The patch did not account for one corner case where cmp does not dominate
the loop latch. This patch adds this check, hopefully it's cheap because
the CFG does not change during the transform, so DT queries should be
executed quickly.
If you see compile time slowness from this, please revert.
Differential Revision: https://reviews.llvm.org/D96119
Function `replaceMathCmpWithIntrinsic` artificially limits the scope
of the optimization, setting a requirement of two instructions be in
the same block, due to two reasons:
- usage of DT for more general check is costly in terms of compile time;
- risk of creating a new value that lives through multiple blocks.
Because of this, two semantically equivalent tests may be or not be the
subject of this opt depending on where the binary operation is located.
See `test/CodeGen/X86/usub_inc_iv.ll` for motivation
There is one important particular case where this limitation is too strict:
it is when the binary operation is the increment of the induction variable.
As result, the application of this opt becomes fragile and highly reliant on
where other passes decide to place IV increment. In most cases, they place
it in the end of the latch block, killing the opt opportunity (when in fact it
does not matter where to insert the actual instruction).
This patch handles this particular case separately.
- The detector does not use dom tree and has constant cost;
- The value of IV or IV.next lives through all loop in any case, so this should not
create a new unexpected long-living value.
As result, the transform becomes more robust. It also seems to lead to
better code generation in some cases (see `test/CodeGen/X86/lsr-loop-exit-cond.ll`).
Differential Revision: https://reviews.llvm.org/D96119
Reviewed By: spatel, reames
This patch is a part of D93817 and makes transformations in CodeGen use poison for shufflevector/insertelem's initial vector element.
The change in CodeGenPrepare.cpp is fine because the mask of shufflevector should be always zero.
It doesn't touch the second element (which is poison).
The change in InterleavedAccessPass.cpp is also fine becauses the mask is of the form <a, a+m, a+2m, .., a+km> where a+km is smaller than
the size of the first vector operand.
This is guaranteed by the caller of replaceBinOpShuffles, which is lowerInterleavedLoad.
It calls isDeInterleaveMask and isDeInterleaveMaskOfFactor to check the mask is the desirable form.
isDeInterleaveMask has the check that a+km is smaller than the vector size.
To check my understanding, I added an assertion & added a test to show that this optimization doesn't fire in such case.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D94056
Recently a few patches are made to move towards using select i1 instead of and/or i1 to represent "a && b"/"a || b" in C/C++.
"a && b" in C/C++ does not evaluate b if a is false whereas 'and a, b' in IR evaluates b and uses its result regardless of the result of a.
This is problematic because it can cause miscompilation if b was an erroneous operation (https://llvm.org/pr48353).
In C/C++, the result is simply false because b is not evaluated, but in IR the result is poison.
The discussion at D93065 has more context about this.
This patch makes two branch-splitting optimizations (one in SelectionDAGBuilder, one in CodeGenPrepare) recognize
select form of and/or as well using m_LogicalAnd/Or.
Since it is CodeGen, I think this is semantically ok (at least as safe as what codegen already did).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93853
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
Clang FE currently has hot/cold function attribute. But we only have
cold function attribute in LLVM IR.
This patch adds support of hot function attribute to LLVM IR. This
attribute will be used in setting function section prefix/suffix.
Currently .hot and .unlikely suffix only are added in PGO (Sample PGO)
compilation (through isFunctionHotInCallGraph and
isFunctionColdInCallGraph).
This patch changes the behavior. The new behavior is:
(1) If the user annotates a function as hot or isFunctionHotInCallGraph
is true, this function will be marked as hot. Otherwise,
(2) If the user annotates a function as cold or
isFunctionColdInCallGraph is true, this function will be marked as
cold.
The changes are:
(1) user annotated function attribute will used in setting function
section prefix/suffix.
(2) hot attribute overwrites profile count based hotness.
(3) profile count based hotness overwrite user annotated cold attribute.
The intention for these changes is to provide the user a way to mark
certain function as hot in cases where training input is hard to cover
all the hot functions.
Differential Revision: https://reviews.llvm.org/D92493
optimizeGatherScatterInst does nothing specific to fixed length vectors
but uses FixedVectorType to extract the number of elements. This patch
simply updates the code to use VectorType and getElementCount instead.
For testing I just copied Transforms/CodeGenPrepare/X86/gather-scatter-opt.ll
replacing `<4 x ` with `<vscale x 4`.
Differential Revision: https://reviews.llvm.org/D92572
Text section prefix is created in CodeGenPrepare, it's file format independent implementation, text section name is written into object file in TargetLoweringObjectFile, it's file format dependent implementation, port code of adding text section prefix to text section name from ELF to COFF.
Different with ELF that use '.' as concatenation character, COFF use '$' as concatenation character. That is, concatenation character is variable, so split concatenation character from text section prefix.
Text section prefix is existing feature of ELF, it can help to reduce icache and itlb misses, it's also make possible aggregate other compilers e.g. v8 created same prefix sections. Furthermore, the recent feature Machine Function Splitter (basic block level text prefix section) is based on text section prefix.
Reviewed By: pengfei, rnk
Differential Revision: https://reviews.llvm.org/D92073
AFAICT all other set/map are correctly cleared in `runOnFunction`.
With assertion enabled this causes a crash when the module is freed and potentially if a later pass delete the instruction (not observed in real world though). Without assertion this can potentially cause confusing result when running on a new Function/Module.
Reviewed By: loladiro
Differential Revision: https://reviews.llvm.org/D84031
This change introduces a new IR intrinsic named `llvm.pseudoprobe` for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
A pseudo probe is used to collect the execution count of the block where the probe is instrumented. This requires a pseudo probe to be persisting. The LLVM PGO instrumentation also instruments in similar places by placing a counter in the form of atomic read/write operations or runtime helper calls. While these operations are very persisting or optimization-resilient, in theory we can borrow the atomic read/write implementation from PGO counters and cut it off at the end of compilation with all the atomics converted into binary data. This was our initial design and we’ve seen promising sample correlation quality with it. However, the atomics approach has a couple issues:
1. IR Optimizations are blocked unexpectedly. Those atomic instructions are not going to be physically present in the binary code, but since they are on the IR till very end of compilation, they can still prevent certain IR optimizations and result in lower code quality.
2. The counter atomics may not be fully cleaned up from the code stream eventually.
3. Extra work is needed for re-targeting.
We choose to implement pseudo probes based on a special LLVM intrinsic, which is expected to have most of the semantics that comes with an atomic operation but does not block desired optimizations as much as possible. More specifically the semantics associated with the new intrinsic enforces a pseudo probe to be virtually executed exactly the same number of times before and after an IR optimization. The intrinsic also comes with certain flags that are carefully chosen so that the places they are probing are not going to be messed up by the optimizer while most of the IR optimizations still work. The core flags given to the special intrinsic is `IntrInaccessibleMemOnly`, which means the intrinsic accesses memory and does have a side effect so that it is not removable, but is does not access memory locations that are accessible by any original instructions. This way the intrinsic does not alias with any original instruction and thus it does not block optimizations as much as an atomic operation does. We also assign a function GUID and a block index to an intrinsic so that they are uniquely identified and not merged in order to achieve good correlation quality.
Let's now look at an example. Given the following LLVM IR:
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
br i1 %cmp, label %bb1, label %bb2
bb1:
br label %bb3
bb2:
br label %bb3
bb3:
ret void
}
```
The instrumented IR will look like below. Note that each `llvm.pseudoprobe` intrinsic call represents a pseudo probe at a block, of which the first parameter is the GUID of the probe’s owner function and the second parameter is the probe’s ID.
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86490
This patch changes MergeBlockIntoPredecessor to skip the call to
RemoveRedundantDbgInstrs, in effect partially reverting D71480 due to
some compile-time issues spotted in LoopUnroll and SimplifyCFG.
The call to RemoveRedundantDbgInstrs appears to have changed the
worst-case behavior of the merging utility. Loosely speaking, it seems
to have gone from O(#phis) to O(#insts).
It might not be possible to mitigate this by scanning a block to
determine whether there are any debug intrinsics to remove, since such a
scan costs O(#insts).
So: skip the call to RemoveRedundantDbgInstrs. There's surprisingly
little fallout from this, and most of it can be addressed by doing
RemoveRedundantDbgInstrs later. The exception is (the block-local
version of) SimplifyCFG, where it might just be too expensive to call
RemoveRedundantDbgInstrs.
Differential Revision: https://reviews.llvm.org/D88928
Instcombine limits converting phi types to simple loads and stores. This
does the same in codegenprepare, not processing phis that are not
simple.
Note that volatile loads/store ISel will happily convert between float
and int. Atomics are more likely to always be integer. This just keeps
things simple and doesn't process either.
Differential Revision: https://reviews.llvm.org/D83770
This patch fixes a problem of the commit 52cc97a0.
A test case is created to demonstrate the crash caused by
the instruction iterator invalidated by the recursive
removal of dead operands of assume. The solution restarts
from the blocks's first instruction in case CurInstIterator
is invalidated by RecursivelyDeleteTriviallyDeadInstructions().
Reviewed By: bkramer
Differential Revision: https://reviews.llvm.org/D87434
The recently added optimizePhiType algorithm had no checks to make sure
it didn't continually iterate backward and forth between float and int
types. This means that given an input like store(phi(bitcast(load))), we
could convert that back and forth to store(bitcast(phi(load))). This
particular case would usually have been simplified to a different load
type (folding the bitcast into the load) before CGP, but other cases can
occur. The one that came up was phi(bitcast(phi)), where the two phi's
of different types were bitcast between. That was not helped by a dead
bitcast being kept around which could make conversion look profitable.
This adds an extra check of the bitcast Uses or Defs, to make sure that
at least one is grounded and will not end up being converted back. It
also makes sure that dead bitcasts are removed, and there is a minor
change to include newly created Phi nodes in the Visited set so that
they do not need to be revisited.
Differential Revision: https://reviews.llvm.org/D82676
This helps SelectionDAGBuilder recognize the splat can be used as a uniform base.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D86371
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
The arm backend does not handle select/select_cc on vectors with scalar
conditions, preferring to expand them in codegenprepare instead. This
usually works except when optimizing for size, where the optsize check
would end up overruling the backend isSelectSupported check.
We could handle the selects in ISel too, but this seems like smaller
code than trying to splat the condition to all lanes.
Differential Revision: https://reviews.llvm.org/D86433
CodeGenPrepare keeps fairly close track of various instructions it's
seen, particularly GEPs, in maps and vectors. However, sometimes those
instructions become dead and get removed while it's still executing.
This triggers AssertingVH references to them in an asserts build and
could lead to miscompiles in a release build (I've only seen a later
segfault though).
So this patch adds a callback to
RecursivelyDeleteTriviallyDeadInstructions which can make sure the
instruction about to be deleted is removed from CodeGenPrepare's data
structures.
For the GetElementPtr case in function
AddressingModeMatcher::matchOperationAddr
I've changed the code to use the TypeSize class instead of relying
upon the implicit conversion to a uint64_t. As part of this we now
check for scalable types and if we encounter one just bail out for
now as the subsequent optimisations doesn't currently support them.
This changes fixes up all warnings in the following tests:
llvm/test/CodeGen/AArch64/sve-ld1-addressing-mode-reg-imm.ll
llvm/test/CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
Differential Revision: https://reviews.llvm.org/D83124
If a collection of interconnected phi nodes is only ever loaded, stored
or bitcast then we can convert the whole set to the bitcast type,
potentially helping to reduce the number of register moves needed as the
phi's are passed across basic block boundaries. This has to be done in
CodegenPrepare as it naturally straddles basic blocks.
The alorithm just looks from phi nodes, looking at uses and operands for
a collection of nodes that all together are bitcast between float and
integer types. We record visited phi nodes to not have to process them
more than once. The whole subgraph is then replaced with a new type.
Loads and Stores are bitcast to the correct type, which should then be
folded into the load/store, changing it's type.
This comes up in the biquad testcase due to the way MVE needs to keep
values in integer registers. I have also seen it come up from aarch64
partner example code, where a complicated set of sroa/inlining produced
integer phis, where float would have been a better choice.
I also added undef and extract element handling which increased the
potency in some cases.
This adds it with an option that defaults to off, and disabled for 32bit
X86 due to potential issues around canonicalizing NaNs.
Differential Revision: https://reviews.llvm.org/D81827
When the zext gets promoted, it used to retain the original location,
which pessimizes the debugging experience causing an unexpected
jump in stepping at -Og.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46120 (which also
contains a full C repro).
Differential Revision: https://reviews.llvm.org/D81437
The promotion machinery in CGP moves instructions retaining
debug locations. When the transformation is local, this is mostly
correct, but when instructions are moved cross-BBs, this is not
always true and causes jumpiness in line tables. This is the first
of a series of commits. sext(s) and zext(s) need to be treated
similarly.
Differential Revision: https://reviews.llvm.org/D81879
