Changes to the underlying logging infrastructure in Fall 2016 Darwin
OSes were no longer showing up NSLog messages in command-line LLDB.
This change restores that functionality, and adds test cases to
verify the new behavior.
rdar://26732492
llvm-svn: 275472
Android API <= 16 header do not have these symbols defined, but the kernel does support the
relevant calls. And in general, since these calls are on a best-effort basis, it won't hurt even
if we try to run in on a really ancient kernel.
llvm-svn: 275393
* Previously -break-enable mistakenly set BP's enabled flag to false.
* These commands print fake =breakpoint-modified messages, what's not
needed anymore because that events are come in normal way.
* Add tests for -break-enable/-break-disable commands
Initial patch from xuefangliang@hotmail.com. The test case was improved by me.
Differential Revision: http://reviews.llvm.org/D21757
llvm-svn: 275381
Summary:
LLDBTestResult.hardMarkAsSkipped marked the whole class as skipped when the first class in the
test failed the category check. This meant that subsequent tests in the same class did not run
even if they were passing the category filter. Fix that.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D22213
llvm-svn: 275173
We had some clients that had added old source paths remappings to their .lldbinit files and they were causing trouble at a later date. This fix should help mitigate these issues.
<rdar://problem/26358860>
llvm-svn: 274948
Summary:
The issue arises due to the wrong unwinder used for the first
stack frame, where the default unwinder returns erroneous frame
whereas the fallback would have given the correct frame had it
been used.
The following fix consists of two parts ->
1) The first part changes the unwinding strategy, earlier the
default unwinder was used to get 2 more stack frames and if it
failed a fallback unwinder was used. Now we try to obtain as many
frames (max 10) as we can get from default unwinder and also
fallback unwinder and use the one that gives more number of frames.
2) Normally unwindplans are assosciated with functions and the
row to be used is obtained from the offset (obtained from the low_pc
of the function symbol). Sometimes it may occur that the unwindplan
is assosciated to the complete Elf section in which case the offset
calculation would be wrong as the debugger uses the same offset originally
obtained from the function symbol. Hence this offset is recalculated.
Reviewers: tberghammer, lldb-commits, labath, jasonmolenda
Subscribers: jingham
Differential Revision: http://reviews.llvm.org/D21221
llvm-svn: 274750
Summary:
This patch fills in the implementation of GetMemoryRegions() on the Linux and Mac OS core file implementations of lldb_private::Process (ProcessElfCore::GetMemoryRegions and ProcessMachCore::GetMemoryRegions.) The GetMemoryRegions API was added under: http://reviews.llvm.org/D20565
The patch re-uses the m_core_range_infos list that was recently added to implement GetMemoryRegionInfo in both ProcessElfCore and ProcessMachCore to ensure the returned regions match the regions returned by Process::GetMemoryRegionInfo(addr_t load_addr, MemoryRegionInfo ®ion_info).
Reviewers: clayborg
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D21751
llvm-svn: 274741
Summary:
One of the tests there does not work with gcc, so I'm spinning that off into a separate test, so
that we can XFAIL it with more granularity.
I am also renaming the test to reflect the fact that it no longer tests only integer arguments.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D21923
llvm-svn: 274505
Summary:
This is a slightly reworked version of D16322, which I had reverted because it did not do what it
advertised. Differences from the previous version are:
- moved the code for cleaning up the remote working dir to a later point as it was removing the
log file before we could get to it.
- specialised log downloading code for gdb-remote tests is not needed, as this will cover that
use case as well.
Reviewers: tfiala
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D21898
llvm-svn: 274491
@unittest2.expectedFailure("rdar://7796742")
Which was covering up the fact this was failing on linux and hexagon. I added back a decorator so we don't break any build bots.
llvm-svn: 274388
We had support that assumed that thread local data for a variable could be determined solely from the module in which the variable exists. While this work for linux, it doesn't work for Apple OSs. The DWARF for thread local variables consists of location opcodes that do something like:
DW_OP_const8u (x)
DW_OP_form_tls_address
or
DW_OP_const8u (x)
DW_OP_GNU_push_tls_address
The "x" is allowed to be anything that is needed to determine the location of the variable. For Linux "x" is the offset within the TLS data for a given executable (ModuleSP in LLDB). For Apple OS variants, it is the file address of the data structure that contains a pthread key that can be used with pthread_getspecific() and the offset needed.
This fix passes the "x" along to the thread:
virtual lldb::addr_t
lldb_private::Thread::GetThreadLocalData(const lldb::ModuleSP module, lldb::addr_t tls_file_addr);
Then this is passed along to the DynamicLoader::GetThreadLocalData():
virtual lldb::addr_t
lldb_private::DynamicLoader::GetThreadLocalData(const lldb::ModuleSP module, const lldb::ThreadSP thread, lldb::addr_t tls_file_addr);
This allows each DynamicLoader plug-in do the right thing for the current OS.
The DynamicLoaderMacOSXDYLD was modified to be able to grab the pthread key from the data structure that is in memory and call "void *pthread_getspecific(pthread_key_t key)" to get the value of the thread local storage and it caches it per thread since it never changes.
I had to update the test case to access the thread local data before trying to print it as on Apple OS variants, thread locals are not available unless they have been accessed at least one by the current thread.
I also added a new lldb::ValueType named "eValueTypeVariableThreadLocal" so that we can ask SBValue objects for their ValueType and be able to tell when we have a thread local variable.
<rdar://problem/23308080>
llvm-svn: 274366
Summary:
As this test will create a new target, it will cause all following tests
to fail when running in platform mode, if the new target does not match
the existing architecture (for example, x86 vs x86_64).
Reviewers: zturner, spyffe, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D21906
llvm-svn: 274364
I overlooked the possibility of certain targets translating increment statement into a read and write.
In this case we replace increment statement with an assignment.
llvm-svn: 274215
Target::Install() was assuming the module at index 0 was the executable.
This is often true, but not guaranteed to be the case. The
TestInferiorChanged.py test highlighted this when run against iOS.
After the binary is replaced in the middle of the test, it becomes the
last module in the list. The rest of the Target::Install() logic then
clobbers the executable file by using whatever happens to be the first
module in the target module list.
This change also marks the TestInferiorChanged.py test as a no-debug-info
test.
llvm-svn: 273960
We were checking for integer types only before this. So I added the ability for CompilerType objects to check for integer and enum types.
Then I searched for places that were using the CompilerType::IsIntegerType(...) function. Many of these places also wanted to be checking for enumeration types as well, so I have fixed those places. These are in the ABI plug-ins where we are figuring out which arguments would go in where in regisers/stack when making a function call, or determining where the return value would live. The real fix for this is to use clang to compiler a CGFunctionInfo and then modify the code to be able to take the IR and a calling convention and have the backend answer the questions correctly for us so we don't need to create a really bad copy of the ABI in each plug-in, but that is beyond the scope of this bug fix.
Also added a test case to ensure this doesn't regress in the future.
llvm-svn: 273750
This patch allows LLDB for AArch64 to watch all bytes, words or double words individually on non 8-byte alligned addresses.
This patch also adds tests to verify this functionality.
Differential revision: http://reviews.llvm.org/D21280
llvm-svn: 272916
Prior to this we would display the typename for "TestObj<-1>" as "TestObj<4294967295>" when we showed the type. Expression parsing could also fail because we would fail to find the mangled name when evaluating expressions.
The issue was we were losing the signed'ness of the template integer parameter in DWARFASTParserClang.cpp.
<rdar://problem/25577041>
llvm-svn: 272434
This enables a couple of tests which have been shown to run reliably on the
linux x86 buildbot. If you see a failure after this commit, feel free to add
the xfail back, but please make it as specific as possible (i.e., try to make
it not cover i386/x86_64 with clang-3.5, clang-3.9 or gcc-4.9).
llvm-svn: 272326
If a lldbinline test's source file changed language, then the Makefile wasn't
updated. This was a problem if the Makefile was checked into the repository.
Now lldbinline.py always regenerates the Makefile and asserts if the
newly-generated version is not the same as the one already there. This ensures
that the repository will never be out of date without a buildbot failing.
http://reviews.llvm.org/D21032
llvm-svn: 272024
Some compilers do not mark up C++ functions as extern "C" in the DWARF, so LLDB
has to fall back (if it is about to give up finding a symbol) to using the base
name of the function.
This fix also ensures that we search by full name rather than "auto," which
could cause unrelated C++ names to be found. Finally, it adds a test case.
<rdar://problem/25094302>
llvm-svn: 271551
For Thread Sanitizer reports, LLDB tries to find a global variable declaration
corresponding to the racy address in order to provide a filename and line
number. This commit changes the lookup of the variable to use the mangled
name for lookup and fall back to the demangled version if unavailable. This
is needed to report locations of races on Swift global variables.
I've also added a test to make sure we look up C++ globals correctly.
rdar://problem/26459401
Differential Revision: http://reviews.llvm.org/D20760
llvm-svn: 271433
This change adds the capability of building test inferiors
with the -gmodules flag to enable module debug info support.
Windows is excluded per @zturner.
Reviewers: granata.enrico, aprantl, zturner, labath
Subscribers: zturner, labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D19998
llvm-svn: 270848
Summary:
using stdio in tests does not work on windows, and it is not completely reliable on linux.
Avoid using stdio in this test, as it is not necessary for this purpose.
Reviewers: clayborg
Subscribers: lldb-commits, zturner
Differential Revision: http://reviews.llvm.org/D20567
llvm-svn: 270831
T x;
U y;
doing
x = *((T*)y)
is undefined behavior, even if sizeof(T) == sizeof(U), due to pointer aliasing rules
Fix up a couple of places in LLDB that were doing this, and transform them into a defined and safe memcpy() operation
Also, add a test case to ensure we didn't regress by doing this w.r.t. tagged pointer NSDate instances
llvm-svn: 270793
TestBSDArchives.py and TestWatchLocation.py fail due to unicode error and bug has already been reported for arm and macOSx.
TestConstVariables.py fails because lldb cant figure out frame variable type when used in expr.
llvm-svn: 270780
TestCallUserAnonTypedef.py and TestIRInterpreter.py fail to limitation of JIT expressions in handling hard float ABI targets.
TestBSDArchives.py fails due to python unicode error.
TestBuiltinTrap.py fails due to wrong line information generated by some gcc versions.
llvm-svn: 270745
