Use hasPhys instead of MCRegister::isPhysicalRegister.
I think the MCRegister returned from getPhys can only contain a physical
register or 0. hasPhys checks that the register returned from getPhys is non-zero.
So I think they are equivalent in this usage.
- Add `LiveIntervalsAnalysis`.
- Add `LiveIntervalsPrinterPass`.
- Use `LiveIntervalsWrapperPass` in legacy pass manager.
- Use `std::unique_ptr` instead of raw pointer for `LICalc`, so
destructor and default move constructor can handle it correctly.
This would be the last analysis required by `PHIElimination`.
Prepare for new pass manager version of `MachineDominatorTreeAnalysis`.
We may need a machine dominator tree version of `DomTreeUpdater` to
handle `SplitCriticalEdge` in some CodeGen passes.
This patch make `LiveDebugVariables` can be used by passes outside of
`lib/CodeGen`.
If we run a pass that occurs between the split register allocation pass
without preserving this pass, it will be freed and recomputed until it
encounters the next pass that needs LiveDebugVariables.
However, `LiveDebugVariables` will raise an assertion due to the pass
being freed without emitting a debug value.
This is reason we need `LiveDebugVariables` to be available for passes
outside of lib/Codegen.
Prior to this patch, variadic DIExpressions (i.e. ones that contain
DW_OP_LLVM_arg) could only be created by salvaging debug values to create
stack value expressions, resulting in a DBG_VALUE_LIST being created. As of
the previous patch in this patch stack, DBG_INSTR_REF's syntax has been
changed to match DBG_VALUE_LIST in preparation for supporting variadic
expressions. This patch adds some minor changes needed to allow variadic
expressions that aren't stack values to exist, and allows variadic expressions
that are trivially reduceable to non-variadic expressions to be handled
similarly to non-variadic expressions.
Reviewed by: jmorse
Differential Revision: https://reviews.llvm.org/D133926
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This was reverted twice, in 987cd7c3ed75b and 13815e8cbf8d4. The latter
stemed from not accounting for rare register classes in a pre-allocated
array, and the former from an array not being completely initialized,
leading to asan complaining.
This was applied in fda4305e53784, reverted in 13815e8cbf8d49, the problem
was that fp80 X86 registers that were spilt to the stack aren't expected by
LiveDebugValues. It pre-allocates a position number for all register sizes
that can be spilt, and 80 bits isn't exactly common.
The solution is to scan the register classes to find any unrecognised
register sizes, adn pre-allocate those position numbers, avoiding a later
assertion.
This reverts commit fda4305e5378478051be225248bfe9c1d401d938.
Green dragon has spotted a problem -- it's understood, but might be fiddly
to fix, reverting in the meantime.
DBG_PHI instructions can refer to stack slots, to indicate that multiple
values merge together on control flow joins in that slot. This is fine --
however the slot might be merged at a later date with a slot of a different
size. In doing so, we lose information about the size the eliminated PHI.
Later analysis passes have to guess.
Improve this by attaching an optional "bit size" operand to DBG_PHI, which
only gets added for stack slots, to let us know how large a size the value
on the stack is.
Differential Revision: https://reviews.llvm.org/D124184
This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
This header is very large (3M Lines once expended) and was included in location
where dwarf-specific information were not needed.
More specifically, this commit suppresses the dependencies on
llvm/BinaryFormat/Dwarf.h in two headers: llvm/IR/IRBuilder.h and
llvm/IR/DebugInfoMetadata.h. As these headers (esp. the former) are widely used,
this has a decent impact on number of preprocessed lines generated during
compilation of LLVM, as showcased below.
This is achieved by moving some definitions back to the .cpp file, no
performance impact implied[0].
As a consequence of that patch, downstream user may need to manually some extra
files:
llvm/IR/IRBuilder.h no longer includes llvm/BinaryFormat/Dwarf.h
llvm/IR/DebugInfoMetadata.h no longer includes llvm/BinaryFormat/Dwarf.h
In some situations, codes maybe relying on the fact that
llvm/BinaryFormat/Dwarf.h was including llvm/ADT/Triple.h, this hidden
dependency now needs to be explicit.
$ clang++ -E -Iinclude -I../llvm/include ../llvm/lib/Transforms/Scalar/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
after: 10978519
before: 11245451
Related Discourse thread: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
[0] https://llvm-compile-time-tracker.com/compare.php?from=fa7145dfbf94cb93b1c3e610582c495cb806569b&to=995d3e326ee1d9489145e20762c65465a9caeab4&stat=instructions
Differential Revision: https://reviews.llvm.org/D118781
Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
This is a performance patch -- LiveDebugVariables can behave quadratically
if a lot of debug instructions are inserted back into the same place, and
we have to repeatedly step-over hte ones we've already inserted.
To get around it, whenever we insert a debug instruction at a slot index,
check whether there are more debug instructions to insert at this point,
and insert them too. That avoids the repeated lookup and stepping through.
It relies on the container for unlinked debug instructions being recorded
in-order, which is how LiveDebugVariables currently does it.
Differential Revision: https://reviews.llvm.org/D114587
InstrRefBasedLDV is marginally slower than VarlocBasedLDV when analysing
optimised code -- however, it's much slower when analysing code compiled
-O0.
To avoid this: don't use instruction referencing for -O0 functions. In the
"pure" case of unoptimised code, this won't really harm the debugging
experience because most variables won't have been promoted off the stack,
so can't go missing. It becomes more complicated when optimised code is
inlined into functions marked optnone; however these are rare, and as -O0
doesn't run many optimisations there should be little damage to the debug
experience as a result.
I've taken the opportunity to refactor testing for instruction-referencing
into a MachineFunction method, which seems the most appropriate place to
put it.
Differential Revision: https://reviews.llvm.org/D108585
This is a cleanup patch -- we're now able to support all flavours of
variable location in instruction referencing mode. This patch updates
various tests for debug instructions to be broader: numerous code paths
try to ignore debug isntructions, and they now have to ignore the
additional DBG_PHI and DBG_INSTR_REFs that we can generate.
A small amount of rework happens for LiveDebugVariables: as we don't need
to track live intervals through regalloc any more, we can get away with
unlinking debug instructions before regalloc, then re-inserting them after.
Note that this isn't (yet) true of DBG_VALUE_LISTs, they still have to go
through live interval tracking.
In SelectionDAG, add a helper lambda that emits half-formed DBG_INSTR_REFs
for arguments in instr-ref mode, DBG_VALUE otherwise. This is one of the
final locations where DBG_VALUEs are emitted for vreg arguments.
X86InstrInfo now un-sets the debug instr number on SUB instructions that
get mutated into CMP instructions. As the instruction no longer computes a
subtraction, we can't use it for variable locations.
Differential Revision: https://reviews.llvm.org/D88898
The D35953, D62650 and D73691 introduced trimming of variables locations
in LiveDebugVariables pass, since there are some cases where after
the virtregrewrite we have exploded number of DBG_VALUEs created for some
inlined variables. As it looks, all problematic cases were regarding
inlined variables, so it seems reasonable to stop trimming the location
ranges for non-inlined variables.
It has very good impact on the llvm-locstats report.
Differential Revision: https://reviews.llvm.org/D102917
This patch introduces "DBG_PHI" instructions, a marker of where a PHI
instruction used to be, before PHI elimination. Under the instruction
referencing model, we want to know where every value in the function is
defined -- and a PHI, even if implicit, is such a place.
Just like instruction numbers, we can use this to identify a value to be
used as a variable value, but we don't need to know what instruction
defines that value, for example:
bb1:
DBG_PHI $rax, 1
[... more insts ... ]
bb2:
DBG_INSTR_REF 1, 0, !1234, !DIExpression()
This specifies that on entry to bb1, whatever value is in $rax is known
as value number one -- and the later DBG_INSTR_REF marks the position
where variable !1234 should take on value number one.
PHI locations are stored in MachineFunction for the duration of the
regalloc phase in the DebugPHIPositions map. The map is populated by
PHIElimination, and then flushed back into the instruction stream by
virtregrewriter. A small amount of maintenence is needed in
LiveDebugVariables to account for registers being split, but only for
individual positions, not for entire ranges of blocks.
Differential Revision: https://reviews.llvm.org/D86812
Reapply b623df3c, which was reverted while reverting a different patch
with a breaking change. There are no underlying issues with this patch,
so no changes have been made to the original patch.
This reverts commit b11e4c990771541e440861f017afea7b4ba162f4.
This patch fixes a crash in LiveDebugVariables for inputs where a
DBG_VALUE_LIST had 64 or more debug operands. This was triggering an
assert, which was added under the assumption that only bad CodeGen would
result in such a limit being hit, but relatively simple source files
that result in these incredibly long debug values have been found, so
this assert has been changed to a condition that drops the debug value
if it is not met.
Differential Revision: https://reviews.llvm.org/D101373
Pseudo probe are currently given a slot index like other regular instructions. This affects register pressure and lifetime weight computation because of enlarged lifetime length with pseudo probe instructions. As a consequence, program could get different code generated w/ and w/o pseudo probes. I'm closing the gap by excluding pseudo probes from stack index and downstream register allocation related passes.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D100334
This patch adds support for DBG_VALUE_LIST in the LiveDebugVariables pass. The
changes are mostly in computeIntervals, extendDef, and addDefsFromCopies; when
extending the def of a DBG_VALUE_LIST the live ranges of every used register
must be considered, and when such a def is killed by more than one of its used
registers being killed at the same time it is necessary to find valid copies of
all of those registers to create a new def with.
The DebugVariableValue class has also been changed to reference multiple
location numbers instead of just one. This has been accomplished by using a
C-style array with a unique_ptr and an array length packed into 6 bits, to
minimize the size of the class (which must be kept low to be used with
IntervalMap). This may not be the most efficient solution possible, and should
be looked at if performance issues arise.
Differential Revision: https://reviews.llvm.org/D83895
iterating the same PHI/LABEL/Debug instructions repeatedly.
We run into a compiling timeout problem when building a target after its
SampleFDO profile is updated. It is because some very large blocks with
a bunch of PHIs at the beginning. LiveDebugVariables::emitDebugValues
called during VirtRegRewriter phase searchs the insertion point for those
large BBs repeatedly in SkipPHIsLabelsAndDebug, and each time
SkipPHIsLabelsAndDebug needs to go through the same set of PHIs before it
can find the first non PHI/Label/Debug instruction. This patch adds a cache
to save the last position for the sequence which has been checked in the
previous call of SkipPHIsLabelsAndDebug.
Differential Revision: https://reviews.llvm.org/D94981
A crash/assertion failure in the greedy register allocator was tracked
down to a debug instr being passed to LiveIntervals::getInstructionIndex.
Normally this should not occur as debug instructions are collected and
removed by LiveDebugVariables before RA, and reinserted afterwards.
However, when a function has no debug info, LiveDebugVariables simply
strips any debug values that are present as they're not needed (this
situation will occur when a function with debug info is inlined into a
nodebug function). The problem is, it only removes DBG_VALUE instructions,
leaving DBG_LABELs (the cause of the crash).
This patch updates the LiveDebugVariables nodebug path to remove all debug
instructions. The test case verifies that DBG_VALUE/DBG_LABEL instructions
are present, and that they are stripped.
When -experimental-debug-variable-locations is enabled, certain variable
locations are represented by DBG_INSTR_REF instead of DBG_VALUE. The test
case verifies that a DBG_INSTR_REF is emitted by the option, and that it
is also stripped.
Differential Revision: https://reviews.llvm.org/D92127
Both FastRegAlloc and LiveDebugVariables/greedy need to cope with
DBG_INSTR_REFs. None of them actually need to take any action, other than
passing DBG_INSTR_REFs through: variable location information doesn't refer
to any registers at this stage.
LiveDebugVariables stashes the instruction information in a tuple, then
re-creates it later. This is only necessary as the register allocator
doesn't expect to see any debug instructions while it's working. No
equivalence classes or interval splitting is required at all!
No changes are needed for the fast register allocator, as it just ignores
debug instructions. The test added checks that both of them preserve
DBG_INSTR_REFs.
This also expands ScheduleDAGInstrs.cpp to treat DBG_INSTR_REFs the same as
DBG_VALUEs when rescheduling instructions around. The current movement of
DBG_VALUEs around is less than ideal, but it's not a regression to make
DBG_INSTR_REFs subject to the same movement.
Differential Revision: https://reviews.llvm.org/D85757
Also renamed the fields to follow style guidelines.
Accessors help with readability - weight mutation, in particular,
is easier to follow this way.
Differential Revision: https://reviews.llvm.org/D87725
Following on from this RFC[0] from a while back, this is the first patch towards
implementing variadic debug values.
This patch specifically adds a set of functions to MachineInstr for performing
operations specific to debug values, and replacing uses of the more general
functions where appropriate. The most prevalent of these is replacing
getOperand(0) with getDebugOperand(0) for debug-value-specific code, as the
operands corresponding to values will no longer be at index 0, but index 2 and
upwards: getDebugOperand(x) == getOperand(x+2). Similar replacements have been
added for the other operands, along with some helper functions to replace
oft-repeated code and operate on a variable number of value operands.
[0] http://lists.llvm.org/pipermail/llvm-dev/2020-February/139376.html<Paste>
Differential Revision: https://reviews.llvm.org/D81852
When compiling AMDGPUDisassembler.cpp in a stage 1 trunk build with
CMAKE_BUILD_TYPE=RelWithDebInfo LLVM_USE_SANITIZER=Address LiveDebugVariables
accounts for 21.5% wall clock time. This fix reduces that to 1.2% by switching
out a linked list lookup with a map lookup.
Note that the linked list is still used to group UserValues by vreg. The vreg
lookups don't cause any problems in this pathological case.
This is the same idea as D68816, which was reverted, except that it is a less
intrusive fix.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D77226
