Since the ipv6 patch, we've experienced occasional flakyness in
lldb-server tests. This was due to the fact that lldb-server was trying
to listen on both v4 and v6 localhost sockets (and consider it a success
if at least one of them succeeded), while the test framework was only
trying to connect to the v4 one.
This change makes sure lldb-server only listens on the v4 socket.
llvm-svn: 316391
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The step count depends on code generated by compiler (GCC/Clang).
It will also vary for different MIPS arch variant. Hence skipping these test for MIPS.
Subscribers: jaydeep, bhushan, lldb-commits, slthakur
llvm-svn: 305383
Summary:
'arch' is a valid qHostInfo key, but the unit
test for qHostInfo did not include it in the set of possible keys.
Reviewers: tfiala, labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D32711
llvm-svn: 302260
Summary:
These classes existed only because of the GetName() static function,
which can be moved to a more natural place anyway. I move the linux
version to NativeProcessLinux (and get rid of ProcFileReader), the
freebsd version to ProcessFreeBSD (and fix a bug where it was using the
current process ID, instead of the inferior pid), and remove the NetBSD
version (which was probably incorrect anyway, as it assumes the current
process instead of the inferior.
I also add an llgs test to that verifies thread names are read
correctly.
Reviewers: zturner, krytarowski, emaste
Subscribers: lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D30981
llvm-svn: 298058
this test was using the VPATH hack to avoid having a copy of the
inferior source code. This makes the test fail if in happens to run
concurrently with a test in the parent folder. Fix that by moving it up
to the parent.
llvm-svn: 296741
Summary:
Native Thread ID is retrieved with _lwp_self() on NetBSD.
The returned value is of type int32_t, but for consistency with other Operating Systems cast it to uint64_t.
Sponsored by <The NetBSD Foundation>
Reviewers: joerg, labath, clayborg, emaste
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30374
llvm-svn: 296360
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
The server was no longer sending the thread PCs the way the client
expected them.
I changed the server to send them back as a threadstop info field,
similar to the Apple version of the server.
I also changed the client to look for them there, before querying the
server.
I added a test to ensure the server doesn't stop sending them.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D28880
Author: Jason Majors
llvm-svn: 292611
It turns out that self.dbg.GetSelectedPlatform().GetTriple() is not a good way
to get the triple of the process, as it returns the incorrect triple in case of a
32-bit process running on a 64-bit platform.
Instead, go the long way round and ask the stub for the process triple. This
fixes the test for i386.
llvm-svn: 280922
Summary:
This adds the jModulesInfo packet, which is the equivalent of qModulesInfo, but it enables us to
query multiple modules at once. This makes a significant speed improvement in case the
application has many (over a hundred) modules, and the communication link has a non-negligible
latency. This functionality is accessed by ProcessGdbRemote::PrefetchModuleSpecs(), which does
the caching. GetModuleSpecs() is modified to first consult the cache before asking the remote
stub. PrefetchModuleSpecs is currently only called from POSIX-DYLD dynamic loader plugin, after
it reads the list of modules from the inferior memory, but other uses are possible.
This decreases the attach time to an android application by about 40%.
Reviewers: clayborg
Subscribers: tberghammer, lldb-commits, danalbert
Differential Revision: https://reviews.llvm.org/D24236
llvm-svn: 280919
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
As Pavel pointed out in a comment on llvm.org/pr30271, the VPATH I was
using here to eliminate duplication of a .cpp file had a side effect of
attempting to pull in a .o/.obj file from that same parent dir, where
other tests can be running in parallel. This is no good.
For now, I have removed the VPATH, which should address
llvm.org/pr30271. I have also removed the XFAIL.
llvm-svn: 280675
This code represents the Week of Code work I did on bringing up
lldb-server LLGS support for Darwin. It does not include the
Xcode project changes needed, as we don't want to throw that switch
until more support is implemented (i.e. this change is inert, no
build systems use it yet. I've verified on Ubuntu 16.04, macOS
Xcode and macOS cmake builds).
This change does some minimal refactoring of code that is shared
with the Linux LLGS portion, moving it from NativeProcessLinux into
NativeProcessProtocol. That code is also used by NativeProcessDarwin.
Current state on Darwin:
* Process launching is implemented. (Attach is not).
Launching on devices has not yet been tested (FBS/BKS might
need a bit of work).
* Inferior waitpid monitoring and communication of exit status
via MainLoop callback is implemented.
* Memory read/write, breakpoints, thread register context, etc.
are not yet implemented. This impacts process stop/resume, as
the initial launch suspended immediately starts the process
up and running because it doesn't know it is supposed to remain
stopped.
* I implemented the equivalent of MachThreadList as
NativeThreadListDarwin, in anticipation that we might want to
factor out common parts into NativeThreadList{Protocol} and share
some code here. After writing it, though, the fallout from merging
Mach Task/Process into a single concept plus some other minor
changes makes the whole NativeThreadListDarwin concept nothing more
than dead weight. I am likely going to get rid of this class and
just manage it directly in NativeProcessDarwin, much like I did
for NativeProcessLinux.
* There is a stub-out call for starting a STDIO thread. That will
go away and adopt the MainLoop pselect-based IOObject reading.
I am developing the fully-integrated changes in the following repo,
which contains the necessary Xcode bits and the glue that enables
lldb-debugserver on a macOS system:
https://github.com/tfiala/lldb/tree/llgs-darwin
This change also breaks out a few of the lldb-server tests into
their own directory, and adds some $qHostInfo tests (not sure why
I didn't write those tests back when I initially implemented that
on the Linux side).
llvm-svn: 280604
Part of TestGDBRemoteMemoryRead has been disabled since r259379 because it was incompatible with
python3. This changes the test to use the lldb-server test framework, which is a more appropriate
method of testing raw stub behaviour anyway (and should avoid the whole python 3 issue).
llvm-svn: 279039
"Incorrect" file name seen on Android whene the main executable is
called "app_process32" (or 64) but the linker specifies the package
name (e.g. com.android.calculator2). Additionally it can be present
in case of some linker bugs.
This CL adds logic to try to fetch the correct file name from the proc
file system based on the base address sepcified by the linker in case
we are failed to load the module by name.
Differential revision: http://reviews.llvm.org/D22219
llvm-svn: 276411
Summary:
This is a slightly reworked version of D16322, which I had reverted because it did not do what it
advertised. Differences from the previous version are:
- moved the code for cleaning up the remote working dir to a later point as it was removing the
log file before we could get to it.
- specialised log downloading code for gdb-remote tests is not needed, as this will cover that
use case as well.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D21898
llvm-svn: 274491
Summary:
"gcc" is equivalent to "ehframe" in ProcessGDBRemote, but
only "ehframe" was a valid response in the test suite.
Reviewers: tfiala, jasonmolenda, clayborg
Subscribers: lldb-commits, sas
Differential Revision: http://reviews.llvm.org/D18807
llvm-svn: 267459
Summary:
On some android targets, a binary can produce additional garbage (e.g. warning messages from the
dynamic linker) on the standard error, which confuses some tests. This relaxes the stderr
expectations for targets known for their chattyness.
Reviewers: tfiala, ovyalov
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D19114
llvm-svn: 266326
A number of test cases were failing on big-endian systems simply due to
byte order assumptions in the tests themselves, and no underlying bug
in LLDB.
These two test cases:
tools/lldb-server/lldbgdbserverutils.py
python_api/process/TestProcessAPI.py
actually check for big-endian target byte order, but contain Python errors
in the corresponding code paths.
These test cases:
functionalities/data-formatter/data-formatter-python-synth/TestDataFormatterPythonSynth.py
functionalities/data-formatter/data-formatter-smart-array/TestDataFormatterSmartArray.py
functionalities/data-formatter/synthcapping/TestSyntheticCapping.py
lang/cpp/frame-var-anon-unions/TestFrameVariableAnonymousUnions.py
python_api/sbdata/TestSBData.py (first change)
could be fixed to check for big-endian target byte order and update the
expected result strings accordingly. For the two synthetic tests, I've
also updated the source to make sure the fake_a value is always nonzero
on both big- and little-endian platforms.
These test case:
python_api/sbdata/TestSBData.py (second change)
functionalities/memory/cache/TestMemoryCache.py
simply accessed memory with the wrong size, which wasn't noticed on LE
but fails on BE.
Differential Revision: http://reviews.llvm.org/D18985
llvm-svn: 266315
This patch adds support for Linux on SystemZ:
- A new ArchSpec value of eCore_s390x_generic
- A new directory Plugins/ABI/SysV-s390x providing an ABI implementation
- Register context support
- Native Linux support including watchpoint support
- ELF core file support
- Misc. support throughout the code base (e.g. breakpoint opcodes)
- Test case updates to support the platform
This should provide complete support for debugging the SystemZ platform.
Not yet supported are optional features like transaction support (zEC12)
or SIMD vector support (z13).
There is no instruction emulation, since our ABI requires that all code
provide correct DWARF CFI at all PC locations in .eh_frame to support
unwinding (i.e. -fasynchronous-unwind-tables is on by default).
The implementation follows existing platforms in a mostly straightforward
manner. A couple of things that are different:
- We do not use PTRACE_PEEKUSER / PTRACE_POKEUSER to access single registers,
since some registers (access register) reside at offsets in the user area
that are multiples of 4, but the PTRACE_PEEKUSER interface only allows
accessing aligned 8-byte blocks in the user area. Instead, we use a s390
specific ptrace interface PTRACE_PEEKUSR_AREA / PTRACE_POKEUSR_AREA that
allows accessing a whole block of the user area in one go, so in effect
allowing to treat parts of the user area as register sets.
- SystemZ hardware does not provide any means to implement read watchpoints,
only write watchpoints. In fact, we can only support a *single* write
watchpoint (but this can span a range of arbitrary size). In LLDB this
means we support only a single watchpoint. I've set all test cases that
require read watchpoints (or multiple watchpoints) to expected failure
on the platform. [ Note that there were two test cases that install
a read/write watchpoint even though they nowhere rely on the "read"
property. I've changed those to simply use plain write watchpoints. ]
Differential Revision: http://reviews.llvm.org/D18978
llvm-svn: 266308
Previously we had 3 different method to run shell commands on the
target and 4 copy of code waiting until a given file appears on the
target device (used for syncronization). This CL merges these methods
to 1 run_platform_command and 1 wait_for_file_on_target functions
located in some utility classes.
Differential revision: http://reviews.llvm.org/D18789
llvm-svn: 265398
Summary:
Debug info is used only by the client and lldb-server tests do not even have the client component
running, as they communicate with the server directly. Therefore, running the tests for each
debug info type is unnecessarry.
This adds general ability to mark a test class as not dependent on debug info, and marks all
lldb-server tests as such.
Reviewers: tberghammer, tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18598
llvm-svn: 265017
Summary:
Some tests (Hc_then_Csignal_signals_correct_thread, at least) were sending a "continue" packet in
one expect_gdbremote_sequence invocation, and "expecting" the stop-reply in another call. This
posed a problem, because the were packets were not persisted between the two invocations, and if
the stub was exceptionally fast to respond, the packet would be received in the first invocation
(where it would be ignored) and then the second invocation would fail because it could not find
the packet.
Since doing matching in two invocations seems like a reasonable use of the packet pump, instead
of fixing the test, I make sure the packet_pump supports this usage by making the list of
captured packets persistent.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D18140
llvm-svn: 263629
Summary:
Normally, when the remote stub is not ready, we will get ECONNREFUSED during the connect()
attempt. However, due to the way how ADB forwarding works, on android targets the connect() will
always be successful, but the connection will be immediately dropped if ADB could not connect on
the remote side. This commit tries to detect this situation, and report it as "connection
refused" so that the upper test layers attempt the connection again.
Reviewers: tfiala, tberghammer
Subscribers: tberghammer, danalbert, srhines, lldb-commits
Differential Revision: http://reviews.llvm.org/D18146
llvm-svn: 263439
The problem with the original patch (and my first attempt to fix) was that the value debug
monitor flags could persist from one test to another. Resetting the value in the setUp() function
fixes the problem.
llvm-svn: 262713
Summary:
this enables download of remote log files for llgs and debugserver tests (previously we were just
passing the host file name which obviously did not work). Note this also changes the debugserver
logging to work only when logging has been requested on the command line, whereas previously it
would log unconditionally. I can change it back if anyone is relying on this, but I thought I'd
make this consistent.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D17798
llvm-svn: 262597
