Rewrites test to use correct architecture triple; fixes incorrect
reference in SourceLevelDebugging doc; simplifies `spillReg` behaviour
so as to not be dependent on changes elsewhere in the patch stack.
This reverts commit d2000b45d033c06dc7973f59909a0ad12887ff51.
This patch adds a new instruction that can represent variadic debug values,
DBG_VALUE_VAR. This patch alone covers the addition of the instruction and a set
of basic code changes in MachineInstr and a few adjacent areas, but does not
correctly handle variadic debug values outside of these areas, nor does it
generate them at any point.
The new instruction is similar to the existing DBG_VALUE instruction, with the
following differences: the operands are in a different order, any number of
values may be used in the instruction following the Variable and Expression
operands (these are referred to in code as “debug operands”) and are indexed
from 0 so that getDebugOperand(X) == getOperand(X+2), and the Expression in a
DBG_VALUE_VAR must use the DW_OP_LLVM_arg operator to pass arguments into the
expression.
The new DW_OP_LLVM_arg operator is only valid in expressions appearing in a
DBG_VALUE_VAR; it takes a single argument and pushes the debug operand at the
index given by the argument onto the Expression stack. For example the
sub-expression `DW_OP_LLVM_arg, 0` has the meaning “Push the debug operand at
index 0 onto the expression stack.”
Differential Revision: https://reviews.llvm.org/D82363
The IR/MIR pseudo probe intrinsics don't get materialized into real machine instructions and therefore they don't incur runtime cost directly. However, they come with indirect cost by blocking certain optimizations. Some of the blocking are intentional (such as blocking code merge) for better counts quality while the others are accidental. This change unblocks perf-critical optimizations that do not affect counts quality. They include:
1. IR InstCombine, sinking load operation to shorten lifetimes.
2. MIR LiveRangeShrink, similar to #1
3. MIR TwoAddressInstructionPass, i.e, opeq transform
4. MIR function argument copy elision
5. IR stack protection. (though not perf-critical but nice to have).
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D95982
FEntryInserter prepends FENTRY_CALL to the first basic block. In case
there are other instructions, PostRA Machine Instruction Scheduler can
move FENTRY_CALL call around. This actually occurs on SystemZ (see the
testcase). This is bad for the following reasons:
* FENTRY_CALL clobbers registers.
* Linux Kernel depends on whatever FENTRY_CALL expands to to be the very
first instruction in the function.
Fix by adding isCall attribute to FENTRY_CALL, which prevents reordering
by making it a scheduling boundary for PostRA Machine Instruction
Scheduler.
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D91218
- Basically iterate each pair of memory operands from both instructions
and return true if any of them may alias.
- The exception are memory instructions without any memory operand. They
may touch everything and could alias to any memory instruction.
Differential Revision: https://reviews.llvm.org/D89447
Current limit on amount of tied operands (15) sometimes is too low
for statepoint. We may get couple dozens of gc pointer operands on
statepoint.
Review D87154 changed format of statepoint to list every gc pointer
only once, which makes it trivial to find tiedness relation between
statepoint operands: defs are mapped 1-1 to gc pointer operands passed
on registers.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D87915
we now get noAlias result for a call instruction and other
load/store/call instructions if we query mayAlias.
This is not right as call instruction is not with mayloadorstore,
but it may alter the memory.
This patch fixes this wrong alias query.
Differential Revision: https://reviews.llvm.org/D87490
Add a DBG_INSTR_REF instruction and a "debug instruction number" field to
MachineInstr. The two allow variable values to be specified by
identifying where the value is computed, rather than the register it lies
in, like so:
%0 = fooinst, debug-instr-number 1
[...]
DBG_INSTR_REF 1, 0
See the original RFC for motivation:
http://lists.llvm.org/pipermail/llvm-dev/2020-February/139440.html
This patch is NFCI; it only adds fields and other boiler plate.
Differential Revision: https://reviews.llvm.org/D85741
MBBs are not allowed to have non-terminator instructions after the first
terminator. Currently in some cases (see the modified test),
EmitSchedule can add DBG_VALUEs after the last terminator, for example
when referring a debug value that gets folded into a TCRETURN
instruction on ARM.
This patch updates EmitSchedule to move inserted DBG_VALUEs just before
the first terminator. I am not sure if there are terminators produce
values that can in turn be used by a DBG_VALUE. In that case, moving the
DBG_VALUE might result in referencing an undefined register. But in any
case, it seems like currently there is no way to insert a proper DBG_VALUEs
for such registers anyways.
Alternatively it might make sense to just remove those extra DBG_VALUES.
I am not too familiar with the details of debug info in the backend and
would appreciate any suggestions on how to address the issue in the best
possible way.
Reviewers: vsk, aprantl, jpaquette, efriedma, paquette
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83561
Following on from this RFC[0] from a while back, this is the first patch towards
implementing variadic debug values.
This patch specifically adds a set of functions to MachineInstr for performing
operations specific to debug values, and replacing uses of the more general
functions where appropriate. The most prevalent of these is replacing
getOperand(0) with getDebugOperand(0) for debug-value-specific code, as the
operands corresponding to values will no longer be at index 0, but index 2 and
upwards: getDebugOperand(x) == getOperand(x+2). Similar replacements have been
added for the other operands, along with some helper functions to replace
oft-repeated code and operate on a variable number of value operands.
[0] http://lists.llvm.org/pipermail/llvm-dev/2020-February/139376.html<Paste>
Differential Revision: https://reviews.llvm.org/D81852
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
This temporarily reverts commit 7019cea26dfef5882c96f278c32d0f9c49a5e516.
It seems that, for some targets, there are instructions with a lot of memory operands (probably more than would be expected). This causes a lot of buildbots to timeout and notify failed builds. While investigations are ongoing to find out why this happens, revert the changes.
Summary:
To support all targets, the mayAlias member function needs to support instructions with multiple operands.
This revision also changes the order of the emitted instructions in some test cases.
Reviewers: efriedma, hfinkel, craig.topper, dmgreen
Reviewed By: efriedma
Subscribers: MatzeB, dmgreen, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80161
Summary:
Add a check to make sure that MachineInstr::mayAlias returns prematurely if at least one of its instruction parameters does not access memory. This prevents calls to TargetInstrInfo::areMemAccessesTriviallyDisjoint with incompatible instructions.
A side effect of this change is to render the mayAlias helper in the AArch64 load/store optimizer obsolete. We can now directly call the MachineInstr::mayAlias member function.
Reviewers: hfinkel, t.p.northover, mcrosier, eli.friedman, efriedma
Reviewed By: efriedma
Subscribers: efriedma, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78823
Summary:
The INLINEASM MIR instructions use immediate operands to encode the values of some operands.
The MachineInstr pretty printer function already handles those operands and prints human readable annotations instead of the immediates. This patch adds similar annotations to the output of the MIRPrinter, however uses the new MIROperandComment feature.
Reviewers: SjoerdMeijer, arsenm, efriedma
Reviewed By: arsenm
Subscribers: qcolombet, sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78088
This will address the issue: P8198 and P8199 (from D73534).
The methods was not handle bundles properly.
Differential Revision: https://reviews.llvm.org/D74904
Add a dump method that recursively prints an instruction and all
the instructions defining its operands and so on.
This is helpful when looking at combiner issue.
NFC
Differential Revision: https://reviews.llvm.org/D75094
Add the isCandidateForCallSiteEntry predicate to MachineInstr to
determine whether a DWARF call site entry should be created for an
instruction.
For now, it's enough to have any call instruction that doesn't belong to
a blacklisted set of opcodes. For these opcodes, a call site entry isn't
meaningful.
Differential Revision: https://reviews.llvm.org/D74159
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
The SmallVector reserve() call in
MachineInstrExpressionTrait::getHashValue accounted for over 3% of all
calls to malloc() when I compiled a bunch of graphics shaders for the
AMDGPU target. Its initial size was only enough for machine instructions
with up to 7 operands, but for AMDGPU 8 and 10 operands are very common.
Here's a histogram of number of operands for each call to getHashValue,
gathered from the same collection of shaders:
1 13503
2 254273
3 135781
4 422508
5 614997
6 194953
7 287248
8 1517255
9 31218
10 1191269
11 70731
12 24
13 77
15 84
17 4692
27 16
33 705
49 6
Typical instructions with 8 and 10 operands are floating point
arithmetic and multiply-accumulate instructions like:
%83:vgpr_32 = V_MUL_F32_e64 0, killed %82:vgpr_32, 0, killed %81:vgpr_32, 0, 0, implicit $exec
%330:vgpr_32 = V_MAC_F32_e64 0, killed %327:vgpr_32, 0, killed %329:sgpr_32, 0, %328:vgpr_32(tied-def 0), 0, 0, implicit $exec
Differential Revision: https://reviews.llvm.org/D70301
Summary:
This patch adds MIR parsing and printing for heap alloc markers, which were
added in D69136. They are printed as an operand similar to pre-/post-instr
symbols, with a heap-alloc-marker token and a metadata node.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69864
Summary:
Fixes some things from original commit at https://reviews.llvm.org/D69136. The main
change is that the heap alloc marker is always stored as ExtraInfo in the machine
instruction instead of in the PointerSumType because it cannot hold more than
4 pointer types.
Add instruction marker to MachineInstr ExtraInfo. This does almost the
same thing as Pre/PostInstrSymbols, except that it doesn't create a label until
printing instructions. This allows for labels to be put around instructions that
are deleted/duplicated somewhere.
Use this marker to track heap alloc site call instructions.
Reviewers: rnk
Subscribers: MatzeB, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69536
Summary:
Add instruction marker to MachineInstr ExtraInfo. This does almost the
same thing as Pre/PostInstrSymbols, except that it doesn't create a label until
printing instructions. This allows for labels to be put around instructions that
are deleted/duplicated somewhere.
Also undo the workaround in r375137.
Reviewers: rnk
Subscribers: MatzeB, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69136
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
The missing line added by this patch ensures that only spilt variable
locations are candidates for being restored from the stack. Otherwise,
register or constant-value information can be interpreted as a spill
location, through a union.
The added regression test replicates a scenario where this occurs: the
stack load from [rsp] causes the register-location DBG_VALUE to be
"restored" to rsi, when it should be left alone. See PR43058 for details.
Un x-fail a test that was suffering from this from a previous patch.
Differential Revision: https://reviews.llvm.org/D66895
llvm-svn: 370648
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
Over a year ago, MachineInstr gained a fourth boolean parameter that occurs
before the TII pointer. When this happened, several places started accidentally
passing TII into this boolean parameter instead of the TII parameter.
llvm-svn: 362312
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Summary:
This emits labels around heapallocsite calls and S_HEAPALLOCSITE debug
info in codeview. Currently only changes FastISel, so emitting labels still
needs to be implemented in SelectionDAG.
Reviewers: rnk
Subscribers: aprantl, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61083
llvm-svn: 359149
Summary:
The basic idea here is to make it possible to use
MachineInstr::mayAlias also when the MachineInstr
is const (or the "Other" MachineInstr is const).
The addition of const in MachineInstr::mayAlias
then rippled down to the need for adding const
in several other places, such as
TargetTransformInfo::getMemOperandWithOffset.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, MatzeB, arsenm, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60856
llvm-svn: 358744
