This seems to be a legacy relic from days gone by where the
remote test suite runner operated completely differently than it
does today. git blames and comments traced this functionality
back to about 2012, and nobody seems to know anything about it
now.
llvm-svn: 255060
This change introduce 3 different working mode for Platform::LoadImage
depending on the file specs specified.
* If only a remote file is specified then the remote file is loaded on
the target (same behavior as before)
* If only a local file is specified then the local file is installed to
the current working directory and then loaded from there.
* If both local and remote file is specified then the local file is
installed to the specified location and then loaded from there.
The same options are exposed on the SB API with a new method LoadImage
method while the old signature presers its meaning.
On the command line the installation of the shared library can be specified
with the "--install" option of "process load".
Differential revision: http://reviews.llvm.org/D15152
llvm-svn: 255014
This moves all the global variables into a separate module called
`configuration`. This has a number of advantages:
1. Configuration data is centrally maintained so it's easy to get
a high level overview of what configuration data the test suite
makes use of.
2. The method of sharing configuration data among different parts
of the test suite becomes standardized. Previously we would
put some things into the `lldb` module, some things into the
`lldbtest_config` module, and some things would not get shared.
Now everything is shared through one module and is available to
the entire test suite.
3. It opens the door to moving some of the initialization code into
the `configuration` module, simplifying the implementation of
`dotest.py`.
There are a few stragglers that didn't get converted over to using
the `configuration` module in this patch, because it would have grown
the size of the patch unnecessarily. This includes everything
currently in the `lldbtest_config` module, as well as the
`lldb.remote_platform` variable. We can address these in the future.
llvm-svn: 254982
This is a resubmit of r254403, see that commit's message for context. This fixes an issue in the
original commit, where we would incorrectly interrupt the process if the interrupt request came
just as we were about to send the stopped event to the public.
llvm-svn: 254902
Summary:
Because of the large number of XFAILs TestThreadStates has decayed quite a bit. This commit does
the following:
- removes the "breakpoint list" expectations. Most tests have been failing on this, because the
command output changed quite a while back. I remove it, because run_break_set_by_file_and_line
already does a decent amount of checking
- fixup test_state_after_expression: this was calling the wrong function by mistake. As now the
function actually tests something (which we know is broken), I needed to XFAIL it as well.
- replaces the sleep() with a proper wait-for-event functionality in parts which use async mode,
to stabilize the one function that actually tests something.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15233
llvm-svn: 254901
This test would fail before if conditional breakpoints weren't
working correctly, and the nature of the test (spinning up 10
threads, etc) opens the door to raciness.
This patch vastly simplifies the test, removes the need for relying
on conditional expression evaluation, and as a result makes the
correctness of the test vastly easier to reason about and reduces
flakiness.
Differential Revision: http://reviews.llvm.org/D15241
Reviewed By: Jim Ingham
llvm-svn: 254792
SUMMARY:
Marked TestCrashDuringStep.py as XFAIL for MIPS. The test generates IO error due to breakpoint at invalid address.
Reviewers: clayborg, labath
Subscribers: nitesh.jain, mohit.bhakkad, sagar, bhushan and lldb-commits
Differential Revision: http://reviews.llvm.org/D15182
llvm-svn: 254710
Previously we used sys.os.path for appending target pathes what failed
when cased dlopen to fail on the target because of the '\'.
The fix won't work for local Windows tests but dlopen don't available
on Windows anyway so the test don't make sense in that context.
llvm-svn: 254602
On android the symbols exposed by libdl (dlopen, dlclose, dlerror)
prefixed by "__dl_". This change moves the handling of process
load/unload to the platform object and override it for android to
handle the special prefix.
Differential revision: http://reviews.llvm.org/D11465
llvm-svn: 254504
Summary:
- Problem occurs when:
-- 32-bit inferiors run on x86_32 machine and
the architecture doesn't have AVX feature
-- This causes FPRType to be set to eFPRTypeFXSAVE
-- PTRACE_GETFPREGS was being used to read FXSAVE area
-- For 32-bit inferiors running on x86_32 machine,
PTRACE_GETFPREGS reads FSAVE area and not FXSAVE area
- Changed ptrace API to PTRACE_GETREGSET for 32-bit inferiors
-- This reads FPR data in FXSAVE format.
-- For 64-bit inferiors, no change has been made.
- Modified XFAIL for TestReturnValue.py
-- Earlier, this test was passing for Linux OS
-- Now, it passes for Android OS as well
Change-Id: Ieed72bc969b79516fc7b263b32493aa1e7a1a2ac
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: ovyalov, jingham, lldb-commits, tberghammer, labath
Subscribers: jevinskie, labath, tberghammer, danalbert
Differential Revision: http://reviews.llvm.org/D15042
llvm-svn: 254499
Summary:
The following situation was occuring in TestAttachResume:
- we did a "continue" from a breakpoint (which involves a private start-stop to step over the
breakpoint)
- after receiving the stop-reply from the step-over, we issue a "detach" (which requires a
process interrupt)
- at this moment, the public state is "running", private state is "about-to-be-stopped" (the
stopped event was broadcast, but it was not received yet)
- StopForDestroyOrDetach (public thread) notes the public state is running, sends an interrupt
request to the private thread
- private thread gets the eBroadcastBitInterrupt (before the eStateStopped message), and asks the
process plugin to stop (via Halt())
- process plugin says it has nothing to do as the process is already stopped
- private thread shrugs and carries on. receives the stop event, restores the breakpoint and
resumes the process.
- after a while, the public thread times out and says it failed to stop the process
This patch does the following:
- splits Halt() into two functions, private and public, their usage depends on the context
- public Halt(): sends eBroadcastBitInterrupt to the private thread and waits for the Stop
event
- HaltPrivate(): asks the plugin to stop and makes a note that the halt was requested. When the
next stop event comes it sets the interrupt flag on it.
- removes HijackPrivateProcessEvents(), as the only user (old Halt()) has gone away
- removes the m_currently_handling_event hack, as the new Halt() does not need it
- adds a use_run_lock parameter to public Halt() and WaitForProcessToStop(). This was needed
because RunThreadPlan uses Halt() while holding the run lock and we don't want Halt() to take
it away from him.
Reviewers: clayborg, jingham
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D14989
llvm-svn: 254403
These tests were fixed by r253026 but they was failing on the linux
build bot because of a system setup problem. Remove xfail from them
after we fixed the build bot.
llvm-svn: 254163
This passes on my FreeBSD stable/10 desktop and my new FreeBSD
11-current buildbot (which is not yet hooked up to the buildmaster).
llvm.org/pr18190
llvm-svn: 254000
This patch fixes two issues:
1) Popen needs to be used with universal_newlines=True by default.
This elicits automatic decoding from bytes -> string in Py3,
and has no negative effects in other Py versions.
2) The swig typemaps for converting between string and (char*, int)
did not work correctly when the length of the string was 0,
indicating an error. In this case we would try to construct a
string from uninitialized data.
3) Ironically, the bug mentioned in #2 led to a test passing on
Windows that was actually broken, because the test was written
such that the assertion was never even getting checked, so it
passed by default. So we additionally fix this test to also
fail if the method errors. By fixing this test it's now broken
on Windows, so we also xfail it.
llvm-svn: 253487
Patch by Nitesh Jain
Summary: The self.getArchitecture() returns the architecture based on the value of -A flag passed to dotest.py script.
There are many possible values for MIPS to this option (like mips32r2, mips32r6, mips64, mips64r2,.... ).
This patch uses re.match(mips,arch) to check if architecture string starts with mips.
Subscribers: lldb-commits, mohit.bhakkad, sagar, bhushan, jaydeep
Reviewers: clayborg, ovyalov
Differential: http://reviews.llvm.org/D14493
llvm-svn: 253444
breakpoint as "file address" so that the address breakpoint will track that
module even if it gets loaded in a different place. Also fixed the Address
breakpoint resolver so that it handles this tracking correctly.
llvm-svn: 253308
Summary:
- Reason of both bugs:
1. For the very first frame, Unwinder doesn't check the validity
of Full UnwindPlan before creating StackFrame from it:
When 'process launch' command is run after setting a breakpoint
in inferior, the Unwinder runs and saves only Frame 0 (the frame
in which breakpoint was set) in thread's StackFrameList i.e.
m_curr_frames_sp. However, it doesn't check the validity of the
Full UnwindPlan for this frame by unwinding 2 more frames further.
2. Unwinder doesn't update the CFA value of Cursor when Full UnwindPlan
fails and FallBack UnwindPlan succeeds in providing valid CFA values
for frames:
Sometimes during unwinding of stack frames, the Full UnwindPlan
inside the RegisterContextLLDB object may fail to provide valid
CFA values for these frames. Then the Fallback UnwindPlan is used
to unwind the frames.
If the Fallback UnwindPlan succeeds, then it provides a valid new
CFA value. The RegisterContextLLDB::m_cfa field of Cursor object
is updated during the Fallback UnwindPlan execution. However,
UnwindLLDB misses the implementation to update the 'cfa' field
of this Cursor with this valid new CFA value.
- This patch fixes both these issues.
- Remove XFAIL in test files corresponding to these 2 Bugs
Change-Id: I932ea407545ceee2d628f946ecc61a4806d4cc86
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, lldb-commits, jasonmolenda
Subscribers: lldb-commits, ovyalov, tberghammer
Differential Revision: http://reviews.llvm.org/D14226
llvm-svn: 253026
This test fails most of the time when run under heavy load. The dsym
variant doesn't seem to be failing.
Tracking XFAIL marker with:
https://llvm.org/bugs/show_bug.cgi?id=25485
llvm-svn: 252702
They get treated as special RLE encoding symbols and packets get
corrupted. Most other packet types already know about this apparently,
but QEnvironment missed these two.
Should fix PR25300.
llvm-svn: 252521
instance:
break set -l c++ -r Name
will only break on C++ symbols that match Name, not ObjC or plain C symbols. This also works
for "break set -n" and there are SB API's to pass this as well.
llvm-svn: 252356
This allows for command-line debugging of iOS simulator binaries (as long as UI is not required, or a full UI simulator has previously been otherwise launched), as well as execution of the LLDB test suite on the iOS simulator
This is known to compile on OSX 10.11 GM - feedback from people on other platforms and/or older versions of OSX as to the buildability of this code is greatly appreciated
llvm-svn: 252112
This module was originally intended to be imported by top-level
scripts to be able to find the LLDB packages and third party
libraries. Packages themselves shouldn't need to import it,
because by the time it gets into the package, the top-level
script should have already done this. Indeed, it was just
adding the same values to sys.path multiple times, so this
patch is essentially no functional change.
To make sure it doesn't get re-introduced, we also delete the
`use_lldb_suite` module from `lldbsuite/test`, although the
original copy still remains in `lldb/test`
llvm-svn: 251963
