Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
Summary:
Test was skipped because -data-evaluate-expression was thought
to not work on globals. This is not the case - the issue was clang
removes debug info for globals in cpp files that are not used.
Add a reference to the globals in question, and fix memory patter in
test to match memory pattern in testcase.
Reviewers: ki.stfu, abidh
Reviewed By: ki.stfu
Subscribers: aprantl, lldb-commits
Differential Revision: https://reviews.llvm.org/D37533
llvm-svn: 312726
Summary:
This fixes the case where a user tries to set a breakpoint on a source
line outside of any function (e.g. because that code is #ifdefed out, or
the compiler did not emit code for the function, etc.) and we would
silently move the breakpoint to the next function.
Now we check whether the line range of the resolved symbol context
function matches the original line number. We reject any breakpoint
locations that appear to move the breakpoint into a new function. This
filtering only happens if we have full debug info available (e.g. in
case of -gline-tables-only compilation, we still set the breakpoint on
the nearest source line).
Reviewers: jingham
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30817
llvm-svn: 297817
Currently on remote platforms the lldb-mi tests fail, which means they time out.
Given how many of the lldb-mi tests there are, this means a long wait.
llvm-svn: 296951
Summary:
Some of the mi commands implemented in lldb-mi are incomplete/not confirming to the spec.
- `gdb-show` and `gdb-set` doesn't support getting/setting `disassembly-flavor`
- `environment-cd` should also change the working directory for inferior
- debugger CLI output should be printed as console-stream-output record, rather than being dumped directly
to stdout
- `target-select` should provide inner error message in mi response
Related bug report:
- https://llvm.org/bugs/show_bug.cgi?id=28026
- https://llvm.org/bugs/show_bug.cgi?id=28718
- https://llvm.org/bugs/show_bug.cgi?id=30265
Reviewers: ki.stfu, abidh
Subscribers: abidh, ki.stfu, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D24711
llvm-svn: 291104
The line numbers come out slightly differently when the test is run with gcc-4.9
as a compiler. The test probably should not depend on that, but that is a
different story.
llvm-svn: 287893
Summary:
When extracting options for long options (starting with `--`), the use of
`MIUtilString::SplitConsiderQuotes` to split all the arguments was being
conditioned on the option type to be expected. This was wrong as this caused
other options to be parsed incorrectly since it was not taking into account the
presence of quotes.
Patch by Ed Munoz <edmunoz@microsoft.com>
Reviewers: edmunoz, ki.stfu
Subscribers: ki.stfu, lldb-commits
Projects: #lldb
Differential Revision: https://reviews.llvm.org/D24202
llvm-svn: 282135
Summary: This patch adds a new test and fixes extra new-line before exit
Reviewers: abidh
Subscribers: ki.stfu, dawn, lldb-commits, abidh
Differential Revision: https://reviews.llvm.org/D9740
llvm-svn: 281199
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
Summary:
When trying to parse the -break-insert arguments as a named location, the string parsing was not configured to allow directory paths. This patch adds a constructor to allow the parsing of string as directory path along with the other parameters.
This fixes https://llvm.org/bugs/show_bug.cgi?id=28709
Patch from malaperle@gmail.com
Reviewers: clayborg, ki.stfu
Subscribers: lldb-commits, ki.stfu
Differential Revision: https://reviews.llvm.org/D22902
llvm-svn: 277117
* Previously -break-enable mistakenly set BP's enabled flag to false.
* These commands print fake =breakpoint-modified messages, what's not
needed anymore because that events are come in normal way.
* Add tests for -break-enable/-break-disable commands
Initial patch from xuefangliang@hotmail.com. The test case was improved by me.
Differential Revision: http://reviews.llvm.org/D21757
llvm-svn: 275381
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
-thread-info in lldbmi does not conform to protocol. Should end with
current thread id as described here:
https://sourceware.org/gdb/onlinedocs/gdb/GDB_002fMI-Thread-Commands.html#GDB_002fMI-Thread-Commands
When printing all threads, the current thread id should be printed
afterwards.
Example:
-thread-info
^done,threads=[
{id="2",target-id="Thread 0xb7e14b90 (LWP 21257)",
frame={level="0",addr="0xffffe410",func="__kernel_vsyscall",
args=[]},state="running"},
{id="1",target-id="Thread 0xb7e156b0 (LWP 21254)",
frame={level="0",addr="0x0804891f",func="foo",
args=[{name="i",value="10"}],
file="/tmp/a.c",fullname="/tmp/a.c",line="158"},
state="running"}],
current-thread-id="1"
(gdb)
Patch from jacdavis@microsoft.com
Reviewers: zturner, chuckr
Differential Revision: http://reviews.llvm.org/differential/revision/edit/18880/
llvm-svn: 265858
We want to do a better job presenting errors that occur when evaluating
expressions. Key to this effort is getting away from a model where all
errors are spat out onto a stream where the client has to take or leave
all of them.
To this end, this patch adds a new class, DiagnosticManager, which
contains errors produced by the compiler or by LLDB as an expression
is created. The DiagnosticManager can dump itself to a log as well as
to a string. Clients will (in the future) be able to filter out the
errors they're interested in by ID or present subsets of these errors
to the user.
This patch is not intended to change the *users* of errors - only to
thread DiagnosticManagers to all the places where streams are used. I
also attempt to standardize our use of errors a bit, removing trailing
newlines and making clients omit 'error:', 'warning:' etc. and instead
pass the Severity flag.
The patch is testsuite-neutral, with modifications to one part of the
MI tests because it relied on "error: error:" being erroneously
printed. This patch fixes the MI variable handling and the testcase.
<rdar://problem/22864976>
llvm-svn: 263859
This removes the following decorators:
* skipIfI386
* expectedFailureI386
* expectedFailurex86_64
* skipIfArch
* skipUnlessArch
* skipUnlessI386
And other related decorators. All code using those decorators
is updated to use expectedFailureAll and skipIf
llvm-svn: 260178
expectedFailureWindows is equivalent to using the general
expectedFailureAll decorator with oslist="windows". Additionally,
by moving towards these common decorators we can solve the issue
of having to support decorators that can be called with or without
arguments. Once all decorators are always called with arguments,
and this is enforced by design (because you can't specify the condition
you're decorating for without passing an argument) the implementation
of the decorators can become much simpler
Differential Revision: http://reviews.llvm.org/D16936
llvm-svn: 260134
This patch adds support the command 'source info' as follows:
(lldb) help source info
Display source line information (as specified) based on the current executable's
debug info.
Syntax: source info <cmd-options>
Command Options Usage:
source info [-c <count>] [-s <shlib-name>] [-f <filename>] [-l <linenum>] [-e <linenum>]
source info [-c <count>] [-s <shlib-name>] [-n <symbol>]
source info [-c <count>] [-a <address-expression>]
-a <address-expression> ( --address <address-expression> )
Lookup the address and display the source information for the corresponding
file and line.
-c <count> ( --count <count> )
The number of line entries to display.
-e <linenum> ( --end-line <linenum> )
The line number at which to stop displaying lines.
-f <filename> ( --file <filename> )
The file from which to display source.
-l <linenum> ( --line <linenum> )
The line number at which to start the displaying lines.
-n <symbol> ( --name <symbol> )
The name of a function whose source to display.
-s <shlib-name> ( --shlib <shlib-name> )
Look up the source in the given module or shared library (can be specified
more than once).
For example:
(lldb) source info --file x.h
Lines for file x.h in compilation unit x.cpp in `x
[0x0000000100000d00-0x0000000100000d10): /Users/dawn/tmp/./x.h:10
[0x0000000100000d10-0x0000000100000d1b): /Users/dawn/tmp/./x.h:10
The new options are used to fix the MI command:
-symbol-list-lines <file>
which didn't work for header files because it called:
target modules dump line-table <file>
which only dumps line tables for a compilation unit.
The patch also fixes a bug in the error reporting when no files were supplied to the command. Previously you'd get:
(lldb) target modules dump line-table
error:
Syntax:
error: no source filenames matched any command arguments
Now you get:
error: file option must be specified.
Reviewed by: clayborg, jingham, ki.stfu
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D15593
llvm-svn: 256863
Allow both '-var-list-children var0' and '-var-list-children "var0"' to be used with the -var-list-children command. GDB MI allows for this and it is necessary if the variable name contains spaces, such as var5.std::_Vector_base<std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::allocator<std::basic_string<char, std::char_traits<char>, std::allocator<cahr> > > >.
Differential Revision: http://reviews.llvm.org/D15168
llvm-svn: 254941
Summary:
- Reason of both bugs:
1. For the very first frame, Unwinder doesn't check the validity
of Full UnwindPlan before creating StackFrame from it:
When 'process launch' command is run after setting a breakpoint
in inferior, the Unwinder runs and saves only Frame 0 (the frame
in which breakpoint was set) in thread's StackFrameList i.e.
m_curr_frames_sp. However, it doesn't check the validity of the
Full UnwindPlan for this frame by unwinding 2 more frames further.
2. Unwinder doesn't update the CFA value of Cursor when Full UnwindPlan
fails and FallBack UnwindPlan succeeds in providing valid CFA values
for frames:
Sometimes during unwinding of stack frames, the Full UnwindPlan
inside the RegisterContextLLDB object may fail to provide valid
CFA values for these frames. Then the Fallback UnwindPlan is used
to unwind the frames.
If the Fallback UnwindPlan succeeds, then it provides a valid new
CFA value. The RegisterContextLLDB::m_cfa field of Cursor object
is updated during the Fallback UnwindPlan execution. However,
UnwindLLDB misses the implementation to update the 'cfa' field
of this Cursor with this valid new CFA value.
- This patch fixes both these issues.
- Remove XFAIL in test files corresponding to these 2 Bugs
Change-Id: I932ea407545ceee2d628f946ecc61a4806d4cc86
Signed-off-by: Abhishek Aggarwal <abhishek.a.aggarwal@intel.com>
Reviewers: jingham, lldb-commits, jasonmolenda
Subscribers: lldb-commits, ovyalov, tberghammer
Differential Revision: http://reviews.llvm.org/D14226
llvm-svn: 253026
