Also add a test. There should also be control for this
in ProcessLaunchInfo and a "target launch" flag, but at least
this will allow you to control it somehow.
<rdar://problem/35842137>
llvm-svn: 319731
Summary:
This flag is on by default for darwin and freebsd, but off for linux.
Without it, clang will sometimes not emit debug info for types like
std::string. Whether it does this, and which tests will fail because of
that depends on the linux distro and c++ library version.
A bunch of tests were already setting these flags manually, but here
instead I take a whole sale approach and enable this flag for all tests.
Any test which does not want to have this flag (right now we have one
such test) can turn it off explicitly via
CFLAGS_EXTRAS+=$(LIMIT_DEBUG_INFO_FLAGS)
This fixes a bunch of data formatter tests on red-hat.
Reviewers: davide, jankratochvil
Subscribers: emaste, aprantl, krytarowski, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D40717
llvm-svn: 319653
unambiguously on one bit of code. On macOS these
lines mapped to two distinct locations, and that
was artificially throwing off the test.
llvm-svn: 319472
Summary:
New linux kernels (on systems that support the XSAVES instruction) will
not update the inferior registers unless the corresponding flag in the
XSAVE header is set. Normally this flag will be set in our image of the
XSAVE area (since we obtained it from the kernel), but if the inferior
has never used the corresponding register set, the respective flag can
be clear.
This fixes the issue by making sure we explicitly set the flags
corresponding to the registers we modify. I don't try to precisely match
the flags to set on each write, as the rules could get quite complicated
-- I use a simpler over-approximation instead.
This was already caught by test_fp_register_write, but that was only
because the code that ran before main() did not use some of the register
sets. Since nothing in this test relies on being stopped in main(), I
modify the test to stop at the entry point instead, so we can be sure
the inferior did not have a chance to access these registers.
Reviewers: clayborg, valentinagiusti
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D40434
llvm-svn: 319161
r317561 exposed an interesting bug (pr35228) in handling of simultaneous
watchpoint hits. Disabling the test until we can get that fixed.
llvm-svn: 317683
Summary:
The test incremented an atomic varible to trigger the watchpoint event.
On arm64 this compiled to a ldaxr/stlxr loop, with the watchpoint being
triggered in the middle of the loop. Hitting the watchpoint resets the
exclusive monitor, and forces the process to loop one more time, hitting
the watchpoint again, etc.
While it would be nice if the debugger was able to resume from this
situation, this is not trivial, and is not what this test is about.
Therefore, I propose to change this to a simple store to a normal
variable (which should still trip the watchpoint everywhere, but without
atomic loops) and file a bug to investigate the possibilities of
handling the watchpoints in atomic loops in a more reasonable way.
Reviewers: clayborg
Subscribers: aemerson, kristof.beyls, lldb-commits
Differential Revision: https://reviews.llvm.org/D39680
llvm-svn: 317561
Summary:
This mechanism was mostly redundant with the file-based .categories
mechanism, and it was interfering with it, as any test which implemented
a getCategories method would not inherit the filesystem categories.
This patch removes it. The existing categories are preserved either by
adding a .categories file, or using the @add_test_categories decorator.
Reviewers: jingham, clayborg, zturner
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D39515
llvm-svn: 317277
Now that the wathpoint tests have their own category, we can easily skip
them on devices which don't have watchpoint support. Therefore, we don't
need an android xfail on each of these tests.
llvm-svn: 317276
Summary:
std::queue is just a fancy wrapper around another container, so all we
need to do is to delegate to the it.
Reviewers: jingham, EricWF
Subscribers: srhines, mgorny, lldb-commits, eugene
Differential Revision: https://reviews.llvm.org/D35666
llvm-svn: 317099
Most of the watchpoint tests are organized into subtrees, so we can use the
file-based .categories approach to annotate them. The exception are the
concurrent_events tests, which needed to be annotated on a per-test basis.
The motivation behind this is to provide an easy way to disable watchpoint
tests on systems where the watchpoint functionality is not present/unreliable.
llvm-svn: 317004
Summary:
This adds a data formatter for the implementation of forward_list in
libc++. I've refactored the existing std::list data formatter a bit to
enable more sharing of code (mainly the loop detection stuff).
Reviewers: jingham, EricWF
Subscribers: srhines, eugene, lldb-commits
Differential Revision: https://reviews.llvm.org/D35556
llvm-svn: 316992
The test was asserting that we can only find one frame in the minidump.
Now that we have the default unwind plan from the ABI plugin, we are
able to find 5 more frames using the frame pointer chaining. Correct the
expectation in the test.
llvm-svn: 316688
The core of this change is the new CommandInterpreter::m_command_state,
which models the state transitions for interactive commands, including
an "interrupted" state transition.
In general, command interruption requires cooperation from the code
executing the command, which needs to poll for interruption requests
through CommandInterpreter::WasInterrupted().
CommandInterpreter::PrintCommandOutput() implements an optionally
interruptible printing of the command output, which for large outputs
was likely the longest blocking part.
(ex. target modules dump symtab on a complex binary could take 10+ minutes)
Differential Revision: https://reviews.llvm.org/D37923
llvm-svn: 315037
running watchos. These tests cannot run on normal customer devices,
but I hope to some day have a public facing bot running against a
device.
llvm-svn: 314355
in TestDataFormatterSkipSummary.py - I'm building this test
with the default c++ library.
Skip TestMTCSimple.py when running for i386.
llvm-svn: 314155
Normal customer devices won't be able to run these tests, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314132
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point. Both devices pass the testsuite without
any errors or failures.
I have seen some instability with the armv7 test runs, I may submit additional patches
to address this. arm64 looks good.
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 314038
Normal customer devices won't be able to run these devices, we're hoping to get
a public facing bot set up at some point.
There will be some smaller follow-on patches. The changes to tools/lldb-server are
verbose and I'm not thrilled with having to skip all of these tests manually.
There are a few places where I'm making the assumption that "armv7", "armv7k", "arm64"
means it's an ios device, and I need to review & clean these up with an OS check
as well. (Android will show up as "arm" and "aarch64" so by pure luck they shouldn't
cause problems, but it's not an assumption I want to rely on).
I'll be watching the bots for the rest of today; if any problems are introduced by
this patch I'll revert it - if anyone sees a problem with their bot that I don't
see, please do the same. I know it's a rather large patch.
One change I had to make specifically for iOS devices was that debugserver can't
create files. There were several tests that launch the inferior process redirecting
its output to a file, then they retrieve the file. They were not trying to test
file redirection in these tests, so I rewrote those to write their output to a file
directly.
llvm-svn: 313932
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug). Also included a few small,
related fixes around how the errors propagate in this case.
Fixed the FreeBSD/Windows break: the intention was to keep
Process::WillResume() and Process::DoResume() "in-sync", but this had the
unfortunate consequence of breaking Process sub-classes which don't override
WillResume().
The safer approach is to keep Process::WillResume() untouched and only
override it in the minidump and core implementations.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313655
When introduced, breakpoint names were just tags that you could
apply to breakpoints that would allow you to refer to a breakpoint
when you couldn't capture the ID, or to refer to a collection of
breakpoints.
This change makes the names independent holders of breakpoint options
that you can then apply to breakpoints when you add the name to the
breakpoint. It adds the "breakpoint name configure" command to set
up or reconfigure breakpoint names. There is also full support for
then in the SB API, including a new SBBreakpointName class.
The connection between the name and the breakpoints
sharing the name remains live, so if you reconfigure the name, all the
breakpoint options all change as well. This allows a quick way
to share complex breakpoint behavior among a bunch of breakpoints, and
a convenient way to iterate on the set.
You can also create a name from a breakpoint, allowing a quick way
to copy options from one breakpoint to another.
I also added the ability to make hidden and delete/disable protected
names. When applied to a breakpoint, you will only be able to list,
delete or disable that breakpoint if you refer to it explicitly by ID.
This feature will allow GUI's that need to use breakpoints for their
own purposes to keep their breakpoints from getting accidentally
disabled or deleted.
<rdar://problem/22094452>
llvm-svn: 313292
The auto-continue test was using the new (better) name
for providing commands (-C) but I haven't checked in that change
yet. Put the test back to the old way for now.
llvm-svn: 313221
The main change is to avoid setting the process state as running when
debugging core/minidumps (details in the bug).
Also included a few small, related fixes around how the errors propagate in
this case.
patch by lemo
Bug: https://bugs.llvm.org/show_bug.cgi?id=34532
Differential Revision: https://reviews.llvm.org/D37651
llvm-svn: 313210
On Windows a process can't delete its own current direcotry, that's why the test
needs to return to the original direcotry before removing newdir.
llvm-svn: 313113
The FXSAVE member `ftw` (FPU Tag Word) was given the wrong size (8-bit)
instead of the correct width (16-bit) as per the x87 Programmer's
Manual. Adjust this to ensure that we print out the complete value for
the register.
llvm-svn: 311579
This is the FreeBSD equivalent of r238549.
This serves 2 purposes:
* LLDB should handle inferior process signals SIGSEGV/SIGILL/SIGBUS/
SIGFPE the way it is suppose to be handled. Prior to this fix these
signals will neither create a coredump, nor exit from the debugger
or work for signal handling scenario.
* eInvalidCrashReason need not report "unknown crash reason" if we have
a valid si_signo
llvm.org/pr23699
Patch by Karnajit Wangkhem
Differential Revision: https://reviews.llvm.org/D35223
llvm-svn: 310591
Summary:
The available platform list was previously only accessible via the
`platform list` command, this patch makes it possible to access that
list via the SBDebugger API. The active platform list has likewise
been exposed via the SBDebugger API.
Differential Revision: https://reviews.llvm.org/D35760
llvm-svn: 310452
You can get a breakpoint to auto-continue by adding "continue"
as a command, but that has the disadvantage that if you hit two
breakpoints simultaneously, the continue will force the process
to continue, and maybe even forstalling the commands on the other.
The auto-continue flag means the breakpoints can negotiate about
whether to stop.
Writing tests, I wanted to supply some commands when I made the
breakpoints, so I also added that ability.
llvm-svn: 309969
When an option was set at on a location, I was just copying the whole option set
to the location, and letting it shadow the breakpoint options. That was wrong since
it meant changes to unrelated options on the breakpoint would no longer take on this
location. I added a mask of set options and use that for option propagation.
I also added a "location" property to breakpoints, and added SBBreakpointLocation.{G,S}etCommandLineCommands
since I wanted to use them to write some more test cases.
<rdar://problem/24397798>
llvm-svn: 309772
Summary:
SBBreakpointLocation exposed the ignore count, but didn't expose
the hit count. Both values were exposed by SBBreakpoint and
SBWatchpoint, so this makes things a bit more consistent.
Reviewers: lldb-commits
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D31283
llvm-svn: 308480
