Some final errors have turned up when doing stage2clang builds:
* We can insert before end(), which won't have an attached DPMarker,
thus we can have a nullptr DPMarker in Instruction::insertBefore. Add a
null check there.
* We need to use the iterator-returning form of getFirstNonPHI to ensure
we don't insert any PHIs behind debug-info at the start of a block.
We occasionally move instructions to their own positions, which is not
an error, and has no effect on the program. However, if dbg.value
intrinsics are present then they can effectively be moved without any
other effect on the program.
This is a problem if we're using non-instruction debug-info: a moveAfter
that appears to be a no-op in RemoveDIs mode can jump in front of
intrinsics in dbg.value mode. Thus: if an instruction is moved to itself
and the head bit is set, force attached debug-info to shift down one
instruction, which replicates the dbg.value behaviour.
There is support for intrinsics in Instruction::isCommunative, but there
is no equivalent implementation for isAssociative. This patch builds
support for associative intrinsics with TRE as an application. TRE can
now have associative intrinsics as an accumulator. For example:
```
struct Node {
Node *next;
unsigned val;
}
unsigned maxval(struct Node *n) {
if (!n) return 0;
return std::max(n->val, maxval(n->next));
}
```
Can be transformed into:
```
unsigned maxval(struct Node *n) {
struct Node *head = n;
unsigned max = 0; // Identity of unsigned std::max
while (true) {
if (!head) return max;
max = std::max(max, head->val);
head = head->next;
}
return max;
}
```
This example results in about 5x speedup in local runs.
We conservatively only consider min/max and as associative for this
patch to limit testing scope. There are probably other intrinsics that
could be considered associative. There are a few consumers of
isAssociative() that could be impacted. Testing has only required to
Reassociate pass be updated.
Here's a problem for the RemoveDIs project to make debug-info not be
stored in instructions -- in the following sequence:
dbg.value(foo
%bar = add i32 ...
dbg.value(baz
It's possible for rare passes (only CodeGenPrepare) to remove the add
instruction, and then re-insert it back in the same place. When
debug-info is stored in instructions and there's a total order on "when"
things happen this is easy, but by moving that information out of the
instruction stream we start having to do manual maintenance.
This patch adds some utilities for re-inserting an instruction into a
sequence of DPValue objects. Someday we hope to design this away, but
for now it's necessary to support all the things you can do with
dbg.values. The two unit tests show how DPValues get shuffled around
using the relevant function calls. A follow-up patch adds
instrumentation to CodeGenPrepare.
Part of the "RemoveDIs" project to remove debug intrinsics requires
passing block-positions around in iterators rather than as instruction
pointers, allowing some debug-info to reside in BasicBlock::iterator.
This means getInsertionPointAfterDef has to return an iterator, and as
it can return no-instruction that means returning an optional iterator.
This patch changes the signature for getInsertionPtAfterDef and then
patches up the various places that use it to handle the different type.
This would overall be an NFC patch, however in
InstCombinerImpl::freezeOtherUses I've started skipping any debug
intrinsics at the returned insert-position. This should not have any
_meaningful_ effect on the compiler output: at worst it means variable
assignments that are skipped will now cover the freeze instruction and
anything inserted before it, which should be inconsequential.
Sadly: this makes the function signature ugly. This is probably the
ugliest piece of fallout for the "RemoveDIs" work, but it serves the
overall purpose of improving compile times and not allowing `-g` to
affect compiler output, so should be worthwhile in the end.
This flag indicates that every bit is known to be zero in at least one
of the inputs. This allows the Or to be treated as an Add since there is
no possibility of a carry from any bit.
If the flag is present and this property does not hold, the result is
poison.
This makes it easier to reverse the InstCombine transform that turns Add
into Or.
This is inspired by a comment here
https://github.com/llvm/llvm-project/pull/71955#discussion_r1391614578
Discourse thread
https://discourse.llvm.org/t/rfc-add-or-disjoint-flag/75036
This trivial patch covers a bit of fallout from
https://reviews.llvm.org/D153990, where we moved the storage of trailing
DPValues into LLVMContext rather than being stored in each block. As a
result, you can now get a null DPMarker pointer from the end() iterator
where previously you didn't (and now it has to be explicitly created).
This is a sort-of stopgap measure -- there's another all-singing
all-dancing patch further down the line that refactors all of this so
that we don't allocate a DPMarker for every single Instruction. When
that lands this will all be refactored so that every time we request a
DPMarker, one is created if needs be. That's a performance-fix rather
than a functionality related patch though, so it'll come later.
This is the "central" patch to the removing-debug-intrinsics project: it
changes the instruction movement APIs (insert, move, splice) to interpret
the "Head" bits we're attaching to BasicBlock::iterators, and updates
debug-info records in the background to preserve the ordering of debug-info
(which is in DPValue objects instead of dbg.values). The cost is the
complexity of this patch, plus memory. The benefit is that LLVM developers
can cease thinking about whether they're moving debug-info or not, because
it'll happen behind the scenes.
All that complexity appears in BasicBlock::spliceDebugInfo, see the diagram
there for how we now manually shuffle debug-info around. Each potential
splice configuration gets tested in the added unit tests.
The rest of this patch applies the same reasoning in a variety of
scenarios. When moveBefore (and it's siblings) are used to move
instructions around, the caller has to indicate whether they intend for
debug-info to move too (is it a "Preserving" call or not), and then the
"Head" bits used to determine where debug-info moves to. Similar reasoning
is needed for insertBefore.
Differential Revision: https://reviews.llvm.org/D154353
Add an nneg flag to the zext instruction, which specifies that the
argument is non-negative. Otherwise, the result is a poison value.
The primary use-case for the flag is to preserve information when sext
gets replaced with zext due to range-based canonicalization. The nneg
flag allows us to convert the zext back into an sext later. This is
useful for some optimizations (e.g. a signed icmp can fold with sext but
not zext), as well as some targets (e.g. RISCV prefers sext over zext).
Discourse thread: https://discourse.llvm.org/t/rfc-add-zext-nneg-flag/73914
This patch is based on https://reviews.llvm.org/D156444 by
@Panagiotis156, with some implementation simplifications and additional
tests.
---------
Co-authored-by: Panagiotis K <karouzakispan@gmail.com>
...behind an experimental CMAKE option that's off by default.
This patch adds a new ilist-iterator-like class that can carry two extra bits
as well as the usual node pointer. This is part of the project to remove
debug-intrinsics from LLVM: see the rationale here [0], they're needed to
signal whether a "position" in a BasicBlock includes any debug-info before or
after the iterator.
This entirely duplicates ilist_iterator, attempting re-use showed it to be a
false economy. It's enable-able through the existing ilist_node options
interface, hence a few sites where the instruction-list type needs to be
updated. The actual main feature, the extra bits in the class, aren't part of
the class unless the cmake flag is given: this is because there's a
compile-time cost associated with it, and I'd like to get everything in-tree
but off-by-default so that we can do proper comparisons.
Nothing actually makes use of this yet, but will do soon, see the Phab patch
stack.
[0] https://discourse.llvm.org/t/rfc-instruction-api-changes-needed-to-eliminate-debug-intrinsics-from-ir/68939
Differential Revision: https://reviews.llvm.org/D153777
When IRBuilder is given an insertion position and there is debug-info, it
sets the DebugLoc of newly inserted instructions to the DebugLoc of the
insertion position. Unfortunately, that means if you insert in front of a
debug intrinsics, your "real" instructions get potentially-misleading
source locations from the debug intrinsics. Worse, if you compile -gmlt to
get source locations but no variable locations, you'll get different source
locations to a normal -g build, which is silly.
Rectify this with the getStableDebugLoc method, which skips over any debug
intrinsics to find the next "real" instruction. This is the source location
that you would get if you compile with -gmlt, and it remains stable in the
presence of debug intrinsics. The changed tests show a few locations where
this has been happening, for example selecting line-zero locations for
instrumentation on a perfectly valid call site.
Differential Revision: https://reviews.llvm.org/D159485
Move `AttributeMask` out of `llvm/IR/Attributes.h` to a new file
`llvm/IR/AttributeMask.h`. After doing this we can remove the
`#include <bitset>` and `#include <set>` directives from `Attributes.h`.
Since there are many headers including `Attributes.h`, but not needing
the definition of `AttributeMask`, this causes unnecessary bloating of
the translation units and slows down compilation.
This commit adds in the include directive for `llvm/IR/AttributeMask.h`
to the handful of source files that need to see the definition.
This reduces the total number of preprocessing tokens across the LLVM
source files in lib from (roughly) 1,917,509,187 to 1,902,982,273 - a
reduction of ~0.76%. This should result in a small improvement in
compilation time.
Differential Revision: https://reviews.llvm.org/D153728
There are multiple places in the code where the type of memory being accessed from an instruction needs to be obtained, including an upcoming patch to improve GEP cost modeling. This deduplicates the logic between them. It's not strictly NFC as EarlyCSE/LoopStrengthReduce may catch more intrinsics now.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D150583
This exposed another miscompile in GVN, which was fixed by
20e9b31f88149a1d5ef78c0be50051e345098e41.
-----
After D141386, violation of nonnull, range and align metadata
results in poison rather than immediate undefined behavior,
which means that these are now safe to retain when speculating.
We only need to remove UB-implying metadata like noundef.
This is done by adding a dropUBImplyingAttrsAndMetadata() helper,
which lists the metadata which is known safe to retain on speculation.
Differential Revision: https://reviews.llvm.org/D146629
This exposed a miscompile in GVN, which was fixed by D148129.
-----
After D141386, violation of nonnull, range and align metadata
results in poison rather than immediate undefined behavior,
which means that these are now safe to retain when speculating.
We only need to remove UB-implying metadata like noundef.
This is done by adding a dropUBImplyingAttrsAndMetadata() helper,
which lists the metadata which is known safe to retain on speculation.
Differential Revision: https://reviews.llvm.org/D146629
Currently, FunctionAttrs treats landingpads as non-throwing, and
will infer nounwind for functions with landingpads (assuming they
can't unwind in some other way, e.g. via resum). There are two
problems with this:
* Non-cleanup landingpads with catch/filter clauses do not
necessarily catch all exceptions. Unless there are catch ptr null
or filter [0 x ptr] zeroinitializer clauses, we should assume
that we may unwind past this landingpad. This seems like an
outright bug.
* Cleanup landingpads are skipped during phase one unwinding, so
we effectively need to support unwinding past them. Marking these
nounwind is technically correct, but not compatible with how
unwinding works in reality.
Fixes https://github.com/llvm/llvm-project/issues/61945.
Differential Revision: https://reviews.llvm.org/D147694
Since memory does not have an intrinsic type, we do not need to require value type matching on stores in order to sink them. To facilitate that, this patch finds stores which are sinkable, but have conflicting types, and bitcasts the ValueOperand so they are easily sinkable into a PHINode. Rather than doing fancy analysis to optimally insert the bitcast, we always insert right before the relevant store in the diamond branch. The assumption is that later passes (e.g. GVN, SimplifyCFG) will clean up bitcasts as needed.
Differential Revision: https://reviews.llvm.org/D147348
After D141386, violation of nonnull, range and align metadata
results in poison rather than immediate undefined behavior,
which means that these are now safe to retain when speculating.
We only need to remove UB-implying metadata like noundef.
This is done by adding a dropUBImplyingAttrsAndMetadata() helper,
which lists the metadata which is known safe to retain on speculation.
Differential Revision: https://reviews.llvm.org/D146629
In canCreateUndefOrPoison(), take not only poison-generating flags,
but also poison-generating metadata into account. The helpers are
written generically, but I believe the only case that can actually
matter is !range on calls -- !nonnull and !align are only valid on
loads, and those can create undef/poison anyway.
Unfortunately, this negatively impacts logical to bitwise and/or
conversion: For ctpop/ctlz/cttz we always attach !range metadata,
which will now block the transform, because it might introduce
poison. It would be possible to recover this regression by supporting
a ConsiderFlagsAndMetadata=false mode in impliesPoison() and clearing
flags/metadata on visited instructions.
Fixes https://github.com/llvm/llvm-project/issues/59888.
Differential Revision: https://reviews.llvm.org/D142115
This removes our "temporary" hack to assume that readnone/readonly
intrinsics are also willreturn. An explicit willreturn annotation,
usually via default intrinsic attributes, is now required.
Differential Revision: https://reviews.llvm.org/D137630
Currently the only way to do this is to work with the instruction list directly.
This is part of a series of cleanup patches towards making BasicBlock::getInstList() private.
Differential Revision: https://reviews.llvm.org/D138875
Previously reverted in 41f5a0004e442ae71c8e754fdadb4bd1e172fb2d. Fold in
D133576 previously reverted in d29d5ffb6332569e85d5eda5130603bbd8664635.
---
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Overview
It's possible to find intrinsics linked to an instruction by looking at the
MetadataAsValue uses of the attached DIAssignID. That covers instruction ->
intrinsic(s) lookup. Add a global DIAssignID -> instruction(s) map which gives
us the ability to perform intrinsic -> instruction(s) lookup. Add plumbing to
keep the map up to date through optimisations and add utility functions
including two that perform those lookups. Finally, add a unittest.
Details
In llvm/lib/IR/LLVMContextImpl.h add AssignmentIDToInstrs which maps DIAssignID
* attachments to Instruction *s. Because the DIAssignID * is the key we can't
use a TrackingMDNodeRef for it, and therefore cannot easily update the mapping
when a temporary DIAssignID is replaced.
Temporary DIAssignID's are only used in IR parsing to deal with metadata
forward references. Update llvm/lib/AsmParser/LLParser.cpp to avoid using
temporary DIAssignID's for attachments.
In llvm/lib/IR/Metadata.cpp add Instruction::updateDIAssignIDMapping which is
called to remove or add an entry (or both) to AssignmentIDToInstrs. Call this
from Instruction::setMetadata and add a call to setMetadata in Intruction's
dtor that explicitly unsets the DIAssignID so that the mappging gets updated.
In llvm/lib/IR/DebugInfo.cpp and DebugInfo.h add utility functions:
getAssignmentInsts(const DbgAssignIntrinsic *DAI)
getAssignmentMarkers(const Instruction *Inst)
RAUW(DIAssignID *Old, DIAssignID *New)
deleteAll(Function *F)
deleteAssignmentMarkers(const Instruction *Inst)
These core utils are tested in llvm/unittests/IR/DebugInfoTest.cpp.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D132224
This reverts commit 171f7024cc82e8702abebdedb699d37b50574be7.
Reverting this patch because it causes a cyclic dependency in the module build
https://green.lab.llvm.org/green/view/LLDB/job/lldb-cmake/48197/consoleFull#-69937453049ba4694-19c4-4d7e-bec5-911270d8a58c
In file included from <module-includes>:1:
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/include/llvm/IR/Argument.h:18:10: fatal error: cyclic dependency in module 'LLVM_IR': LLVM_IR -> LLVM_intrinsic_gen -> LLVM_IR
^
While building module 'LLVM_MC' imported from /Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/lib/MC/MCAsmInfoCOFF.cpp:14:
While building module 'LLVM_IR' imported from /Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/include/llvm/MC/MCPseudoProbe.h:57:
In file included from <module-includes>:12:
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/include/llvm/IR/DebugInfo.h:24:10: fatal error: could not build module 'LLVM_intrinsic_gen'
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
While building module 'LLVM_MC' imported from /Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/lib/MC/MCAsmInfoCOFF.cpp:14:
In file included from <module-includes>:15:
In file included from /Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/include/llvm/MC/MCContext.h:23:
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/include/llvm/MC/MCPseudoProbe.h:57:10: fatal error: could not build module 'LLVM_IR'
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
/Users/buildslave/jenkins/workspace/lldb-cmake/llvm-project/llvm/lib/MC/MCAsmInfoCOFF.cpp:14:10: fatal error: could not build module 'LLVM_MC'
~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
4 errors generated.
The Assignment Tracking debug-info feature is outlined in this RFC:
https://discourse.llvm.org/t/
rfc-assignment-tracking-a-better-way-of-specifying-variable-locations-in-ir
Overview
It's possible to find intrinsics linked to an instruction by looking at the
MetadataAsValue uses of the attached DIAssignID. That covers instruction ->
intrinsic(s) lookup. Add a global DIAssignID -> instruction(s) map which gives
us the ability to perform intrinsic -> instruction(s) lookup. Add plumbing to
keep the map up to date through optimisations and add utility functions
including two that perform those lookups. Finally, add a unittest.
Details
In llvm/lib/IR/LLVMContextImpl.h add AssignmentIDToInstrs which maps DIAssignID
* attachments to Instruction *s. Because the DIAssignID * is the key we can't
use a TrackingMDNodeRef for it, and therefore cannot easily update the mapping
when a temporary DIAssignID is replaced.
Temporary DIAssignID's are only used in IR parsing to deal with metadata
forward references. Update llvm/lib/AsmParser/LLParser.cpp to avoid using
temporary DIAssignID's for attachments.
In llvm/lib/IR/Metadata.cpp add Instruction::updateDIAssignIDMapping which is
called to remove or add an entry (or both) to AssignmentIDToInstrs. Call this
from Instruction::setMetadata and add a call to setMetadata in Intruction's
dtor that explicitly unsets the DIAssignID so that the mappging gets updated.
In llvm/lib/IR/DebugInfo.cpp and DebugInfo.h add utility functions:
getAssignmentInsts(const DbgAssignIntrinsic *DAI)
getAssignmentMarkers(const Instruction *Inst)
RAUW(DIAssignID *Old, DIAssignID *New)
deleteAll(Function *F)
These core utils are tested in llvm/unittests/IR/DebugInfoTest.cpp.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D132224
Transforms occasionally want to insert an instruction directly
after the definition point of a value. This involves quite a few
different edge cases, e.g. for phi nodes the next insertion point
is not the next instruction, and for invokes and callbrs its not
even in the same block. Additionally, the insertion point may not
exist at all if catchswitch is involved.
This adds a general Instruction::getInsertionPointAfterDef() API to
implement the necessary logic. For now it is used in two places
where this should be mostly NFC. I will follow up with additional
uses where this fixes specific bugs in the existing implementations.
Differential Revision: https://reviews.llvm.org/D129660
Based on the output of include-what-you-use.
This is a big chunk of changes. It is very likely to break downstream code
unless they took a lot of care in avoiding hidden ehader dependencies, something
the LLVM codebase doesn't do that well :-/
I've tried to summarize the biggest change below:
- llvm/include/llvm-c/Core.h: no longer includes llvm-c/ErrorHandling.h
- llvm/IR/DIBuilder.h no longer includes llvm/IR/DebugInfo.h
- llvm/IR/IRBuilder.h no longer includes llvm/IR/IntrinsicInst.h
- llvm/IR/LLVMRemarkStreamer.h no longer includes llvm/Support/ToolOutputFile.h
- llvm/IR/LegacyPassManager.h no longer include llvm/Pass.h
- llvm/IR/Type.h no longer includes llvm/ADT/SmallPtrSet.h
- llvm/IR/PassManager.h no longer includes llvm/Pass.h nor llvm/Support/Debug.h
And the usual count of preprocessed lines:
$ clang++ -E -Iinclude -I../llvm/include ../llvm/lib/IR/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
before: 6400831
after: 6189948
200k lines less to process is no that bad ;-)
Discourse thread on the topic: https://llvm.discourse.group/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D118652
The naming has come up as a source of confusion in several recent reviews. onlyWritesMemory is consist with onlyReadsMemory which we use for the corresponding readonly case as well.
This class is solely used as a lightweight and clean way to build a set of
attributes to be removed from an AttrBuilder. Previously AttrBuilder was used
both for building and removing, which introduced odd situation like creation of
Attribute with dummy value because the only relevant part was the attribute
kind.
Differential Revision: https://reviews.llvm.org/D116110
These flags are documented as generating poison values for particular input values. As such, we should really be consistent about their handling with how we handle nsw/nuw/exact/inbounds.
Differential Revision: https://reviews.llvm.org/D115460
This method parallels the dropPoisonGeneratingFlags on Instruction, but is hoisted to operator to handle constant expressions as well.
This is mostly code movement, but I did go ahead and add the inrange constexpr gep case. This had been discussed previously, but apparently never followed up o.
When hoisting/moving calls to locations, we strip unknown metadata. Such calls are usually marked `speculatable`, i.e. they are guaranteed to not cause undefined behaviour when run anywhere. So, we should strip attributes that can cause immediate undefined behaviour if those attributes are not valid in the context where the call is moved to.
This patch introduces such an API and uses it in relevant passes. See
updated tests.
Fix for PR50744.
Reviewed By: nikic, jdoerfert, lebedev.ri
Differential Revision: https://reviews.llvm.org/D104641
