solution is simple: just remove the ->without_terminator!
- you created a builder with `Builder::atBlockTerminator(module_body)`,
just use `Builder::atBlockEnd(module_body)` instead.
- you were handling ModuleTerminator: it isn't needed anymore.
- for generic code, a `Block::mayNotHaveTerminator()` may be used.
Differential Revision: https://reviews.llvm.org/D98468
This mechanism makes it possible for a dialect to not register all
operations but still answer interface-based queries.
This can useful for dialects that are "open" or connected to an external
system and still interoperate with the compiler. It can also open up the
possibility to have a more extensible compiler at runtime: the compiler
does not need a pre-registration for each operation and the dialect can
inject behavior dynamically.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D93085
This doesn't change APIs, this just cleans up the many in-tree uses of these
names to use the new preferred names. We'll keep the old names around for a
couple weeks to help transitions.
Differential Revision: https://reviews.llvm.org/D99127
This allows for storage instances to store data that isn't uniqued in the context, or contain otherwise non-trivial logic, in the rare situations that they occur. Storage instances with trivial destructors will still have their destructor skipped. A consequence of this is that the storage instance definition must be visible from the place that registers the type.
Differential Revision: https://reviews.llvm.org/D98311
Data layout information allows to answer questions about the size and alignment
properties of a type. It enables, among others, the generation of various
linear memory addressing schemes for containers of abstract types and deeper
reasoning about vectors. This introduces the subsystem for modeling data
layouts in MLIR.
The data layout subsystem is designed to scale to MLIR's open type and
operation system. At the top level, it consists of attribute interfaces that
can be implemented by concrete data layout specifications; type interfaces that
should be implemented by types subject to data layout; operation interfaces
that must be implemented by operations that can serve as data layout scopes
(e.g., modules); and dialect interfaces for data layout properties unrelated to
specific types. Built-in types are handled specially to decrease the overall
query cost.
A concrete default implementation of these interfaces is provided in the new
Target dialect. Defaults for built-in types that match the current behavior are
also provided.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D97067
The support for attributes closely maps that of Types (basically 1-1) given that Attributes are defined in exactly the same way as Types. All of the current ODS TypeDef classes get an Attr equivalent. The generation of the attribute classes themselves share the same generator as types.
Differential Revision: https://reviews.llvm.org/D97589
'getAttrs' has been explicitly marked deprecated. This patch refactors
to use Operation::getAttrs().
Reviewed By: csigg
Differential Revision: https://reviews.llvm.org/D97546
This allows for referencing nearly every component of an operation from within a custom directive.
It also fixes a bug with the current type_ref implementation, PR48478
Differential Revision: https://reviews.llvm.org/D96189
We could extend this with an interface to allow dialect to perform a type
conversion, but that would make the folder creating operation which isn't
the case at the moment, and isn't necessarily always desirable.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D95991
This class used to serve a few useful purposes:
* Allowed containing a null DictionaryAttr
* Provided some simple mutable API around a DictionaryAttr
The first of which is no longer an issue now that there is much better caching support for attributes in general, and a cache in the context for empty dictionaries. The second results in more trouble than it's worth because it mutates the internal dictionary on every action, leading to a potentially large number of dictionary copies. NamedAttrList is a much better alternative for the second use case, and should be modified as needed to better fit it's usage as a DictionaryAttrBuilder.
Differential Revision: https://reviews.llvm.org/D93442
This better matches the rest of the infrastructure, is much simpler, and makes it easier to move these types to being declaratively specified.
Differential Revision: https://reviews.llvm.org/D93432
This exposes several issues with the current generation that this revision also fixes.
* TypeDef now allows specifying the base class to use when generating.
* TypeDef now inherits from DialectType, which allows for using it as a TypeConstraint
* Parser/Printers are now no longer generated in the header(removing duplicate symbols), and are now only generated when necessary.
- Now that generatedTypeParser/Printer are only generated in the definition file,
existing users will need to manually expose this functionality when necessary.
* ::get() is no longer generated for singleton types, because it isn't necessary.
Differential Revision: https://reviews.llvm.org/D93270
Some operations use integer literals as part of their custom format that don't necessarily map to an internal IntegerAttr. This revision exposes the same `parseInteger` functions as the DialectAsmParser to allow for these operations to parse integer literals without incurring the otherwise unnecessary roundtrip through IntegerAttr.
Differential Revision: https://reviews.llvm.org/D93152
OperationFolder currently uses ConstantOp as a backup when trying to materialize a constant after an operation is folded. This dependency isn't really useful or necessary given that dialects can/should provide a `materializeConstant` implementation.
Fixes PR#44866
Differential Revision: https://reviews.llvm.org/D92980
This allows for operations that exclusively affect symbol operations to better describe their side effects.
Differential Revision: https://reviews.llvm.org/D91581
The side effect infrastructure is based on the Effect and Resource class
templates, instances of instantiations of which are constructed as
thread-local singletons. With this scheme, it is impossible to further
parameterize either of those, or the EffectInstance class that contains
pointers to an Effect and Resource instances. Such a parameterization is
necessary to express more detailed side effects, e.g. those of a loop or
a function call with affine operations inside where it is possible to
precisely specify the slices of accessed buffers.
Include an additional Attribute to EffectInstance class for further
parameterization. This allows to leverage the dialect-specific
registration and uniquing capabilities of the attribute infrastructure
without requiring Effect or Resource instantiations to be attached to a
dialect themselves.
Split out the generic part of the side effect Tablegen classes into a
separate file to avoid generating built-in MemoryEffect interfaces when
processing any .td file that includes SideEffectInterfaceBase.td.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D91493
These includes have been deprecated in favor of BuiltinDialect.h, which contains the definitions of ModuleOp and FuncOp.
Differential Revision: https://reviews.llvm.org/D91572
TestDialect has many operations and they all live in ::mlir namespace.
Sometimes it is not clear whether the ops used in the code for the test passes
belong to Standard or to Test dialects.
Also, with this change it is easier to understand what test passes registered
in mlir-opt are actually passes in mlir/test.
Differential Revision: https://reviews.llvm.org/D90794
Previously they were separated into "instance" and "kind" aliases, and also required that the dialect know ahead of time all of the instances that would have a corresponding alias. This approach was very clunky and not ergonomic to interact with. The new approach is to provide the dialect with an instance of an attribute/type to provide an alias for, fully replacing the original split approach.
Differential Revision: https://reviews.llvm.org/D89354
Often times the legality of inlining can change depending on if the callable is going to be inlined in-place, or cloned. For example, some operations are not allowed to be duplicated and can only be inlined if the original callable will cease to exist afterwards. The new `wouldBeCloned` flag allows for dialects to hook into this when determining legality.
Differential Revision: https://reviews.llvm.org/D90360
In certain situations it isn't legal to inline a call operation, but this isn't something that is possible(at least not easily) to prevent with the current hooks. This revision adds a new hook so that dialects with call operations that shouldn't be inlined can prevent it.
Differential Revision: https://reviews.llvm.org/D90359
Added an underlying matcher for generic constant ops. This
included a rewriter of RewriterGen to make variable use more
clear.
Differential Revision: https://reviews.llvm.org/D89161
Adds a TypeDef class to OpBase and backing generation code. Allows one
to define the Type, its parameters, and printer/parser methods in ODS.
Can generate the Type C++ class, accessors, storage class, per-parameter
custom allocators (for the storage constructor), and documentation.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D86904
This tweaks the generated code for parsing attributes with a custom
directive to call `addAttribute` on the `OperationState` directly,
and adds a newline after this call. Previously, the generated code
would call `addAttribute` on the `OperationState` field `attributes`,
which has no such method and fails to compile. Furthermore, the lack
of newline would generate code with incorrectly formatted single line
`if` statements. Added tests for parsing and printing attributes with
a custom directive.
Reviewed By: mehdi_amini
Differential Revision: https://reviews.llvm.org/D87860
- Use TypeRange instead of ArrayRef<Type> where possible.
- Change some of the custom builders to also use TypeRange
Differential Revision: https://reviews.llvm.org/D87944
This revision allows representing a reduction at the level of linalg on tensors for named ops. When a structured op has a reduction and returns tensor(s), new conventions are added and documented.
As an illustration, the syntax for a `linalg.matmul` writing into a buffer is:
```
linalg.matmul ins(%a, %b : memref<?x?xf32>, tensor<?x?xf32>)
outs(%c : memref<?x?xf32>)
```
, whereas the syntax for a `linalg.matmul` returning a new tensor is:
```
%d = linalg.matmul ins(%a, %b : tensor<?x?xf32>, memref<?x?xf32>)
init(%c : memref<?x?xf32>)
-> tensor<?x?xf32>
```
Other parts of linalg will be extended accordingly to allow mixed buffer/tensor semantics in the presence of reductions.
This adds some initial support for regions and does not support formatting the specific arguments of a region. For now this can be achieved by using a custom directive that formats the arguments and then parses the region.
Differential Revision: https://reviews.llvm.org/D86760
This revision adds support for custom directives to the declarative assembly format. This allows for users to use C++ for printing and parsing subsections of an otherwise declaratively specified format. The custom directive is structured as follows:
```
custom-directive ::= `custom` `<` UserDirective `>` `(` Params `)`
```
`user-directive` is used as a suffix when this directive is used during printing and parsing. When parsing, `parseUserDirective` will be invoked. When printing, `printUserDirective` will be invoked. The first parameter to these methods must be a reference to either the OpAsmParser, or OpAsmPrinter. The type of rest of the parameters is dependent on the `Params` specified in the assembly format.
Differential Revision: https://reviews.llvm.org/D84719
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
registry.insert<mlir::standalone::StandaloneDialect>();
registry.insert<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
Differential Revision: https://reviews.llvm.org/D85622
This greatly simplifies a large portion of the underlying infrastructure, allows for lookups of singleton classes to be much more efficient and always thread-safe(no locking). As a result of this, the dialect symbol registry has been removed as it is no longer necessary.
For users broken by this change, an alert was sent out(https://llvm.discourse.group/t/removing-kinds-from-attributes-and-types) that helps prevent a majority of the breakage surface area. All that should be necessary, if the advice in that alert was followed, is removing the kind passed to the ::get methods.
Differential Revision: https://reviews.llvm.org/D86121
This changes the behavior of constructing MLIRContext to no longer load globally
registered dialects on construction. Instead Dialects are only loaded explicitly
on demand:
- the Parser is lazily loading Dialects in the context as it encounters them
during parsing. This is the only purpose for registering dialects and not load
them in the context.
- Passes are expected to declare the dialects they will create entity from
(Operations, Attributes, or Types), and the PassManager is loading Dialects into
the Context when starting a pipeline.
This changes simplifies the configuration of the registration: a compiler only
need to load the dialect for the IR it will emit, and the optimizer is
self-contained and load the required Dialects. For example in the Toy tutorial,
the compiler only needs to load the Toy dialect in the Context, all the others
(linalg, affine, std, LLVM, ...) are automatically loaded depending on the
optimization pipeline enabled.
To adjust to this change, stop using the existing dialect registration: the
global registry will be removed soon.
1) For passes, you need to override the method:
virtual void getDependentDialects(DialectRegistry ®istry) const {}
and registery on the provided registry any dialect that this pass can produce.
Passes defined in TableGen can provide this list in the dependentDialects list
field.
2) For dialects, on construction you can register dependent dialects using the
provided MLIRContext: `context.getOrLoadDialect<DialectName>()`
This is useful if a dialect may canonicalize or have interfaces involving
another dialect.
3) For loading IR, dialect that can be in the input file must be explicitly
registered with the context. `MlirOptMain()` is taking an explicit registry for
this purpose. See how the standalone-opt.cpp example is setup:
mlir::DialectRegistry registry;
mlir::registerDialect<mlir::standalone::StandaloneDialect>();
mlir::registerDialect<mlir::StandardOpsDialect>();
Only operations from these two dialects can be in the input file. To include all
of the dialects in MLIR Core, you can populate the registry this way:
mlir::registerAllDialects(registry);
4) For `mlir-translate` callback, as well as frontend, Dialects can be loaded in
the context before emitting the IR: context.getOrLoadDialect<ToyDialect>()
