This extends the existing fold:
```
for(i = Start; i < End; ++i)
Rem = (i nuw+- IncrLoopInvariant) u% RemAmtLoopInvariant;
```
->
```
Rem = (Start nuw+- IncrLoopInvariant) % RemAmtLoopInvariant;
for(i = Start; i < End; ++i, ++rem)
Rem = rem == RemAmtLoopInvariant ? 0 : Rem;
```
To work with a non-zero `IncrLoopInvariant`.
This is a common usage in cases such as:
```
for(i = 0; i < N; ++i)
if ((i + 1) % X) == 0)
do_something_occasionally_but_not_first_iter();
```
Alive2 w/ i4/unrolled 6x (needs to be ran locally due to timeout):
https://alive2.llvm.org/ce/z/6tgyN3
Exhaust proof over all uint8_t combinations in C++:
https://godbolt.org/z/WYa561388
Porting to TTI provides direct access to the instruction cost model,
which can enable instruction cost based sinking without introducing code
duplication.
It may be profitable to revert SCCP propagation of C++ static values,
if such constants are pointers, in order to avoid redundant pointer
computation, since the method returning the constant is non-removable.
This patch is part of a set of patches that add an `-fextend-lifetimes`
flag to clang, which extends the lifetimes of local variables and
parameters for improved debuggability. In addition to that flag, the
patch series adds a pragma to selectively disable `-fextend-lifetimes`,
and an `-fextend-this-ptr` flag which functions as `-fextend-lifetimes`
for this pointers only. All changes and tests in these patches were
written by Wolfgang Pieb (@wolfy1961), while Stephen Tozer (@SLTozer)
has handled review and merging. The extend lifetimes flag is intended to
eventually be set on by `-Og`, as discussed in the RFC
here:
https://discourse.llvm.org/t/rfc-redefine-og-o1-and-add-a-new-level-of-og/72850
This patch implements a new intrinsic instruction in LLVM,
`llvm.fake.use` in IR and `FAKE_USE` in MIR, that takes a single operand
and has no effect other than "using" its operand, to ensure that its
operand remains live until after the fake use. This patch does not emit
fake uses anywhere; the next patch in this sequence causes them to be
emitted from the clang frontend, such that for each variable (or this) a
fake.use operand is inserted at the end of that variable's scope, using
that variable's value. This patch covers everything post-frontend, which
is largely just the basic plumbing for a new intrinsic/instruction,
along with a few steps to preserve the fake uses through optimizations
(such as moving them ahead of a tail call or translating them through
SROA).
Co-authored-by: Stephen Tozer <stephen.tozer@sony.com>
Was missing remainder on `Start` value.
Also changed logic as as nikic suggested (getting loop from `PN`
instead of `Rem`). The prior impl increased the complexity of the code
and made debugging it more difficult.
Closes#104877
```
for(i = Start; i < End; ++i)
Rem = (i nuw+ IncrLoopInvariant) u% RemAmtLoopInvariant;
```
->
```
Rem = (Start nuw+ IncrLoopInvariant) % RemAmtLoopInvariant;
for(i = Start; i < End; ++i, ++rem)
Rem = rem == RemAmtLoopInvariant ? 0 : Rem;
```
In its current state, only if `IncrLoopInvariant` and `Start` both
being zero.
Alive2 seemed unable to prove this (see:
https://alive2.llvm.org/ce/z/ATGDp3 which is clearly wrong but still
checks out...) so wrote an exhaustive test here:
https://godbolt.org/z/WYa561388Closes#96625
This re-commits d1a4f0c9fb559eb4c2fb56112e56343bcd333edc after
a issue was fixed in f92bfca9fc217cad9026598ef6755e711c0be070
("[AArch64] All bits of an exact right shift are demanded (#97448)").
This is a helper to avoid writing `getModule()->getDataLayout()`. I
regularly try to use this method only to remember it doesn't exist...
`getModule()->getDataLayout()` is also a common (the most common?)
reason why code has to include the Module.h header.
Uses the new InsertPosition class (added in #94226) to simplify some of
the IRBuilder interface, and removes the need to pass a BasicBlock
alongside a BasicBlock::iterator, using the fact that we can now get the
parent basic block from the iterator even if it points to the sentinel.
This patch removes the BasicBlock argument from each constructor or call
to setInsertPoint.
This has no functional effect, but later on as we look to remove the
`Instruction *InsertBefore` argument from instruction-creation
(discussed
[here](https://discourse.llvm.org/t/psa-instruction-constructors-changing-to-iterator-only-insertion/77845)),
this will simplify the process by allowing us to deprecate the
InsertPosition constructor directly and catch all the cases where we use
instructions rather than iterators.
DenseMap iteration order is not guaranteed to be deterministic.
Without the change,
llvm/test/Transforms/CodeGenPrepare/X86/statepoint-relocate.ll would
fail when `combineHashValue` changes (#95970).
Fixes: dba7329ebb0dbe1fabb3faaedfd31da3b8bd611d
In a similar manner as in https://reviews.llvm.org/D133494
use `TBL` to place bytes in the *upper* part of `i32` elements
and then convert to float using fixed-point `scvtf`, i.e.
scvtf Vd.4s, Vn.4s, #24
…f weights" #95136
Reverts #95060, and relands #86609, with the unintended code generation
changes addressed.
This patch implements the changes to LLVM IR discussed in
https://discourse.llvm.org/t/rfc-update-branch-weights-metadata-to-allow-tracking-branch-weight-origins/75032
In this patch, we add an optional field to MD_prof meatdata nodes for
branch weights, which can be used to distinguish weights added from
llvm.expect* intrinsics from those added via other methods, e.g. from
profiles or inserted by the compiler.
One of the major motivations, is for use with MisExpect diagnostics,
which need to know if branch_weight metadata originates from an
llvm.expect intrinsic. Without that information, we end up checking
branch weights multiple times in the case if ThinLTO + SampleProfiling,
leading to some inaccuracy in how we report MisExpect related
diagnostics to users.
Since we change the format of MD_prof metadata in a fundamental way, we
need to update code handling branch weights in a number of places.
We also update the lang ref for branch weights to reflect the change.
This patch implements the changes to LLVM IR discussed in
https://discourse.llvm.org/t/rfc-update-branch-weights-metadata-to-allow-tracking-branch-weight-origins/75032
In this patch, we add an optional field to MD_prof metadata nodes for
branch weights, which can be used to distinguish weights added from
`llvm.expect*` intrinsics from those added via other methods, e.g.
from profiles or inserted by the compiler.
One of the major motivations, is for use with MisExpect diagnostics,
which need to know if branch_weight metadata originates from an
llvm.expect intrinsic. Without that information, we end up checking
branch weights multiple times in the case if ThinLTO + SampleProfiling,
leading to some inaccuracy in how we report MisExpect related
diagnostics to users.
Since we change the format of MD_prof metadata in a fundamental way, we
need to update code handling branch weights in a number of places.
We also update the lang ref for branch weights to reflect the change.
As demonstrated in the test change, when deciding to sink a trunc we
were losing its flags. This patch moves to cloning the original
instruction instead.
Depending on the TLSMode many thread-local accesses on x86 can be
expressed by adding a %fs: segment register to an addressing mode. Even
if there are mutliple users of a `llvm.threadlocal.address` intrinsic it
is generally not worth sharing the value in a register but instead fold
the %fs access into multiple addressing modes.
Hence this changes CodeGenPrepare to duplicate the
`llvm.threadlocal.address` intrinsic as necessary.
Introduces a new `TargetLowering::addressingModeSupportsTLS` callback
that allows targets to indicate whether TLS accesses can be part of an
addressing mode.
This is fixing a performance problem, as this folding of TLS-accesses
into multiple addressing modes happened naturally before the
introduction of the `llvm.threadlocal.address` intrinsic, but regressed
due to `SelectionDAG` keeping things in registers when accessed across
basic blocks, so CodeGenPrepare needs to duplicate to mitigate this. We
see a ~0.5% recovery in a codebase with heavy TLS usage (HHVM).
This fixes most of #87437
Prior to #85863, the required parameters of llvm::isKnownNonZero were
Value and DataLayout. After, they are Value, Depth, and SimplifyQuery,
where SimplifyQuery is implicitly constructible from DataLayout. The
change to move Depth before SimplifyQuery needed callers to be updated
unnecessarily, and as commented in #85863, we actually want Depth to be
after SimplifyQuery anyway so that it can be defaulted and the caller
does not need to specify it.
This is the major rename patch that prior patches have built towards.
The DPValue class is being renamed to DbgVariableRecord, which reflects
the updated terminology for the "final" implementation of the RemoveDI
feature. This is a pure string substitution + clang-format patch. The
only manual component of this patch was determining where to perform
these string substitutions: `DPValue` and `DPV` are almost exclusively
used for DbgRecords, *except* for:
- llvm/lib/target, where 'DP' is used to mean double-precision, and so
appears as part of .td files and in variable names. NB: There is a
single existing use of `DPValue` here that refers to debug info, which
I've manually updated.
- llvm/tools/gold, where 'LDPV' is used as a prefix for symbol
visibility enums.
Outside of these places, I've applied several basic string
substitutions, with the intent that they only affect DbgRecord-related
identifiers; I've checked them as I went through to verify this, with
reasonable confidence that there are no unintended changes that slipped
through the cracks. The substitutions applied are all case-sensitive,
and are applied in the order shown:
```
DPValue -> DbgVariableRecord
DPVal -> DbgVarRec
DPV -> DVR
```
Following the previous rename patches, it should be the case that there
are no instances of any of these strings that are meant to refer to the
general case of DbgRecords, or anything other than the DPValue class.
The idea behind this patch is therefore that pure string substitution is
correct in all cases as long as these assumptions hold.
These are the last remaining "trivial" changes to passes that use
Instruction pointers for insertion. All of this should be NFC, it's just
changing the spelling of how we identify a position.
In one or two locations, I'm also switching uses of getNextNode etc to
using std::next with iterators. This too should be NFC.
---------
Merged by: Stephen Tozer <stephen.tozer@sony.com>
This patch changes DPValue::filter to be a non-member method
filterDbgVars. There are two reasons for this: firstly, the name of
DPValue is about to change to DbgVariableRecord, which will result in
every `for` loop that uses DPValue::filter to require a line break. This
is a small thing, but it makes the rename patch more difficult to
review, and is just generally more awkward for what is a fairly common
loop. Secondly, the intent is to later break up the DPValue class into
subclasses, at which point it would be better to have a non-member
function that allows template arguments for the cases we want to filter
with greater specificity.
This patch continues the ongoing rename work, replacing DPValue with
DbgRecord in comments and the names of variables, both members and
fn-local. This is the most labour-intensive part of the rename, as it is
where the most decisions have to be made about whether a given comment
or variable is referring to DPValues (equivalent to debug variable
intrinsics) or DbgRecords (a catch-all for all debug intrinsics); these
decisions are not individually difficult, but comprise a fairly large
amount of text to review.
This patch still largely performs basic string substitutions followed by
clang-format; there are almost* no places where, for example, a comment
has been expanded or modified to reflect the semantic difference between
DPValues and DbgRecords. I don't believe such a change is generally
necessary in LLVM, but it may be useful in the docs, and so I'll be
submitting docs changes as a separate patch.
*In a few places, `dbg.values` was replaced with `debug intrinsics`.
As part of the effort to rename the DbgRecord classes, this patch
renames the widely-used functions that operate on DbgRecords but refer
to DbgValues or DPValues in their names to refer to DbgRecords instead;
all such functions are defined in one of `BasicBlock.h`,
`Instruction.h`, and `DebugProgramInstruction.h`.
This patch explicitly does not change the names of any comments or
variables, except for where they use the exact name of one of the
renamed functions. The reason for this is reviewability; this patch can
be trivially examined to determine that the only changes are direct
string substitutions and any results from clang-format responding to the
changed line lengths. Future patches will cover renaming variables and
comments, and then renaming the classes themselves.
It's becoming potentially unsafe to insert a PHI instruction using a plain
Instruction pointer. Switch all the remaining sites that create and insert
PHIs to use iterators instead. For example, the code in
ComplexDeinterleavingPass.cpp is definitely at-risk of mixing PHIs and
debug-info.
Patch 1 of 3 to add llvm.dbg.label support to the RemoveDIs project. The
patch stack adds a new base class
-> 1. Add DbgRecord base class for DPValue and the not-yet-added
DPLabel class.
2. Add the DPLabel class.
3. Enable dbg.label conversion and add support to passes.
Patches 1 and 2 are NFC.
In the near future we also will rename DPValue to DbgVariableRecord and
DPLabel to DbgLabelRecord, at which point we'll overhaul the function
names too. The name DPLabel keeps things consistent for now.
Hint further tail call optimization opportunities when the examined
returned value is the return value of a known intrinsic or library
function, and it appears as first function argument.
Fixes: https://github.com/llvm/llvm-project/issues/75455.
With this, I get a clean test suite running under RemoveDIs, the
non-intrinsic representation of debug-info, including under asan. We've
previously established that we generate identical binaries for some
large projects, so this i just edge-case cleanup. The changes:
* CodeGenPrepare fixups need to apply to dbg.assigns as well as
dbg.values (a dbg.assign is a dbg.value).
* Pin a test for constant-deletion to intrinsic debug-info: this very
rare scenario uses a different kill-location sigil in dbg.value mode to
RemoveDIs mode, which generates spurious test differences.
* Suppress a memory leak in a unit test: the code for dealing with
trailing debug-info in a block is necessarily fiddly, leading to this
leak when testing it. Developer-facing interfaces for moving
instructions around always deal with this behind the scenes.
* SROA, when replacing some vector-loads, needs to insert the
replacement loads ahead of any debug-info records so that their values
remain dominated by a definition. Set the head-bit indicating our
insertion should come before debug-info.
Replacing a free extension with 2 or more extensions unnecessarily
increases the number of IR instructions without providing any benefits.
It also unnecessarily causes operations to be performed on wider types
than necessary.
In some cases, the extra extensions also pessimize codegen (see
bfis-in-loop.ll).
The changes in arm64-codegen-prepare-extload.ll also show that we avoid
promotions that should only be performed in stress mode.
PR: https://github.com/llvm/llvm-project/pull/77094
