Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
The flushes previously existed to help ensure consistent error message
output when stdout and stderr were passed to the same location. This is
no longer necessary as errs() is now tied to outs().
Reviewed by: dblaikie, MaskRay, JDevlieghere, labath
Differential Revision: https://reviews.llvm.org/D80803
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Like non-verbose output, so that it is easy to recognize the `Line,Column,File,ISA,Discriminator` column values.
Reviewed By: JDevlieghere, jhenderson
Differential Revision: https://reviews.llvm.org/D80874
Update for upstream comments. Improve test by writing all the debug
info by hand.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80168
This will ensure that nothing can ever start parsing data from a future
sequence and part-read data will be returned as 0 instead.
Reviewed by: aprantl, labath
Differential Revision: https://reviews.llvm.org/D80796
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
For most tables, we already use commas in headers. This set of patches
unifies dumping the remaining ones.
Differential Revision: https://reviews.llvm.org/D80806
This patch extends the parsing and dumping support of llvm-dwarfdump
for debug_macro.dwo section.
Following forms are supported:
- DW_MACRO_define
- DW_MACRO_undef
- DW_MACRO_start_file
- DW_MACRO_end_file
- DW_MACRO_define_strx
- DW_MACRO_undef_strx
- DW_MACRO_define_strp
- DW_MACRO_undef_strp
Reviewed by: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D78500
A CIE with the Length == 0 is a terminator:
https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/ehframechpt.html
And GNU objdump recognizes them and prints the following for such entries:
"00000000 ZERO terminator"
This patch teaches llvm-objdump to do the same. I had to update tests to use
"CHECK-NEXT" too.
(Note: it looks perhaps not right that printing is done inside the DebugInfo library,
I'd expect to see the change in the llvm-objdump's code somewhere instead,
but that is how it done atm).
Differential revision: https://reviews.llvm.org/D80476
I've noticed an issue with "Data.getRelocatedValue(...)" call.
it might silently ignore an error when a content is truncated.
That leads to an infinite loop in the code (e.g. llvm-readobj hangs).
After fixing the issue I've found that actually we always tried
to read past the end of a section, even when a content was valid.
It happened because the terminator CIE (a CIE with the length == 0)
was never handled. At first I've tried just to stop adding the terminator
entry (and return), but it does not seem to be correct, because tools like
llvm-objdump might want to print something for such entries
(see comments in the code and test cases).
This patch fixes issues mentioned, provides new test cases for
both llvm-readobj and lib/DebugInfo and adds FIXMEs to existent
test cases related.
Differential revision: https://reviews.llvm.org/D80299
Demangling Itanium symbols either consumes the whole input or fails,
but Microsoft symbols can be successfully demangled with just some
of the input.
Add an outparam that enables clients to know how much of the input was
consumed, and use this flag to give llvm-undname an opt-in warning
on partially consumed symbols.
Differential Revision: https://reviews.llvm.org/D80173
The patch changes dumping of offsets in .debug_str_offsets sections so
that they are printed as 16-digit hex values if the contribution is in
the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length, debug_info_offset, and
debug_info_length fields in headers in .debug_pubname and
.debug_pubtypes sections so that they are printed as 16-digit hex values
if the contribution is in the DWARF64 format. Dumping of offsets in the
tables is changed in the same way.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of a unit_length field and offsets in headers
in .debug_loclists and .debug_rnglists sections so that they are printed
as 16-digit hex values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length and header_length fields in
headers in .debug_line sections so that they are printed as 16-digit hex
values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of the unit_length field in a unit header so
that it is printed as a 16-digit hex value if the unit is in the DWARF64
format.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of DWARF form values which sizes depend on
the DWARF format so that they are printed as 16-digit hex values for
DWARF64.
Differential Revision: https://reviews.llvm.org/D79997
The patch changes dumping of unit_length and debug_info_offset fields in
an address range header so that they are printed as 16-digit hex values
if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
Imagine we have a broken .eh_frame.
Below is a possible sample output of llvm-readelf:
```
...
entry 2 {
initial_location: 0x10f5
address: 0x2080
}
}
}
.eh_frame section at offset 0x2028 address 0x2028:
LLVM ERROR: Parsing entry instructions at 0 failed
PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace.
Stack dump:
0. Program arguments: /home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf -a 1
#0 0x000055f4a2ff5a1a llvm::sys::PrintStackTrace(llvm::raw_ostream&) (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x2b9a1a)
...
#15 0x00007fdae5dc209b __libc_start_main /build/glibc-B9XfQf/glibc-2.28/csu/../csu/libc-start.c:342:3
#16 0x000055f4a2db746a _start (/home/umb/LLVM/LLVM/llvm-project/build/bin/llvm-readelf+0x7b46a)
Aborted
```
I.e. it calls abort(), suggests to submit a bug report and exits with the code 134.
This patch changes the logic to propagate errors to callers.
This fixes the behavior for llvm-dwarfdump, llvm-readobj and other possible tools.
Differential revision: https://reviews.llvm.org/D79165
Summary: This implements searching for function symbols and public symbols by address.
More specifically,
-Implements NativeSession::findSymbolByAddress for function symbols and
public symbols. I think data symbols are also searched for, but isn't
implemented in this patch.
-Adds classes for NativeFunctionSymbol and NativePublicSymbol
-Adds a '-use-native-pdb-reader' option to llvm-symbolizer, for testing
purposes.
Reviewers: rnk, amccarth, labath
Subscribers: mgorny, hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79269
This patch adds support for dumping DW_MACRO_define_strx,
DW_MACRO_undef_strx in llvm-dwarfdump. These forms are currently
supported only in debug_macro section.
Reviewed By: ikudrin, dblaikie
Differential Revision: https://reviews.llvm.org/D78736
It looks like that was an initial intention, but some code paths in
`DWARFExpression::Operation::extract()` did not initialize `EndOffset`
properly.
Differential Revision: https://reviews.llvm.org/D79622
Reduces time to link PGO instrumented net_unittets.exe by 11% (9.766s ->
8.672s, best of three). Reduces peak memory by 65.7MB (2142.71MB ->
2076.95MB).
Use a more compact struct, BulkPublic, for faster sorting. Sort in
parallel. Construct the hash buckets in parallel. Try to use one vector
to hold all the publics instead of copying them from one to another.
Allocate all the memory needed to serialize publics up front, and then
serialize them in place in parallel.
Reviewed By: aganea, hans
Differential Revision: https://reviews.llvm.org/D79467
With a fix to uninitialized EndOffset.
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
DW_OP_call_ref is the only operation that has an operand which depends
on the DWARF format. The patch fixes handling that operation in DWARF64
units.
Differential Revision: https://reviews.llvm.org/D79501
