I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z |
parallel --xargs -0 cat | aspell list --mode=none --ignore-case |
grep -E '^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n |
grep -vE '.{25}' | aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential Revision: https://reviews.llvm.org/D130827
Without the "found declaration" it is later not possible to know where the operator declaration
was brought into the scope calling it.
The initial motivation for this fix came from #55095. However, this also has an influence on
`clang -ast-dump` which now prints a `UsingShadow` attribute for operators only visible through
`using` statements. Also, clangd now correctly references the `using` statement instead of the
operator directly.
Reviewed By: shafik
Differential Revision: https://reviews.llvm.org/D129973
The original implementation uses `ND->getFormalLinkage() <=
Linkage::InternalLinkage`. It is not right since the spec only says
internal linkage and it doesn't mention 'no linkage'. This matters when
we consider constructors. According to [class.ctor.general]p1,
constructors have no name so constructors have no linkage too.
Currently, the semantics of linkage in clang is slightly
different from the semantics in C++ spec. In C++ spec, only names
have linkage. So that all entities of the same should share
one linkage. But in clang, different entities of the same could
have different linkage.
It would break a use case where the template have external linkage and
its specialization have internal linkage due to its type argument is
internal linkage. The root cause is that the semantics of internal
linkage in clang is a mixed form of internal linkage and TU-local in
C++ spec. It is hard to solve the root problem and I tried to add a
workaround inplace.
This includes the revised provisions of [basic.lookup.argdep] p4
1. ADL is amended to handle p 4.3 where functions in trasitively imported modules may
become visible when they are exported in the same namespace as a visible type.
2. If a function is in a different modular TU, and has internal-linkage, we invalidate
its entry in an overload set.
[basic.lookup.argdep] p5 ex 2 now passes.
Differential Revision: https://reviews.llvm.org/D129174
This reverts commit befa8cf087dbb8159a4d9dc8fa4d6748d6d5049a.
Apparently this breaks some libc++ builds with an apparent assertion,
so I'm looking into that .
This reverts commit d4d47e574ecae562ab32f8ac7fa3f4d424bb6574.
This fixes the lldb crash that was observed by ensuring that our
friend-'template contains reference to' TreeTransform properly handles a
TemplateDecl.
This reverts commit 2f207439521d62d9551b2884158368e8b34084e5 because it
triggers an assertion when building an LLDB test program:
Assertion failed: (InstantiatingSpecializations.empty() && "failed to
clean up an InstantiatingTemplate?"), function ~Sema, file
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/clang/lib/Sema/Sema.cpp,
line 458.
More details in https://reviews.llvm.org/D126907.
When overload resolution fails, clang emits a note diagnostic for each
candidate. For OpenCL builtins this often leads to many repeated note
diagnostics with no new information. Stop emitting such notes.
Update a test that was relying on counting those notes to check how
many builtins are available for certain extension configurations.
Differential Revision: https://reviews.llvm.org/D127961
This patch is the last prerequisite to switch the default behaviour to -fno-lax-vector-conversions in the future.
The first path ;D124093; fixed the altivec implicit castings.
Reviewed By: amyk
Differential Revision: https://reviews.llvm.org/D126540
This reverts commit a425cac31e2e4cee8e14b7b9a99c8ba17c1ebb52.
There is another libc++ test, that this time causes us to hit an
assertion. Reverting, likely for a while this time.
This includes a fix for the libc++ issue I ran across with friend
declarations not properly being identified as overloads.
This reverts commit 45c07db31cc76802a1a2e41bed1ce9c1b8198181.
When doing overload resolution, we have to check that candidates' parameter types are equal before trying to find a better candidate through checking which candidate is more constrained.
This revision adds this missing check and makes us diagnose those cases as ambiguous calls when the types are not equal.
Fixes GitHub issue https://github.com/llvm/llvm-project/issues/53640
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D123182
This is extended to all `std::` functions that take a reference to a
value and return a reference (or pointer) to that same value: `move`,
`forward`, `move_if_noexcept`, `as_const`, `addressof`, and the
libstdc++-specific function `__addressof`.
We still require these functions to be declared before they can be used,
but don't instantiate their definitions unless their addresses are
taken. Instead, code generation, constant evaluation, and static
analysis are given direct knowledge of their effect.
This change aims to reduce various costs associated with these functions
-- per-instantiation memory costs, compile time and memory costs due to
creating out-of-line copies and inlining them, code size at -O0, and so
on -- so that they are not substantially more expensive than a cast.
Most of these improvements are very small, but I measured a 3% decrease
in -O0 object file size for a simple C++ source file using the standard
library after this change.
We now automatically infer the `const` and `nothrow` attributes on these
now-builtin functions, in particular meaning that we get a warning for
an unused call to one of these functions.
In C++20 onwards, we disallow taking the addresses of these functions,
per the C++20 "addressable function" rule. In earlier language modes, a
compatibility warning is produced but the address can still be taken.
The same infrastructure is extended to the existing MSVC builtin
`__GetExceptionInfo`, which is now only recognized in namespace `std`
like it always should have been.
This is a re-commit of
fc3090109643af8d2da9822d0f99c84742b9c877,
a571f82a50416b767fd3cce0fb5027bb5dfec58c,
64c045e25b8471bbb572bd29159c294a82a86a2, and
de6ddaeef3aaa8a9ae3663c12cdb57d9afc0f906,
and reverts aa643f455a5362de7189eac630050d2c8aefe8f2.
This change also includes a workaround for users using libc++ 3.1 and
earlier (!!), as apparently happens on AIX, where std::move sometimes
returns by value.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123345
Revert "Fixup D123950 to address revert of D123345"
This reverts commit aa643f455a5362de7189eac630050d2c8aefe8f2.
When doing overload resolution, we have to check that candidates' parameter types are equal before trying to find a better candidate through checking which candidate is more constrained.
This revision adds this missing check and makes us diagnose those cases as ambiguous calls when the types are not equal.
Fixes GitHub issue https://github.com/llvm/llvm-project/issues/53640
Reviewed By: erichkeane
Differential Revision: https://reviews.llvm.org/D123182
This is extended to all `std::` functions that take a reference to a
value and return a reference (or pointer) to that same value: `move`,
`forward`, `move_if_noexcept`, `as_const`, `addressof`, and the
libstdc++-specific function `__addressof`.
We still require these functions to be declared before they can be used,
but don't instantiate their definitions unless their addresses are
taken. Instead, code generation, constant evaluation, and static
analysis are given direct knowledge of their effect.
This change aims to reduce various costs associated with these functions
-- per-instantiation memory costs, compile time and memory costs due to
creating out-of-line copies and inlining them, code size at -O0, and so
on -- so that they are not substantially more expensive than a cast.
Most of these improvements are very small, but I measured a 3% decrease
in -O0 object file size for a simple C++ source file using the standard
library after this change.
We now automatically infer the `const` and `nothrow` attributes on these
now-builtin functions, in particular meaning that we get a warning for
an unused call to one of these functions.
In C++20 onwards, we disallow taking the addresses of these functions,
per the C++20 "addressable function" rule. In earlier language modes, a
compatibility warning is produced but the address can still be taken.
The same infrastructure is extended to the existing MSVC builtin
`__GetExceptionInfo`, which is now only recognized in namespace `std`
like it always should have been.
This is a re-commit of
fc3090109643af8d2da9822d0f99c84742b9c877,
a571f82a50416b767fd3cce0fb5027bb5dfec58c, and
64c045e25b8471bbb572bd29159c294a82a86a25
which were reverted in
e75d8b70370435b0ad10388afba0df45fcf9bfcc
due to a crasher bug where CodeGen would emit a builtin glvalue as an
rvalue if it constant-folds.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123345
Revert "Extend support for std::move etc to also cover std::as_const and"
Revert "Update test to handle opaque pointers flag flip."
It crashes on libcxx tests https://lab.llvm.org/buildbot/#/builders/85/builds/8174
This reverts commit fc3090109643af8d2da9822d0f99c84742b9c877.
This reverts commit a571f82a50416b767fd3cce0fb5027bb5dfec58c.
This reverts commit 64c045e25b8471bbb572bd29159c294a82a86a25.
We still require these functions to be declared before they can be used,
but don't instantiate their definitions unless their addresses are
taken. Instead, code generation, constant evaluation, and static
analysis are given direct knowledge of their effect.
This change aims to reduce various costs associated with these functions
-- per-instantiation memory costs, compile time and memory costs due to
creating out-of-line copies and inlining them, code size at -O0, and so
on -- so that they are not substantially more expensive than a cast.
Most of these improvements are very small, but I measured a 3% decrease
in -O0 object file size for a simple C++ source file using the standard
library after this change.
We now automatically infer the `const` and `nothrow` attributes on these
now-builtin functions, in particular meaning that we get a warning for
an unused call to one of these functions.
In C++20 onwards, we disallow taking the addresses of these functions,
per the C++20 "addressable function" rule. In earlier language modes, a
compatibility warning is produced but the address can still be taken.
The same infrastructure is extended to the existing MSVC builtin
`__GetExceptionInfo`, which is now only recognized in namespace `std`
like it always should have been.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D123345
CUDA/HIP determines whether a function can be called based on
the device/host attributes of callee and caller. Clang assumes the
caller is CurContext. This is correct in most cases, however, it is
not correct in OpenMP parallel region when CUDA/HIP program
is compiled with -fopenmp. This causes incorrect overloading
resolution and missed diagnostics.
To get the correct caller, clang needs to chase the parent chain
of DeclContext starting from CurContext until a function decl
or a lambda decl is reached. Sema API is adapted to achieve that
and used to determine the caller in hostness check.
Reviewed by: Artem Belevich, Richard Smith
Differential Revision: https://reviews.llvm.org/D121765
function candidates
See: https://github.com/llvm/llvm-project/issues/54379
I tried to see if I can reuse ResolveAddressOfOverloadedFunction for
explicit function instantiation and so I managed to hit this ICE.
Bug was the diagnostic required an argument (%0) and specific code path
didn't pass an argument.
Differential Revision: https://reviews.llvm.org/D121646
As far as I can tell, MSVC allows the relevant conversions for all
pointer types. Found compiling a Windows SDK header.
I've verified that the updated errors in MicrosoftExtensions.cpp match
the ones that MSVC actually emits, except for the one with a FIXME. (Not
sure why this wasn't done for the patch that added the tests.)
To make up for the missing error, add a warning that triggers on
conversions that drop the __unaligned qualfier.
Differential Revision: https://reviews.llvm.org/D120936
Implement P2128R6 in C++23 mode.
Unlike GCC's implementation, this doesn't try to recover when a user
meant to use a comma expression.
Because the syntax changes meaning in C++23, the patch is *NOT*
implemented as an extension. Instead, declaring an array with not
exactly 1 parameter is an error in older languages modes. There is an
off-by-default extension warning in C++23 mode.
Unlike the standard, we supports default arguments;
Ie, we assume, based on conversations in WG21, that the proposed
resolution to CWG2507 will be accepted.
We allow arrays OpenMP sections and C++23 multidimensional array to
coexist:
[a , b] multi dimensional array
[a : b] open mp section
[a, b: c] // error
The rest of the patch is relatively straight forward: we take care to
support an arbitrary number of arguments everywhere.
Bug #52905 was originally papered over in a different way, but
I believe this is the actually proper fix, or at least closer to
it. We need to detect placeholder types as close to the front-end
as possible, and cause them to fail constraints, rather than letting
them persist into later stages.
Fixes#52905.
Fixes#52909.
Fixes#53075.
Differential Revision: https://reviews.llvm.org/D118552
The root cause for the crash is the incorrect use of `cast`.
The actual type and cast-to type is different. This patch fixes the
crash by converting the `cast` to `dyn_cast`.
This covers both C-style variadic functions and template variadic w/
parameter packs.
Previously we would return no signatures when working with template
variadic functions once activeParameter reached the position of the
parameter pack (except when it was the only param, then we'd still
show it when no arguments were given). With this commit, we now show
signathure help correctly.
Additionally, this commit fixes the activeParameter value in LSP output
of clangd in the presence of variadic functions (both kinds). LSP does
not allow the activeParamter to be higher than the number of parameters
in the active signature. With "..." or parameter pack being just one
argument, for all but first argument passed to "..." we'd report
incorrect activeParameter value. Clients such as VSCode would then treat
it as 0, as suggested in the spec) and highlight the wrong parameter.
In the future, we should add support for per-signature activeParamter
value, which exists in LSP since 3.16.0. This is not part of this
commit.
Differential Revision: https://reviews.llvm.org/D111318
As reported on https://pvs-studio.com/en/blog/posts/cpp/0771/ (Snippet 2) - (and mentioned on rGdc4259d5a38409) we are repeating the T1.isNull() check instead of checking T2.isNull() as well, and at this point neither should be null - so we're better off with an assertion.
Differential Revision: https://reviews.llvm.org/D107347
It seems that Clang 11 regressed functionality that was working in
Clang 10 regarding calling a few overloaded operators in an immediate
context. Specifically, we were not checking for immediate invocations
of array subscripting and the arrow operators, but we properly handle
the other overloaded operators.
This fixes the two problematic operators and adds some test coverage to
show they're equivalent to calling the operator directly.
This addresses PR50779.
This is the second part of p0388, dealing with overloads of list
initialization to incomplete array types. It extends the handling
added in D103088 to permit incomplete arrays. We have to record that
the conversion involved an incomplete array, and so (re-add) a bit flag
into the standard conversion sequence object. Comparing such
conversion sequences requires knowing (a) the number of array elements
initialized and (b) whether the initialization is of an incomplete array.
This also updates the web page to indicate p0388 is implemented (there
is no feature macro).
Differential Revision: https://reviews.llvm.org/D103908
This implements the new implicit conversion sequence to an incomplete
(unbounded) array type. It is mostly Richard Smith's work, updated to
trunk, testcases added and a few bugs fixed found in such testing.
It is not a complete implementation of p0388.
Differential Revision: https://reviews.llvm.org/D102645
Extends handling of list initialization of bounded array parameters.
This adds the missing checks on converting each initializer for both
std::initializer_list and arrays. And extends
CompareImplicitConversionSequence to compares array size, for two
conversions to array type.
As noted in this patch, there's a defect in the std concerning the
partial orderability of conversion sequences. DR2492 has a suggested
direction that will be simple to add once it (hopefully) is accepted.
Differential Revision: https://reviews.llvm.org/D103088
Currently, we have no front-end type for ppc_fp128 type in IR. PowerPC
target generates ppc_fp128 type from long double now, but there's option
(-mabi=(ieee|ibm)longdouble) to control it and we're going to do
transition from IBM extended double-double ppc_fp128 to IEEE fp128 in
the future.
This patch adds type __ibm128 which always represents ppc_fp128 in IR,
as what GCC did for that type. Without this type in Clang, compilation
will fail if compiling against future version of libstdcxx (which uses
__ibm128 in headers).
Although all operations in backend for __ibm128 is done by software,
only PowerPC enables support for it.
There's something not implemented in this commit, which can be done in
future ones:
- Literal suffix for __ibm128 type. w/W is suitable as GCC documented.
- __attribute__((mode(IF))) should be for __ibm128.
- Complex __ibm128 type.
Reviewed By: rjmccall
Differential Revision: https://reviews.llvm.org/D93377
