In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
llvm-svn: 298322
This is a safeguard against data loss if the user specifies a directory
that is not a cache directory. Teach the existing cache pruning clients
to create files with appropriate names.
Differential Revision: https://reviews.llvm.org/D31109
llvm-svn: 298271
I'm not sure if zeroing VAL before writing pVal is really necessary, but at least one other place did it in code.
But by taking the store out of line, this reduces the opt binary by about 20k on my local x86-64 build.
llvm-svn: 298233
Go back to behavior pre-r231309 and reduce the timeout from 8 to ~1.5
min now that we have (a) PCMCache mechanism (r298165) and (b) timeout
that doesn't cause a failure, but actually build the module (r298175).
rdar://problem/30297862
llvm-svn: 298176
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
llvm-svn: 298004
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
llvm-svn: 297945
The idea is that the policy string fully specifies the policy and is portable
between clients.
Differential Revision: https://reviews.llvm.org/D31020
llvm-svn: 297927
Change the function that implements the pruning into a free function that
takes the policy as a struct argument.
Differential Revision: https://reviews.llvm.org/D31009
llvm-svn: 297907
Previously we did not have support for writing detailed
module information for each module, as well as the symbol
records. This patch adds support for this, and in doing
so enables the ability to construct minimal PDBs from
just a few lines of YAML. A test is added to illustrate
this functionality.
llvm-svn: 297900
Previously, if you attempted to write a key/value pair and the
value was equal to the key's default value, we would not output
the value. Sometimes it is useful to be able to see this value
in the output anyway.
llvm-svn: 297864
Summary:
Previously, ParseCommandLineOptions returns false and ignores error messages
when IgnoreErrors. It would be useful to also return error messages if users
decide to check parsing result instead of having the program exit on error.
Reviewers: chandlerc, mehdi_amini, rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30893
llvm-svn: 297810
Previously, it created a temporary directory and then failed when
FileOutputBuffer tried to rename that file to the destination file
(which is actually a directory name).
Differential Revision: https://reviews.llvm.org/D30912
llvm-svn: 297679
If raw_fd_ostream is constructed with the path of "-", it claims
ownership of the stdout file descriptor. This means that it closes
stdout when it is destroyed. If there are multiple users of
raw_fd_ostream wrapped around stdout, then a crash can occur because
of operations on a closed stream.
An example of this would be running something like "clang -S -o - -MD
-MF - test.cpp". Alternatively, using outs() (which creates a local
version of raw_fd_stream to stdout) anywhere combined with such a
stream usage would cause the crash.
The fix duplicates the stdout file descriptor when used within
raw_fd_ostream, so that only that particular descriptor is closed when
the stream is destroyed.
Patch by James Henderson!
llvm-svn: 297624
In openFileForRead, we would not previously return an error
if real_path resolution failed. After a recent patch, we
started propagating this error up. This caused a failure
in clang when trying to call openFileForRead("nul"). This
patch restores the previous behavior of not propagating this
error up.
llvm-svn: 297488
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
llvm-svn: 297483
We currently have to insert bits via a temporary variable of the same size as the target with various shift/mask stages, resulting in further temporary variables, all of which require the allocation of memory for large APInts (MaskSizeInBits > 64).
This is another of the compile time issues identified in PR32037 (see also D30265).
This patch adds the APInt::insertBits() helper method which avoids the temporary memory allocation and masks/inserts the raw bits directly into the target.
Differential Revision: https://reviews.llvm.org/D30780
llvm-svn: 297458
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
llvm-svn: 297314
This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Move the __try/__except block outside of the set_thread_name function to avoid a conflict with object unwinding due to the use of the llvm::Storage.
Differential Revision: https://reviews.llvm.org/D30707
llvm-svn: 297192
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
This extends an earlier change that did similar for add and sub operations.
With this first patch we lose the fastpath for the single word case as operator&= and friends don't support it. This can be added there if we think that's important.
I had to change some functions in the APInt class since the operator overloads were moved out of the class and can't be used inside the class now. The getBitsSet change collides with another outstanding patch to implement it with setBits. But I didn't want to make this patch dependent on that series.
I've also removed the Or, And, Xor functions which were rarely or never used. I already commited two changes to remove the only uses of Or that existed.
Differential Revision: https://reviews.llvm.org/D30612
llvm-svn: 297121
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
Summary:
There are quite a few places in the code base that do something like the following to set the high or low bits in an APInt.
KnownZero |= APInt::getHighBitsSet(BitWidth, BitWidth - 1);
For BitWidths larger than 64 this creates a short lived APInt with malloced storage. I think it might even call malloc twice. Its better to just provide methods that can set the necessary bits without the temporary APInt.
I'll update usages that benefit in a separate patch.
Reviewers: majnemer, MatzeB, davide, RKSimon, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30525
llvm-svn: 297111
Do not include <sys/user.h> on NetBSD. It's dead file and will be removed.
No need to include <sys/sysctl.h> in this code context on NetBSD.
llvm-svn: 296973
pthread_self() returns a pthread_t, but we were setting it to
an int. It seems the cast to int when calling sysctl is still
the correct thing to do, though.
llvm-svn: 296892
Doing so defines the type llvm::thread. On FreeBSD, we need
to call a macro which references its own ::thread type, which
causes an ambiguity due to ADL when inside of the llvm namespace.
Since we don't even need this unless LLVM_ENABLE_THREADS == 1,
we don't even need this type anyway, as it is always equal to
std::thread, so we can just use that directly.
llvm-svn: 296891
Applications often need the current thread id when making
system calls, and some operating systems provide the notion
of a thread name, which can be useful in enabling better
diagnostics when debugging or logging.
This patch adds an accessor for the thread id, and "best effort"
getters and setters for the thread name. Since this is
non critical functionality, no error is returned to indicate
that a platform doesn't support thread names.
Differential Revision: https://reviews.llvm.org/D30526
llvm-svn: 296887
