Remove the test override of `target.prefer-dynamic-value`.
Previously, the lldb default was `no-dynamic-values`. In rG9aa7e8e9ffbe (in
2015), the default was changed to `no-run-target`, but at that time the tests
were changed to be run with `no-dynamic-value`. I don't know the reasons for
not changing the tests, perhaps to avoid determining which tests to change, and
what about them to change.
Because `no-run-target` is the lldb default, I think it makes sense to make it
the test default too. It puts the test config closer to what's used in
practice.
This change removes the `target.prefer-dynamic-value` override, and for those
tests that failed, they have been updated to explicitly use
`no-dynamic-values`. Future changes could update these tests to use dynamic
values too, or they can be left as is to exercise non-dynamic typing.
Differential Revision: https://reviews.llvm.org/D132382
This patch combines D129166 (to always pick the just-built libc++) and
D132257 (to allow customizing the libc++ for testing). The common goal
is to avoid picking up an unexpected libc++ for testing.
Differential revision: https://reviews.llvm.org/D132263
Make sure we use the libc++ from the build dir. Currently, by passing
-stdlib=libc++, we might pick up the system libc++. This change ensures
that if LLVM_LIBS_DIR is set, we try to use the libc++ from there.
Differential revision: https://reviews.llvm.org/D129166
Remove the DarwinLog and qStructuredDataPlugins support
from debugserver. The DarwinLog plugin was never debugged
fully and made reliable, and the underlying private APIs
it uses have migrated since 2016 so none of them exist
any longer.
Differential Revision: https://reviews.llvm.org/D106324
rdar://75073283
Test runs log some of their output to files inside the LLDB session dir. This
session dir is shared between all tests, so all the tests have to make sure they
choose a unique file name inside that directory. We currently choose by default
`<test-class-name>-<test-method-name>` as the log file name. However, that means
that if not every test class in the test suite has a unique class name, then we
end up with a race condition as two tests will try to write to the same log
file.
I already tried in D83767 changing the format to use the test file basename
instead (which we already require to be unique for some other functionality),
but it seems the code for getting the basename didn't work on Windows.
This patch instead just changes that dotest stores the log files in the build
directory for the current test. We know that directory is unique for this test,
so no need to generate some unique file name now. Also removes all the
environment vars and parameters related to the now unused session dir.
The new log paths now look like this for a failure in 'TestCppOperators`:
```
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_dwarf/Failure.log
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_dsym/Failure.log
./lldb-test-build.noindex/lang/cpp/operators/TestCppOperators.test_gmodules/Failure.log
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D92498
The logic behind --rerun-all-issues was removed when we switched to LIT
as the test driver. This patch just removes the dotest option and
corresponding entry in configuration.py.
This patch stores the --apple-sdk argument in the dotest configuration.
When it's set, use it instead of the triple to determine the current
platform.
Differential revision: https://reviews.llvm.org/D85537
Summary:
My understanding is that this was added to make dotest interact well
with the GreenDragon bots, back when dotest was the main test driver.
Now that everything goes through lit (which has its own xunit
formatter), it seems largely irrelevant.
There are more cleanups that can be done after removing this be done
here, but this should be enough to test the waters.
Reviewers: JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D83545
Skip tests or parts thereof that aren't expected to work when run from a
reproducer. Also improve the doc comments in configuration.py to prevent
mistakes in the future.
Because LLDB isn't the one spawning the subprocess, the PID is different
during replay. Exclude it form the substring check during replay.
Depends on D79646 to pass with reproducer replay.
[intel-pt] Improve the way the test determines whether to run
- Now I'm creating a default value for the new test parameter
- I fixed a small mistake in the skipping logic of the test
... I forgot to clear the cmake cache when testing my diff
Summary:
@labath raised a concern on the way I was skipping this test. I think that was
fair and I found a better way.
Now I'm skipping if the CMAKE flag LLDB_BUILD_INTEL_PT is false.
I added an enabled_plugins entry in the dotest configuration, which gets
set by lit or lldb-dotest. The only available plugin right now is
'intel-pt', but I imagine it will be useful in the future for other
kinds of plugins that get determined at configuration time. I didn't
want to add a new argument option --enable-intel-pt or something or the
sort, as it wouldn't be useful for other cases.
Reviewers: labath, clayborg
Subscribers: lldb-commits, labath
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D77452
Make it possible to capture reproducers from the API test suite. Given
the symmetry between capture and replay, this patch also adds the
necessary code for replay. For now this is a NO-OP until the
corresponding reproducer instrumentation changes land.
For more info please refer to the RFC on lldb-dev:
http://lists.llvm.org/pipermail/lldb-dev/2020-April/016100.html
Differential revision: https://reviews.llvm.org/D77588
Summary:
This was added in 2018 (r339929), when we were still using the
hand-rolled test runner.
It does not seem to be relevant anymore. In fact as far as I can tell,
it's a big no-op now as the exclusive_test_subdir variable is never set.
Reviewers: vsk, JDevlieghere
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D74551
Pass the correct library directory from CMake to dotest.py when linking
liblldb, instead of trying to reconstruct the path from executable path.
This fixes link failures on platforms having non-null
LLVM_LIBDIR_SUFFIX.
Differential Revision: https://reviews.llvm.org/D73767
The primary motivation for this is to add another dimension to the
Swift LLDB test matrix, but this seems generally useful.
Differential Revision: https://reviews.llvm.org/D72662
There already are decorators and "--excluded" option to mark test-cases/files
as expected to fail. However, when a new test file is added and it which relates
to a feature that a target doesn't support, this requires either adding decorators
to that file or modifying the file provided as "--excluded" option value.
The purpose of this patch is to avoid any modifications in such cases.
E.g. if a target doesn't support "watchpoints" and passes "--xfail-category watchpoint"
to dotest, a testing job will not fail after a new watchpoint-related test file is added.
Differential Revision: https://reviews.llvm.org/D71906
Before the test reorganization, everything was part of a single test
suite with a single module cache. Now that things are properly separated
this is no longer the case. Only the shell tests inherited the logic to
properly configure and wipe the module caches. This patch adds that
logic back for the API tests. While doing so, I noticed that we were
configuring a Clang module cache in CMake, but weren't actually using it
from dotest.py. I included a fix for that in this patch as well.
Differential revision: https://reviews.llvm.org/D68755
llvm-svn: 374386
Currently, lit tests don't set neither the module cache for building
inferiors nor the module cache used by lldb when running tests.
Furthermore, we have several places where we rely on the path to the
module cache being always the same, rather than passing the correct
value around. This makes it hard to specify a different module cache
path when debugging a a test.
This patch reworks how we determine and pass around the module cache
paths and fixes the omission on the lit side. It also adds a sanity
check to the lit and dotest suites.
Differential revision: https://reviews.llvm.org/D66966
llvm-svn: 370394
This patch removes the -q (quiet) flag and changing the default
behavior. Currently the flag serves two purposes that are somewhat
contradictory, as illustrated by the difference between the argument
name (quiet) and the configuration flag (parsable). On the one hand it
reduces output, but on the other hand it prints more output, like the
result of individual tests. My proposal is to guard the extra output
behind the verbose flag and always print the individual test results.
Differential revision: https://reviews.llvm.org/D66837
llvm-svn: 370226
The results port was used by dosep.py to deal with test results coming
form different processes. With dosep.py gone, I don't think we need this
any longer.
Differential revision: https://reviews.llvm.org/D66811
llvm-svn: 370090
Today I discovered the skipLongRunningTest decorator and to my surprise
all the tests were passing without the decorator. They don't seem to be
that expensive either, they take a few seconds but we have tests that
take much longer than that. As such I propose to remove the decorator
and enable them by default.
Differential revision: https://reviews.llvm.org/D66774
llvm-svn: 369995
On the matrix bot on GreenDragon [1] we want to run the test suite
against different DWARF versions. The idea here is not to replace
targeted tests for certain DWARF features, but rather to provide an easy
way to support this configuration.
[1] http://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake-matrix/
Differential revision: https://reviews.llvm.org/D66370
llvm-svn: 369272
Now that the Xcode project is removed, I want to focus on dotest as a
test framework, and remove its driver capabilities for which we already
rely on llvm's lit. Removing multiprocessing is the first step in that
direction.
Differential revision: https://reviews.llvm.org/D65311
llvm-svn: 367331
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
If the path was not specified (and it's None), lexists throws an exception rather than returning False. get_filecheck_path now checks whether filecheck is set before calling lexists
llvm-svn: 344410
This allows bots which haven't updated to pass in --filecheck to
dotest.py to run more tests. FileCheck-dependent tests will continue to
fail.
Differential Revision: https://reviews.llvm.org/D53175
llvm-svn: 344401
Add a "filecheck" method to the LLDB test base. This allows test authors
to pattern match command output using FileCheck, making it possible to
write stricter tests than what `self.expect` allows.
For context (motivation, examples of stricter checking, etc), see the
lldb-dev thread: "Using FileCheck in lldb inline tests".
Differential Revision: https://reviews.llvm.org/D50751
llvm-svn: 342508
The single-process test runner is invoked in a number of different
scenarios, including when multiple test dirs are specified or (afaict)
when lit is used to drive the test suite.
Unfortunately the --test-subdir option did not work with the single
process test runner, breaking an important use case (using lit to run
swift-lldb Linux tests):
Failure URL: https://ci.swift.org/job/swift-PR-Linux/6841
We won't be able to run lldb tests within swift PR testing without
filtering down the set of tests.
This change makes --test-subdir work with the single-process runner.
llvm-svn: 339929
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
Summary:
This used to be important when all tests were run in a single process,
but that has no longer been the case for a while. Furthermore, this hook fails
to build on new mac versions for several people, and it's not clear
whether fixing it is worth the effort.
Reviewers: jingham, clayborg, davide
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D41871
llvm-svn: 322167
I have put them all in their own category, and made that category disabled by default.
Differential revision: https://reviews.llvm.org/D31718
llvm-svn: 299587
Summary:
This has been broken at least since the new test result framework was
added, which was over a year ago. It looks like nobody has missed it
since.
Removing this makes the gmodules handling code saner, as it already did
not know how to handle the multiple-compilers case.
My motivation for this is libc++ data formatters support on android -- I
am trying make a central way of determining whether libc++ tests can be
run, and without this, I would have to resort to similar hacks as the
gmodules code.
Reviewers: jingham, zturner
Subscribers: danalbert, tfiala, lldb-commits
Differential Revision: https://reviews.llvm.org/D30779
llvm-svn: 297811
Summary:
This patch is necessary because individual test cases are not required
to have unique names. Therefore, test cases must now
be specified explicitly in the form <TestCase>.<TestMethod>.
Because it works by regex matching, passing just <TestCase> will
still disable an entire file.
This also allows for multiple exclusion files to be specified.
Reviewers: zturner, labath, jingham, tfiala
Subscribers: lldb-commits, sas
Differential Revision: https://reviews.llvm.org/D24988
llvm-svn: 283238
Summary:
The current implementation of the test suite allows the user to run
a certain subset of tests using '-p', but does not allow the inverse,
where a user wants to run all but some number of known failing tests.
Implement this functionality.
Reviewers: labath, zturner, tfiala
Subscribers: jingham, sas, lldb-commits
Differential Revision: https://reviews.llvm.org/D24629
llvm-svn: 282298
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Use of --rerun-all-issues will enable any test method failure, not just
test methods marked with the flakey decorator, to rerun.
Currently this does not change the flakey logic's immediate rerun
attempt. I want to make sure this doesn't cause any significant issues
before changing that part.
The rerun reporting is only known to work properly with the
default (new) BasicResultsFormatter reporting. Once we work out
any issues, I'll go back and make sure the curses output handles
it properly as well.
llvm-svn: 255543
