Implements https://isocpp.org/files/papers/P2662R3.pdf
The feature is exposed as an extension in older language modes.
Mangling is not yet supported and that is something we will have to do before release.
This is a follow up to https://github.com/llvm/llvm-project/pull/71417 ,
which aims to resolve concerns brought up there. Namely, this patch
replaces `CXXNewInitializationStyle::Implicit` with a dedicated
`HasInitializer` flag. This makes `CXXNewInitializationStyle` to model
syntax again. This patch also renames `Call` and `List` to less
confusing `Parens` and `Braces`.
Summary:
The standard GNU atomic operations are a very common way to target
hardware atomics on the device. With more heterogenous devices being
introduced, the concept of memory scopes has been in the LLVM language
for awhile via the `syncscope` modifier. For targets, such as the GPU,
this can change code generation depending on whether or not we only need
to be consistent with the memory ordering with the entire system, the
single GPU device, or lower.
Previously these scopes were only exported via the `opencl` and `hip`
variants of these functions. However, this made it difficult to use
outside of those languages and the semantics were different from the
standard GNU versions. This patch introduces a `__scoped_atomic` variant
for the common functions. There was some discussion over whether or not
these should be overloads of the existing ones, or simply new variants.
I leant towards new variants to be less disruptive.
The scope here can be one of the following
```
__MEMORY_SCOPE_SYSTEM // All devices and systems
__MEMORY_SCOPE_DEVICE // Just this device
__MEMORY_SCOPE_WRKGRP // A 'work-group' AKA CUDA block
__MEMORY_SCOPE_WVFRNT // A 'wavefront' AKA CUDA warp
__MEMORY_SCOPE_SINGLE // A single thread.
```
Naming consistency was attempted, but it is difficult to capture to full
spectrum with no many names. Suggestions appreciated.
This patch converts CXXNewExpr::InitializationStyle into a scoped enumat namespace scope. It also affirms the status quo by adding a new enumerator to represent implicit initializer.
This is a re-land of https://github.com/llvm/llvm-project/pull/71322 ace4489397d17abfb20d36de1404cfbe102401a7
This patch converts `CXXNewExpr::InitializationStyle` into a scoped enum at namespace scope. It also affirms the status quo by adding a new enumerator to represent implicit initializer.
This patch converts `ImplicitParamDecl::ImplicitParamKind` into a scoped enum at namespace scope, making it eligible for forward declaring. This is useful for `preferred_type` annotations on bit-fields.
structured-block
where clause is one of the following:
private(list)
reduction([reduction-modifier ,] reduction-identifier : list)
nowait
Differential Revision: https://reviews.llvm.org/D157933
_Generic accepts an expression operand whose type is matched against a
list of associations. The expression operand is unevaluated, but the
type matched is the type after lvalue conversion. This conversion loses
type information, which makes it more difficult to match against
qualified or incomplete types.
This extension allows _Generic to accept a type operand instead of an
expression operand. The type operand form does not undergo any
conversions and is matched directly against the association list.
This extension is also supported in C++ as we already supported
_Generic selection expressions there.
The RFC for this extension can be found at:
https://discourse.llvm.org/t/rfc-generic-selection-expression-with-a-type-operand/70388
Differential Revision: https://reviews.llvm.org/D149904
This makes the two interfaces for designators more similar so that it's
easier to merge them together in a future refactoring.
Differential Revision: https://reviews.llvm.org/D147580
Since we decided to remove the support for `-fcoroutines-ts` in
clang/llvm17 and the clang16/llvm16 is branched. So we're going to
remove the `-fcoroutines-ts` option.
The interfaces for designators (i.e. C99 designated initializers) was
done in two slightly different ways. This was rather wasteful as the
differences could be combined into one.
Reviewed By: rsmith
Differential Revision: https://reviews.llvm.org/D140584
This commit relands the patches for implementing P0960R3 and P1975R0,
which describe initializing aggregates via a parenthesized list.
The relanded commits are:
* 40c52159d3ee - P0960R3 and P1975R0: Allow initializing aggregates from
a parenthesized list of values
* c77a91bb7ba7 - Remove overly restrictive aggregate paren init logic
* 32d7aae04fdb - Fix a clang crash on invalid code in C++20 mode
This patch also fixes a crash in the original implementation.
Previously, if the input tried to call an implicitly deleted copy or
move constructor of a union, we would then try to initialize the union
by initializing it's first element with a reference to a union. This
behavior is incorrect (we should fail to initialize) and if the type of
the first element has a constructor with a single template typename
parameter, then Clang will explode. This patch fixes that issue by
checking that constructor overload resolution did not result in a
deleted function before attempting parenthesized aggregate
initialization.
Additionally, this patch also includes D140159, which contains some
minor fixes made in response to code review comments in the original
implementation that were made after that patch was submitted.
Co-authored-by: Sheng <ox59616e@gmail.com>
Fixes#54040, Fixes#59675
Reviewed By: ilya-biryukov
Differential Revision: https://reviews.llvm.org/D141546
This feature causes clang to crash when compiling Chrome - see
https://crbug.com/1405031 and
https://github.com/llvm/llvm-project/issues/59675
Revert "[clang] Fix a clang crash on invalid code in C++20 mode."
This reverts commit 32d7aae04fdb58e65a952f281ff2f2c3f396d98f.
Revert "[clang] Remove overly restrictive aggregate paren init logic"
This reverts commit c77a91bb7ba793ec3a6a5da3743ed55056291658.
Revert "[clang][C++20] P0960R3 and P1975R0: Allow initializing aggregates from a parenthesized list of values"
This reverts commit 40c52159d3ee337dbed14e4c73b5616ea354c337.
This patch implements P0960R3, which allows initialization of aggregates
via parentheses.
As an example:
```
struct S { int i, j; };
S s1(1, 1);
int arr1[2](1, 2);
```
This patch also implements P1975R0, which fixes the wording of P0960R3
for single-argument parenthesized lists so that statements like the
following are allowed:
```
S s2(1);
S s3 = static_cast<S>(1);
S s4 = (S)1;
int (&&arr2)[] = static_cast<int[]>(1);
int (&&arr3)[2] = static_cast<int[2]>(1);
```
This patch was originally authored by @0x59616e and completed by
@ayzhao.
Fixes#54040, Fixes#54041
Co-authored-by: Sheng <ox59616e@gmail.com>
Full write up : https://discourse.llvm.org/t/c-20-rfc-suggestion-desired-regarding-the-implementation-of-p0960r3/63744
Reviewed By: ilya-biryukov
Differential Revision: https://reviews.llvm.org/D129531
As with static bool for whatever reason printing them on their own
worked fine but wasn't handled when you printed the whole type.
I don't see a good way to test this from clang's side so our existing
tests will have to do.
We can now print all of the struct "A", so there's no need for a separate
one for static bool testing. I've not checked the output, just that it
succeeds. This saves us having to handle different min/max between systems.
Depends on D135169
Reviewed By: aeubanks, shafik
Differential Revision: https://reviews.llvm.org/D135170
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
This completes the implementation of P1091R3 and P1381R1.
This patch allow the capture of structured bindings
both for C++20+ and C++17, with extension/compat warning.
In addition, capturing an anonymous union member,
a bitfield, or a structured binding thereof now has a
better diagnostic.
We only support structured bindings - as opposed to other kinds
of structured statements/blocks. We still emit an error for those.
In addition, support for structured bindings capture is entirely disabled in
OpenMP mode as this needs more investigation - a specific diagnostic indicate the feature is not yet supported there.
Note that the rest of P1091R3 (static/thread_local structured bindings) was already implemented.
at the request of @shafik, i can confirm the correct behavior of lldb wit this change.
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/54300
Fixes https://github.com/llvm/llvm-project/issues/52720
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D122768
This is a recommit of b822efc7404bf09ccfdc1ab7657475026966c3b2,
reverted in dc34d8df4c48b3a8f474360970cae8a58e6c84f0. The commit caused
fails because the test ast-print-fp-pragmas.c did not specify particular
target, and it failed on targets which do not support constrained
intrinsics. The original commit message is below.
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
This patch gives basic parsing and semantic support for
"parallel masked taskloop simd" construct introduced in
OpenMP 5.1 (section 2.16.10)
Differential Revision: https://reviews.llvm.org/D128946
On some buildbots test `ast-print-fp-pragmas.c` fails, need to investigate it.
This reverts commit 0401fd12d4aa0553347fe34d666fb236d8719173.
This reverts commit b822efc7404bf09ccfdc1ab7657475026966c3b2.
AST does not have special nodes for pragmas. Instead a pragma modifies
some state variables of Sema, which in turn results in modified
attributes of AST nodes. This technique applies to floating point
operations as well. Every AST node that can depend on FP options keeps
current set of them.
This technique works well for options like exception behavior or fast
math options. They represent instructions to the compiler how to modify
code generation for the affected nodes. However treatment of FP control
modes has problems with this technique. Modifying FP control mode
(like rounding direction) usually requires operations on hardware, like
writing to control registers. It must be done prior to the first
operation that depends on the control mode. In particular, such
operations are required for implementation of `pragma STDC FENV_ROUND`,
compiler should set up necessary rounding direction at the beginning of
compound statement where the pragma occurs. As there is no representation
for pragmas in AST, the code generation becomes a complicated task in
this case.
To solve this issue FP options are kept inside CompoundStmt. Unlike to FP
options in expressions, these does not affect any operation on FP values,
but only inform the codegen about the FP options that act in the body of
the statement. As all pragmas that modify FP environment may occurs only
at the start of compound statement or at global level, such solution
works for all relevant pragmas. The options are kept as a difference
from the options in the enclosing compound statement or default options,
it helps codegen to set only changed control modes.
Differential Revision: https://reviews.llvm.org/D123952
This patch gives basic parsing and semantic support for
"parallel masked taskloop" construct introduced in
OpenMP 5.1 (section 2.16.9)
Differential Revision: https://reviews.llvm.org/D128834
This patch gives basic parsing and semantic support for
"masked taskloop simd" construct introduced in OpenMP 5.1 (section 2.16.8)
Differential Revision: https://reviews.llvm.org/D128693
This patch gives basic parsing and semantic support for "masked taskloop"
construct introduced in OpenMP 5.1 (section 2.16.7)
Differential Revision: https://reviews.llvm.org/D128478
Adds basic parsing/sema/serialization support for the
#pragma omp target parallel loop directive.
Differential Revision: https://reviews.llvm.org/D122359
WG14 adopted N2775 (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2775.pdf)
at our Feb 2022 meeting. This paper adds a literal suffix for
bit-precise types that automatically sizes the bit-precise type to be
the smallest possible legal _BitInt type that can represent the literal
value. The suffix chosen is wb (for a signed bit-precise type) which
can be combined with the u suffix (for an unsigned bit-precise type).
The preprocessor continues to operate as-if all integer types were
intmax_t/uintmax_t, including bit-precise integer types. It is a
constraint violation if the bit-precise literal is too large to fit
within that type in the context of the preprocessor (when still using
a pp-number preprocessing token), but it is not a constraint violation
in other circumstances. This allows you to make bit-precise integer
literals that are wider than what the preprocessor currently supports
in order to initialize variables, etc.
C++20 non-type template parameter prints `MyType<{{116, 104, 105, 115}}>` when the code is as simple as `MyType<"this">`. This patch prints `MyType<{"this"}>`, with one layer of braces preserved for the intermediate structural type to trigger CTAD.
`StringLiteral` handles this case, but `StringLiteral` inside `APValue` code looks like a circular dependency. The proposed patch implements a cheap strategy to emit string literals in diagnostic messages only when they are readable and fall back to integer sequences.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D115031
Given a dependent `T` (maybe an undeduced `auto`),
Before:
new T(z) --> new T((z)) # changes meaning with more args
new T{z} --> new T{z}
T(z) --> T(z)
T{z} --> T({z}) # forbidden if T is auto
After:
new T(z) --> new T(z)
new T{z} --> new T{z}
T(z) --> T(z)
T{z} --> T{z}
Depends on D113393
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D120608
Otherwise callers of these functions have to check both the return value
for and the contents of the returned llvm::Optional.
Fixes#53742
Differential Revision: https://reviews.llvm.org/D119525
Implement P2128R6 in C++23 mode.
Unlike GCC's implementation, this doesn't try to recover when a user
meant to use a comma expression.
Because the syntax changes meaning in C++23, the patch is *NOT*
implemented as an extension. Instead, declaring an array with not
exactly 1 parameter is an error in older languages modes. There is an
off-by-default extension warning in C++23 mode.
Unlike the standard, we supports default arguments;
Ie, we assume, based on conversations in WG21, that the proposed
resolution to CWG2507 will be accepted.
We allow arrays OpenMP sections and C++23 multidimensional array to
coexist:
[a , b] multi dimensional array
[a : b] open mp section
[a, b: c] // error
The rest of the patch is relatively straight forward: we take care to
support an arbitrary number of arguments everywhere.
Underscore-uglified identifiers are used in standard library implementations to
guard against collisions with macros, and they hurt readability considerably.
(Consider `push_back(Tp_ &&__value)` vs `push_back(Tp value)`.
When we're describing an interface, the exact names of parameters are not
critical so we can drop these prefixes.
This patch adds a new PrintingPolicy flag that can applies this stripping
when recursively printing pieces of AST.
We set it in code completion/signature help, and in clangd's hover display.
All three features also do a bit of manual poking at names, so fix up those too.
Fixes https://github.com/clangd/clangd/issues/736
Differential Revision: https://reviews.llvm.org/D116387
