This test is passing now on linux. The same test is claimed to be flaky
on darwin, so it's possible that's true on linux too. If that's the case
we'll have to skip it here too (or fix it).
I mark the test as not-debug-info-dependent as a drive-by.
llvm-svn: 349482
max number of stack frames to backtrace, make it a setting,
target.process.thread.max-backtrace-depth.
Add a test case for the setting.
<rdar://problem/28759559>
llvm-svn: 343029
Summary:
1) Several tests that are flakey on windows fail the run even if they are marked as expected to be flakey. This is because they fail frequently enough that even a retry won't help
2) Skip several tests on Windows that will occasionally hang rather than failing or exiting. This is causing the entire test suite to hang
Reviewers: asmith, labath, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D50198
llvm-svn: 338769
Summary:
The test suite has often unnecessary trailing whitespace, and sometimes
unnecessary trailing lines or a missing final new line. This patch just strips
trailing whitespace/lines and adds missing newlines at the end.
Subscribers: ki.stfu, JDevlieghere, christof, lldb-commits
Differential Revision: https://reviews.llvm.org/D49943
llvm-svn: 338171
pseudo_barrier_wait() begins by decrementing an atomic variable. Since
these are always_inline in libc++, there is no line table anchor to
break on before we decrement it. This meant that on gcc we stopped after
the variable has been decremented, which meant that thread2 could have
exited, violating the test setup. On clang this wasn't a problem
because it generated some line table entries for the do{}while(0) loop
in the macro, so we still ended up stopping, before we touched the
variable.
I fix this by adding a dummy statement before the pseudo_barrier_wait()
command and setting the breakpoint there.
llvm-svn: 335476
Filenames with test results contain only the class name which makes it more
difficult to find it if the same class name is present in multiple *.py files.
packages/Python/lldbsuite/test/functionalities/step-avoids-no-debug/TestStepNoDebug.py
-class ReturnValueTestCase(TestBase):
+class StepAvoidsNoDebugTestCase(TestBase):
as ReturnValueTestCase is already present in:
packages/Python/lldbsuite/test/functionalities/return-value/TestReturnValue.py
packages/Python/lldbsuite/test/functionalities/thread/crash_during_step/TestCrashDuringStep.py
-class CreateDuringStepTestCase(TestBase):
+class CrashDuringStepTestCase(TestBase):
as CreateDuringStepTestCase is already present in:
packages/Python/lldbsuite/test/functionalities/thread/create_during_step/TestCreateDuringStep.py
packages/Python/lldbsuite/test/functionalities/thread/step_until/TestStepUntil.py
-class TestCStepping(TestBase):
+class StepUntilTestCase(TestBase):
as TestCStepping is already present in:
packages/Python/lldbsuite/test/lang/c/stepping/TestStepAndBreakpoints.py
llvm-svn: 335431
The problem was that with libc++ the std::unique_lock declaration was
completely inlined, so there was no line table entry in the main.cpp
file to set a breakpoint on. Therefore, the breakpoint got moved to the
next line, but that meant the test would deadlock as the thread would
stop with the lock already held.
I fix that issue by adding a dummy statement before the std::unique_lock
line to anchor the breakpoint.
I think this should fix the issue because of which this test was
disabled on darwin, but someone should verify that before enabling it.
llvm-svn: 335132
Summary: They all correspond to bugs that are already logged and I've added the appropriate (or most appropriate) bug numbers. This leaves only a handful of failing tests.
Reviewers: asmith, zturner, labath
Reviewed By: zturner
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D47892
llvm-svn: 334210
Summary:
- Fix test jump for powerpc64le
Jumping directly to the return line on power architecture dos not means
returning the value that is seen on the code. The last test fails, because
it needs the execution of some assembly in the beginning of the function.
Avoiding this test for this architecture.
- Avoid evaluate environ variable name on Linux
On Linux the Symbol environ conflicts with another variable, then in
order to avoid it, this test was moved into a specific test, which is not
supported if the OS is Linux.
- Added PPC64le as MIPS behavior
Checking the disassembler output, on PPC64le machines behaves as MPIS.
Added method to identify PPC64le architecture and checking it when
disassembling instructions in the test case.
Reviewers: labath
Reviewed By: labath
Subscribers: clayborg, labath, luporl, alexandreyy, sdardis, ki.stfu, arichardson
Differential Revision: https://reviews.llvm.org/D44101
Patch by Leonardo Bianconi <leonardo.bianconi@eldorado.org.br>.
llvm-svn: 327977
These tests all test very similar things, and use the same inferior.
They were only placed in separate folders to achieve better
paralelization. Now that we paralelize at a file level, this is no
longer relevant, and we can put them together again.
llvm-svn: 326159
This patch is the result of a discussion on lldb-dev, see
http://lists.llvm.org/pipermail/lldb-dev/2018-January/013111.html for
background.
For each test (should be eventually: each test configuration) a
separate build directory is created and we execute
make VPATH=$srcdir/path/to/test -C $builddir/path/to/test -f $srcdir/path/to/test/Makefile -I $srcdir/path/to/test
In order to make this work all LLDB tests need to be updated to find
the executable in the test build directory, since CWD still points at
the test's source directory, which is a requirement for unittest2.
Although we have done extensive testing, I'm expecting that this first
attempt will break a few bots. Please DO NOT HESITATE TO REVERT this
patch in order to get the bots green again. We will likely have to
iterate on this some more.
Differential Revision: https://reviews.llvm.org/D42281
llvm-svn: 323803
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Now that the wathpoint tests have their own category, we can easily skip
them on devices which don't have watchpoint support. Therefore, we don't
need an android xfail on each of these tests.
llvm-svn: 317276
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
This patch introduces a new thread backtrace command "unique".
The command is based off of "thread backtrace all" but will instead
find all threads which share matching call stacks and de-duplicate
their output, listing call stack and all the threads which share it.
This is especially useful for apps which use thread/task pools
sitting around waiting for work and cause excessive duplicate output.
I needed this behavior recently when debugging a core with 700+ threads.
Differential Revision: https://reviews.llvm.org/D33426
Reviewers: clayborg, jingham
Patch by Brian Gianforcaro <b.gianfo@gmail.com>
llvm-svn: 305197
Summary:
This aims to replace the different decorators we've had on each libc++
test with a single solution. Each libc++ will be assigned to the
"libc++" category and a single central piece of code will decide whether
we are actually able to run libc++ test in the given configuration by
enabling or disabling the category (while giving the user the
opportunity to override this).
I started this effort because I wanted to get libc++ tests running on
android, and none of the existing decorators worked for this use case:
- skipIfGcc - incorrect, we can build libc++ executables on android
with gcc (in fact, after this, we can now do it on linux as well)
- lldbutil.skip_if_library_missing - this checks whether libc++.so is
loaded in the proces, which fails in case of a statically linked
libc++ (this makes copying executables to the remote target easier to
manage).
To make this work I needed to split out the pseudo_barrier code from the
force-included file, as libc++'s atomic does not play well with gcc on
linux, and this made every test fail, even though we need the code only
in the threading tests.
So far, I am only annotating one of the tests with this category. If
this does not break anything, I'll proceed to update the rest.
Reviewers: jingham, zturner, EricWF
Subscribers: srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D30984
llvm-svn: 299028
Summary:
Check whether the setting the breakpoint failed during instruction emulation. If
it did, the next pc is likely in unmapped memory, and the inferior will crash
anyway after the next instruction. Do not return an error in this case, but just
continue stepping.
Reenabled the crash during step test for android/linux.
Reviewers: labath
Subscribers: aemerson, rengolin, tberghammer, danalbert, srhines, lldb-commits
Differential Revision: https://reviews.llvm.org/D25926
Author: Jason Majors <jmajors@google.com>
llvm-svn: 285187
Otherwise, they tend to generate filename too long errors.
They already contain the same test name in the directory, file, and class names,
so no information is really lost here.
llvm-svn: 284987
by grubbing the break list output. If you pass a number of locations into
the run_break_* functions, they will check that this is right for you.
llvm-svn: 284791
The lldbutil.run_break_set_by_file_and_line has already checked that the number of
locations was 1, so don't check it again. And certainly don't check it again by
grubbing in break list output.
Also, we know the Thread's IsStopped state is wrong, and have a test for that, so
don't keep testing it in other files where that isn't the primary thing we're testing.
I removed the xfail for Darwin. If this also passes on other systems, we can remove
the xfails from them as we find that out.
llvm-svn: 282993
Remove the test for thread stopped states from this test.
That isn't set properly now, and its setting doesn't matter till we actually support non-stop debugging, so
we shouldn't have unrelated tests failing from it.
Also changed some code that was trying and failing to grub command line output, and replaced
it by SB API calls.
llvm-svn: 282976
